Search found 69 matches

by itai007
13 Sep 2010
Forum: MultiCharts
Topic: Trendlines not working while optimizing signals
Replies: 3
Views: 510

Re: Trendlines not working while optimizing signals

Hi.
Thank you for bringing this to their attention.

I find it also a problem you cant research TrendLines as you can with other indicators that you want to trade with.

MC , what needs to be done for this to work ?
by itai007
19 Oct 2009
Forum: MultiCharts
Topic: Problems with IQ-Feed data
Replies: 2
Views: 1134

Any more ideas? MC can you look into this ?

Problems with some symbols. while it may help to have the correct setup for each symbol in QM , one can only call " exchange stats " such as TICK , "indexs" and not futures.

Thanks
by itai007
14 Oct 2009
Forum: MultiCharts
Topic: Problems with IQ-Feed data
Replies: 2
Views: 1134

Problems with IQ-Feed data

I have several symbols that just will not stream live (some history will load but not always) using IQ Feed. This wasn't the case up until 2 weeks ago. Since then , all "exchange stats" such as TICK or Nyse up and down volume , dont update any more in MC. The chart will load with some history but wi...
by itai007
15 Sep 2008
Forum: MultiCharts
Topic: "Bid & Ask" modification help needed
Replies: 6
Views: 2004

ABC is so right!!

TJ I second your request, this would be extremely useful. I would like to see reserved words for the following: Bid/Ask prices and corresponding volume for the next X ticks (depending on the book size). As far as I know the data providers send if a trade was at the Bid or Ask, so it should be possi...
by itai007
28 May 2008
Forum: MultiCharts
Topic: IQFeed 4.4.0.3 Compatibility
Replies: 9
Views: 2452

There where yesterday after install

I complitly removed all related components and saved the new verssion in another folder than the pre verssion.
Installed again and today works allthough take a long long time to load charts
by itai007
28 May 2008
Forum: MultiCharts
Topic: IQFeed 4.4.0.3 Compatibility
Replies: 9
Views: 2452

dosnt work. cant get any data.

Uninstalled and reinstalled pre verssion and now it dose work
by itai007
26 Mar 2008
Forum: MultiCharts
Topic: Gaps in chart w/Beta II Hotfix
Replies: 10
Views: 2601

same problem with Beta2

IQfeed same problrm
by itai007
25 Mar 2008
Forum: MultiCharts
Topic: TS support CAN you answer?? BUG with AUTO EXECUTION!!
Replies: 1
Views: 1016

TS support CAN you answer?? BUG with AUTO EXECUTION!!

notice the attached file. it shows the account right after a BUYTOCOVER exit order that should have bought only 2 contracts to flat. instead it bought 4 and now I am long. When MC sends exit orders for a multiple contract position it duplicates the amount of contract in the IB account. Notice that b...
by itai007
25 Mar 2008
Forum: MultiCharts
Topic: Auto Trading BUG when closing a multiple future position
Replies: 2
Views: 1289

"to sell long my statement is
if marketposition > 0 then buytocover next bar XX limit ... "

Why would you "buytocover" a long position ?
yah well as you can see I switched by mistake but that not the issue here
by itai007
24 Mar 2008
Forum: MultiCharts
Topic: Auto trading problem with IB
Replies: 3
Views: 1510

you will first have to run TWS and then under "Configure" option from the main menu go to API and you will find what you are looking for
seems you havnt read my thread or didnt see the attached file showing TWS running in the back round but missing the spesific chwck box
by itai007
24 Mar 2008
Forum: MultiCharts
Topic: Auto Trading BUG when closing a multiple future position
Replies: 2
Views: 1289

Auto Trading BUG when closing a multiple future position

Hi. My strategy seems to work with the IB TWS when there is only 1 contract in a position. When there is a pyramided position which needs to exit all contracts the MC IB get it wrong. It reverses the position instead of only closing it. this is the statement I use ... I use the intrabar order genera...
by itai007
23 Mar 2008
Forum: MultiCharts
Topic: Auto trading problem with IB
Replies: 3
Views: 1510

