MultiCharts: Trading Software for Automated Trading and Backtesting

dupl · Is it implemented in Official Release version 5.0.2369.400 of 23 May 2009?

Is it implemented in Official Release version 5.0.2369.400 of 23 May 2009?

dupl

Yes and I did restart MC a few times to be sure.

I did delete this demo Workspaces:
Indices Demo Workspace.wsp
Stocks Demo Workspace.wsp

I will try it again next day, if I reboot windows.

dupl

The PC/Windows is freezing complete while backfilling.... from IB http://forum.tssupport.com/viewtopic.php?p=25184#25184 This thread has a test workspace to to simulate. We've reproduced the issue. It will be fixed soon. It is not a dead lock, but CPU overload. You should increase bar spacing and c...

dupl

Andrew Kirillov: Could you send workspaces without your indicators. It is possible it will help, but your studies can cause the freezing, because indicators are most CPU intensive. Since your task manager shows apprx. 200 mb for all MC process, the number of bar is not a case. Try to isolate the is...

dupl

I did copy in both directories, but no workspaces are loading in MC:

C:\Dokumente und Einstellungen\All Users\Anwendungsdaten\TS Support\MultiCharts\Prebuilt
C:\Dokumente und Einstellungen\me\Anwendungsdaten\TS Support\MultiCharts\Prebuilt

dupl

Chart will not be drawn drawn, if the chart has several symbols/data sources and one of them has not data in the chosen period. :cry: This happen, e.g. if I chart BID-ASK and Trade data in one chart, but sometimes the Trade data source has no data in that period because its illiquid security. But o...

dupl

Why do you need to make them prebuilt? Because I would like to choose the option "Open prebuilt workspaces" under Preferences / Workspace. This option because I dont want load all from previous session and dont want to choose Open last active . I would like to have e.g. 8 special workspaces as defa...

dupl

Could you send me your workspaces for tests? Its too private. But I can say that I have in most of the Workspaces 2-4 charts and the each charts has 3-6 datasources (Bid, Ask, Trade). I have 4 Gig of RAM. 1.) But do you see the idea to help to have an an orientation to handle MC in its capabilities...

dupl

Does it freeze as a dead lock or just slow down your pc? Both. Depends on how many bars loaded, I think. If I load a workspace with ~100,000 bars too my other open worspaces I use every day, than the complete PC freeze as a dead lock, for around 2-4 Minutes. Than a few seconds I can move the mouse,...

dupl

Hello, is it possible to view somewhere in MC the sum of all loaded bars? I need an orientation to handle MC in its capabilities! Latterly with Version 5 Beta 2 (Build 1781) MC is freezing if I have open more than ~10 workspaces. But maybe its only that I have to many bars loaded? But how to find ou...

dupl

Hello,

this version loads data in (Data Server Mode: Online + Download missing historical data) from IB faster.
BUT with some charts with data of around 100,000 quotes, my PC is freezing all the time if I want scroll the chart or something else.

This didnt happen with the version before!

dupl

Hello,

how can I make prebuilt Workspace? In MultiCharts Help there is no topic about.

Thanks

dupl

Hello, I would like to have a few "all at once" actions in MC. E.g.: - Format Symbol window --Data Range If you have several symbols in one chart, its inconvenient to do the same action e.g. (change Data Range) for 7 symbols separate. Thanks PS: In QM its possible to select several symbols and e.g. ...

dupl

BID-ASK Native "calendar" spreads.
From e.g. InteractiveBrokers...

dupl

Hi T6, nice not to be alone! :D How is the best way to test it? Today e.g. I opened a lot of data, my MultiCharts.exe task had more than 1,2GB "memory usage history". But if I closed a workspace than around 500MB less memory were used, but when opening again the workspace it loads a lot of data agai...

dupl

Hi T6, If you are talking about a new mechanism of saving data that would prevent losing quotes collected while working with MultiCharts in case of crashes, unexpected terminations etc, it will be available in the upcoming MC 5.0 beta 3. At the moment, there is a temporary cache file that saves all...

dupl · Is thisBeta Version 5.0.2106.204 2 March 2009 the called: **MC 5.0 beta 3?**

Is thisBeta Version 5.0.2106.204 2 March 2009 the called:
MC 5.0 beta 3?

dupl

can you also make a manual save button? I trade the ES as well as the HSI. right now I have to exit and restart MC after the ES market, so that the data can be saved. A manual button would save a lot of restarting. Yes really! Saving data is 50% the work of MC in my case. Today TWS crashed MC lost ...

dupl

Hi guys, As I mentioned before, in future versions of MC, a progress bar will be shown on exiting the program. It will tell you if MultiCharts is in the process of saving data and how much data is left to save. Also, we will add an option that will allow saving the received data at regular interval...

dupl

What's the difference?

The difference. Native is independent from synthetic.

dupl

Somebody able to show me this option?

Thanks

dupl

Again! There is a difference between native and synthetic spreads/combinations/baskets! I need native ! People have very often problems to differentiate this fact. Of course synthetic spreads/combinations/baskets are possible in a lot of programms... but not native spreads/combinations/baskets! :idea:

dupl

Hi dupl,

if you apply indicators duing backfilling they will be calculated as the data is coming in,

This would be nice.
Where do I apply? In Format Study, I didnt found this option.

Thanks

dupl

Does this Custom basket symbols also mean native Spread Charts/Symbols?
Spread Charts/Symbols is a custom basket subset

Yes but is this basket native or synthetic?

In MC you can do only synthetic, but I would need native Spread Charts/Symbols, e.g. from IB.

dupl

I think it may depends on what you do...

dupl

Hello,

please make computation of indicators possible while data backfilling.
Sometimes (with IB data) it need hours to backfill data and its sad that you cant see the indicator on the data already loaded.

Thanks

dupl

Hello,
I counted today 3 minutes which MC needs to start! This is really long time, isn't it?
With start I mean, to get the dialogue for the workspaces.

dupl

Hi dupl,

Authorization module has been fixed in the 4.0 version. Upgrade your MC and the problem with the slow launch should go.

Regards.

I have still this lack, like described above.

dupl

Good.
Thanks

dupl

Hello,
in the past it was discussed (I dont find the thread), why its not possible to resize dialogue windows.
Now I started a new thread:
http://forum.tssupport.com/viewtopic.ph ... highlight=

I hope I am not alone!?

dupl

Hello, in the past it was discussed (I dont find the thread), why its not possible to resize dialogue windows. In Beta 5v its still not possible. E.g. - Insert Symbols dialogue - workspaces on start Its bad usability, it waste concentration energy of the user to fumble with this little scrollbars an...

dupl

tradenavigator has a button that made itself a backup of all this file itself and another that you use for the restore.

MC should have it too.

dupl

But my question was:

Could you stop this senseless requests outside of authorized EOD eSignal Time?

Dont know how MC could handle this, without the requests.