Auto trading problem with IB

in your help file reg auto trading you say ... 1. Run TWS. 2. Under menu select Configure then point to API and check the Enable ActiveX and Socket Clients check box. 3. Under menu select Configure then point to API and check the Fire openOrder on status' change check box. ... 3rd statement here is ...
by itai007
10 Mar 2008
Forum: MultiCharts
Topic: Problem with EntryPrice
Replies: 10
Views: 2680

I am afraid this is how it is in both MC and TS. If your entry orders are buy/sell next bar at market then you the entry price is simply the open of the next bar; if not, then you can calculate the entry price with a bit of reverse engineering: MyCurrentContracts = CurrentContracts ; MyAvgEntryPric...
by itai007
10 Mar 2008
Forum: MultiCharts
Topic: Problem with EntryPrice
Replies: 10
Views: 2680

This the way it works in TS and MC. I can't imagine a way to fix.
could you think of a way to retrieve the entry price using the label of the entry ?
by itai007
10 Mar 2008
Forum: MultiCharts
Topic: IOG with fir option
Replies: 3
Views: 1257

It works as it is supposed to work. You can check in TS. You should use 3d IOG option to solve your issue. choosing the first option and NOT the third , your logic states that it will enable each "ORDER" in the strategy to execute ones per bar and this it dose for all types of entries but for a gen...
by itai007
10 Mar 2008
Forum: MultiCharts
Topic: problem with last enrty price
Replies: 1
Views: 849

problem with last enrty price

how can you retrieve the most recent entry price of a multiple entry price strategy ? If I sell 1100 and 1101 and 1102 my avgprice is 1101 but I need the most recent entry which is 1102? If I use the the phrase entryprice(0) , MC retrieves the first order in this multiple entry series ... WHY ? does...
by itai007
09 Mar 2008
Forum: MultiCharts
Topic: Data1 trigers a signal in Data 2 problem
Replies: 1
Views: 1009

Data1 trigers a signal in Data 2 problem

Hi.
check the attached screen shot.

Id like to have this strategy execute and plot on data2 and not on data1.

How can I do this ?
by itai007
09 Mar 2008
Forum: MultiCharts
Topic: Problem with EntryPrice
Replies: 10
Views: 2680

Re: Problem with EntryPrice

If I understand correctly, using entryprice(0) should retrieve the most recent entry price of my position. But if I buy several contracts , this reserved word , still retrieves the first entry out of the multi buying process ... notice the attached screenshot showing this problem..... where L-entry...
by itai007
06 Mar 2008
Forum: MultiCharts
Topic: Problem with EntryPrice
Replies: 10
Views: 2680

Problem with EntryPrice

If I understand correctly, using entryprice(0) should retrieve the most recent entry price of my position. But if I buy several contracts , this reserved word , still retrieves the first entry out of the multi buying process ... notice the attached screenshot showing this problem..... where L-entry ...
by itai007
05 Mar 2008
Forum: MultiCharts
Topic: IOG with fir option
Replies: 3
Views: 1257

IOG with fir option

why doesn't the "ALL contracts" operator work ? There must be a way to close all position in the IOG mode with the first option selected (enable each order in the signal to 1 entry and 1 exit) I need this option because I trade only ones per bar but even if I use the all contracts for either sell or...
by itai007
05 Mar 2008
Forum: MultiCharts
Topic: PLeditor bug with output bar
Replies: 3
Views: 1540

This dosnt help

I have the same problem from time to time. You need to restart PowerLanguage Editor and if it doesn’t help go to View menu.
I try all that of course ...
but this dosnt work ...

Ill find a solution and post it later
by itai007
05 Mar 2008
Forum: MultiCharts
Topic: PLeditor bug with output bar
Replies: 3
Views: 1540

PLeditor bug with output bar

This one is realy strange .. look @ the screen shot . .. .

I cant reconect the out put bar into the pl editor window as it some how flew out of the desktop frame and is unreachable no matter what I try to do ...

now what ?
by itai007
03 Mar 2008
Forum: MultiCharts
Topic: AskSize/BidSize not supported?
Replies: 5
Views: 1943

We don't support AskSize/Bidsize keywords yet. I believe you can archive the same if you replace AskSize with ticks of Data2 and BidSize of Data3. You will need to insert data 2 and data 3 data streams in the chart and specify type of field. What do you mean by specify type of feeld ? I asked about...
by itai007
27 Feb 2008
Forum: MultiCharts
Topic: See simulated orders
Replies: 3
Views: 1381

Re: See simulated orders

I am running a system and when running real time, is there any way of seeing the orders posted by the signals? I asume you see them on the chart ... ? Is this an intrabar system (tick) or EOB ? under the view meniew you have Strategy Performance Report . use that and your live simulation will conti...
by itai007
27 Feb 2008
Forum: MultiCharts
Topic: Exiting multiple contracts dosnt work
Replies: 1
Views: 956

Exiting multiple contracts dosnt work

Hi. using this statement to exit positions with intrabar order generation enabled with the first option (enable each order in the signal to one entry and one exit) ... bidvalue has intrabarpersist... if marketposition > 0 and BidValue >= ( avgentryprice + (minmove/PriceScale*2)) then begin sell next...
by itai007
26 Feb 2008
Forum: MultiCharts
Topic: Bd / Ask size and time remaining
Replies: 7
Views: 1953

Order book and tick analysis

it would be great if MC can extend the EL to retrieve Level II, so that we can incorporate LII data into our strategies. p.s. it would be even better if we can plot LII on the chart! Absolutely! I suggested that some while back. There is quite a buzz surrounding things like volume delta and order b...
by itai007
26 Feb 2008
Forum: MultiCharts
Topic: data1, data2
Replies: 9
Views: 4636

data1 and data2

I have no problems using those terms ... here are 2 examples I use. var: counter(0); if time = SessionFirstBarTime(0,1) then counter = 0; condition1 = close of data1 > high[1] of data2; condition2 = close of data2 < Low[1] of data1; if condition1 then counter = counter+1 else if condition2 then coun...
by itai007
26 Feb 2008
Forum: MultiCharts
Topic: data1, data2
Replies: 9
Views: 4636

Re: data1, data2

Does anyone have a sample of a simple signal based on two datastreams data1 and data2? For me data1/data2 does not work and I cant find out why! Is it possible that if a function is not coded properly then the signals based on this function do not work with data1 and data2 ?? Is it possible to refe...
by itai007
24 Feb 2008
Forum: MultiCharts
Topic: automating execution with other brokers than IB
Replies: 1
Views: 769

automating execution with other brokers than IB

Hi.

What do I need to do to "capture/listen" to MC chart signals of my strategy and execute the order through another broker than IB ?

were can I learn ho to call the signals ?
by itai007
21 Feb 2008
Forum: MultiCharts
Topic: Bd / Ask size and time remaining
Replies: 7
Views: 1953

cant even be coded?

It is not available.
can I retrive this data some how ?
by itai007
20 Feb 2008
Forum: MultiCharts
Topic: position data in courser window
Replies: 1
Views: 759

position data in courser window

Hi. I think In TS when you have a buy sell signal or multiple ones on the chart , you can see the information in the coursers window when you left click on the charts bar with the signals.. it shows , AVG buy , AVG sell which is missing in MC and you need all the time to open the SPR to know whats u...
by itai007
20 Feb 2008
Forum: MultiCharts
Topic: point or tick value configuration for backtesting
Replies: 12
Views: 2593

Itail, I’m sure that you can you use your indicators with the settings successfully. You should understand that price scale min move big point value are basis settings that you need to calculate anything in your indicators. If you need “dax future which has a min move of 0.5 per tick” then simply s...
by itai007
19 Feb 2008
Forum: MultiCharts
Topic: RSI intraday - anyone please help
Replies: 7
Views: 1912

Thank You itai would u please guide me on which part of the script i need to change, and add intrabarpersist, script for RSI LE: [IntrabarOrderGeneration = true] inputs: Price( Close ), Length( 12 ), OverSold( 50 ) ; variables: MyRSI( 0 ) ; MyRSI = RSI( Price, Length ) ; if Currentbar > 1 and MyRSI...
by itai007
19 Feb 2008
Forum: MultiCharts
Topic: Bd / Ask size and time remaining
Replies: 7
Views: 1953

Bd / Ask size and time remaining

Hi. How can I retrieve the bid size and ask size ? couldn't find any function for that or reserved word. second , how can I retrieve the time remaining for the current bar interval (i assume the correct question is unit remaining as this data is different for intraday time based bars and volume or t...
by itai007
19 Feb 2008
Forum: MultiCharts
Topic: RSI intraday - anyone please help
Replies: 7
Views: 1912

Rsi intrabar

First I think that while in the intrabar mode , MC monitors the strategy for the conditions and then triggers the signal but if you turn status off / on or refresh the chart you might get other "trades" because the RT data monitored is not necessary filed in the history or data base so the "past" do...
by itai007
19 Feb 2008
Forum: MultiCharts
Topic: point or tick value configuration for backtesting
Replies: 12
Views: 2593

Itai, I don't think I understand your suggestion. Why does one need add additional SPR setting if we already make something that works? All things I told you are described in our Help system. Well if for example you use a marketprofile or MD indicator on you chart , then the price movement on the c...
by itai007
19 Feb 2008
Forum: MultiCharts
Topic: Using IntraBarPersist
Replies: 6
Views: 1629

have posted several posts on this issue

search my user name and youll find all of them with the support I got ...

I still find using this challenging .. especially for my intrabar strategies ..

good luck
by itai007
18 Feb 2008
Forum: MultiCharts
Topic: point or tick value configuration for backtesting
Replies: 12
Views: 2593

PriceScale = 1/100
BigPointValue = 25
Min movement =50

As a result a dollar value of minimal movement will be $12.5.

Don't forget to restart charts!
I think its time you guys enable us users to simply change or modify the setting in the SPR backtesting thing ....

instead.

thanks for the help
by itai007
18 Feb 2008
Forum: MultiCharts
Topic: point or tick value configuration for backtesting
Replies: 12
Views: 2593

cant chage tht

Please set it in QM manually.
If I understand correctly, you are suggesting I set the dax follows

1/100

min move 12.5

big point 50

if so , this then screws up the charts scale and other indicators that use this....

but the SPR might then show 50$ (euro) for 1 point ... ?
by itai007
18 Feb 2008
Forum: MultiCharts
Topic: point or tick value configuration for backtesting
Replies: 12
Views: 2593

PointValue in the SPR is a bigpoint value. So if you typed 100 in QM, it will show 100 in the SPR. I assume you want to see min move dollar value. You can see that it works properly in Trade List. However I believe that you use wrong settings - "I manualychosen (1/100 , 50 for min move and 100 for ...
by itai007
18 Feb 2008
Forum: MultiCharts
Topic: point or tick value configuration for backtesting
Replies: 12
Views: 2593

point or tick value configuration for backtesting

Hi. Attached you can find screen shot showing that for the XGH8 symbol which is the dax future through IQfeed , the settings in the backtesting for point value is 100$ but should be 25 Euro. For some reason you cant search for the Dax future through the IQfeed API so you need to manualy add this sym...
by itai007
18 Feb 2008
Forum: MultiCharts
Topic: Esignal gives us the shaft
Replies: 14
Views: 2358

there is no attachment

your example is missing the attachment you point to
by itai007
15 Feb 2008
Forum: MultiCharts
Topic: intrabar order generation - can it be done with MC ?????????
Replies: 8
Views: 2032

This works funny

It doesn't. attached you can find the result of an intrabar order the upper indicator visually shows the threshold +1 / -1 which generate the orders. So the buy signals you see wer the results of the fluctuation of the bar downwards and the indicator did go down through the -1 threshold. but, BUT!!...
by itai007
15 Feb 2008
Forum: MultiCharts
Topic: intrabar order generation - can it be done with MC ?????????
Replies: 8
Views: 2032

this feature dosnt work!!

It doesn't. I have your latest Beta you asked me to d/l the order triggers @ the end of the bar although Im sitting in front of this and seeing it should generate unlimited entry/exits as the bar fluctuates .. still what it dose is check if the condition was met intrabar and will trigger the trade ...
by itai007
15 Feb 2008
Forum: MultiCharts
Topic: intrabar order generation - can it be done with MC ?????????
Replies: 8
Views: 2032

Before I do ... please answer this

Install MC 3 Beta please
Dose using the intrabar order generation require the use of the intrabapersist function in the code or not ?

Also , is this not available in my version some other way ?
by itai007
15 Feb 2008
Forum: MultiCharts
Topic: intrabar order generation - can it be done with MC ?????????
Replies: 8
Views: 2032

this is not available .. where exactly?

Select Format Signals->Highlight a signal->Format->Intra-Bar Order Generation

I dont have this option can you please screen shot this ?

Im using 2.1.999.999
by itai007
15 Feb 2008
Forum: MultiCharts
Topic: intrabar order generation - can it be done with MC ?????????
Replies: 8
Views: 2032

intrabar order generation - can it be done with MC ?????????

how can I make MC trigger stratergy orders based on the tick and not the end of bar condition ?
by itai007
14 Feb 2008
Forum: MultiCharts
Topic: intrabar backtesting
Replies: 1
Views: 692

intrabar backtesting

Hi
How can I make the stratergy triger intrabar and not end of bar ?

In TS you have this option in the properties of the stratery.

I couldnt find this feature here ..
or am I missing something

Thanks
by itai007
06 Feb 2008
Forum: MultiCharts
Topic: using intrabarpersist
Replies: 7
Views: 1852

intrabarpersist

can any 1 help me genrate these intrabar orders?
by itai007
04 Feb 2008
Forum: MultiCharts
Topic: Indicator for 30 min braket
Replies: 3
Views: 880

30 min cycle

As I wrote in the original post , this is not a 30 min bar indicator. This needs to work using smaller bar intervals than 30 min bars. If I am trying to plot the highest high and lowest low of the last 30 min bracket while using a 3 min chart, I cant use Highest(h,10) as it will capture prices out s...
by itai007
04 Feb 2008
Forum: MultiCharts
Topic: using intrabarpersist
Replies: 7
Views: 1852

Intrabarpersist help

Im sorry but I cant make out of this. I need the full code for the following (example) As this replicates an internal fluctuation any or most bars have due to fair values specifically with futures. I would like to do the following: interval is 1 minute chart Rsi(c.5) intrabarpersist for intrabar tra...
by itai007
01 Feb 2008
Forum: MultiCharts
Topic: Indicator for 30 min braket
Replies: 3
Views: 880

30 min braket-cycle

any idea on this
by itai007
01 Feb 2008
Forum: MultiCharts
Topic: using intrabarpersist
Replies: 7
Views: 1852

intrabarpersist

may be I didn't make my self clear ... I would like my strategy to sell intrabar when a threshold is hit. with the rsi example , using a 5 min bar with rsi(c,14) and sell threshold 70, it might trigger several times with the fluctuation of the bar. different from what I asked in the original post, I...
by itai007
30 Jan 2008
Forum: MultiCharts
Topic: using intrabarpersist
Replies: 7
Views: 1852

using intrabarpersist

Hi..

lets say I would like to buy when the current 3 min bar rsi crosess over 70 the second it happens within the bar and only 1.

So the minute the second rsi crosess over 70 I buy but will not repeet that trigger as long as my marketposition > 0

how do I code this

thanks
by itai007
30 Jan 2008
Forum: MultiCharts
Topic: Indicator for 30 min braket
Replies: 3
Views: 880

Indicator for 30 min braket

Hi.
How can I code an indicator that follows 30 min cycles that are not the last 30 min but those that are 9-9:30
9:30-10:00
10:00-10:30 etc' ... .


so I can capture highest highs and lows for a "real" 30 min braket using other (small then 30) chart interval than 30min

thanks
by itai007
11 Dec 2007
Forum: User Contributed Studies and Indicator Library
Topic: Hull Moving Average Trading System
Replies: 9
Views: 12352

I cant compile this. pls help

could some1 post an actual code attachment to be downloaded and imported ?

Thanks
Itai
by itai007
11 Dec 2007
Forum: MultiCharts
Topic: How do i do this ?
Replies: 12
Views: 3228

to ABC - is that lower indicator MACD ?

what is that lower indicator in your chart ?
the last chart you posted here prior to my/this messege ?

can you share it or if it is MACD share the exact inputs ?

thanks
by itai007
11 Dec 2007
Forum: MultiCharts
Topic: IQfeed New DLL dosnt work
Replies: 7
Views: 2021

thank you for the help issue solved

looking forward for the new help file/manual ...

thanks for all.

regards
by itai007
07 Dec 2007
Forum: MultiCharts
Topic: IQfeed New DLL dosnt work
Replies: 7
Views: 2021

How to DTN API

First my apologize. I didnt mean to sound the way it came out. I thought you forgot the tab as it seemed so natural you did ... I know understand this is not the case. sorry. You need to make it clear for users why things are the way they are especialy if they are diferent. Can you know explain exac...
by itai007
07 Dec 2007
Forum: MultiCharts
Topic: QuoteManager bulk-delete ?
Replies: 5
Views: 1557

limitation

can I tell it to save only 6 month of data no more so it will work as if FIFO ?

is there any managment options for the data base as a hole and not per symbol ?

can I tell it to save only minute data for spesific symbols and not tick ?
by itai007
01 Dec 2007
Forum: MultiCharts
Topic: QuoteManager bulk-delete ?
Replies: 5
Views: 1557

QuoteManager bulk-delete ?

I accumulated tuns of tick data from the last 2 years on 100 symbols world wide using various datafeeds including DDE. For disk space issues , how can I automatically ask the data manager to "bulk-delete" a specific date range for all data base object as it is impossible to delete the first 3 month ...
by itai007
01 Dec 2007
Forum: MultiCharts
Topic: Why I won't change from TS 8 to MC
Replies: 17
Views: 5755

First setup is alot of work but then you have no data-issues

Although MC posts some data feeds available through the selection that actually don't really work with MC (like the problems Im having with IQfeed , ) Im sorry to say you cant compare TS to MC on data issues because through MC you can have you own world wide multi exchange trading platform . TS has ...
by itai007
01 Dec 2007
Forum: MultiCharts
Topic: IQfeed New DLL dosnt work
Replies: 7
Views: 2021

New file didnt fix anything. IQfeed still not working!

try looking up
Dax future or mini SP500.
(xgz7 , @esz7)
Try looking for indexs (you forgot puting a TAB for indexes!).

also , if you look for the futures I mention up here , youll notice that you are getting options instead.

When is the DTN feed be available for MC customer?
by itai007
23 Nov 2007
Forum: MultiCharts
Topic: IQfeed New DLL dosnt work
Replies: 7
Views: 2021

IQfeed New DLL dosnt work

you posted an updated DLL for the IQfeed. First , I cant move into the folder you mention. It will not let you over write second , I try to rename the exisiting dll and then I move the new one. This makes MC not identify the IQfeed any more. Third : I delete the new file from the datafeed folder and...
by itai007
23 Nov 2007
Forum: MultiCharts
Topic: IQFeed DLL update
Replies: 2
Views: 2558

what do I do with the file?

after I download the zip file with the DLL , what do I do with it ?
by itai007
02 Nov 2007
Forum: MultiCharts
Topic: help -New verssion - intraday charts not loading
Replies: 1
Views: 616

help -New verssion - intraday charts not loading

2.1.999.999

chart stay waiting for data and never load.

when changing to daily/weekly/monthly not intraday .. charts load.

using esignal

tried on AX Z&-DT
ES #F

itai
by itai007
15 Jun 2007
Forum: MultiCharts
Topic: DDE Bar Compression Problems in MC 2.0
Replies: 2
Views: 1016

Kate Fixed it.

As you can see, I was a frustrated customer but, Kate came along and fixed the problem.
Turned out I was missing a file although I have just installed the 2.0 as a new clean install on a new machine.

Still I am glad this was solved. I will post again if this problem accures again.

thank you.
by itai007
14 Jun 2007
Forum: MultiCharts
Topic: GlobalDDE on Beta 2.1.880
Replies: 2
Views: 1327

What is Live support

what do I need to do ?
Also please see my new post itai007 (it shows screen shots of the problem and it is more indepth explanation of it.
by itai007
14 Jun 2007
Forum: MultiCharts
Topic: DDE Bar Compression Problems in MC 2.0
Replies: 2
Views: 1016

DDE Bar Compression Problems in MC 2.0

Using Version 2.0 with DDE. All ticks come through and I can see the last 2 days of tick data through the "edit data" window. I can export the tick data and use it in other chart programs to recreate the intraday charts in any interval (5 , 15 , 30 min etc'). But in MC I can only use either 1 tick c...

Go to advanced search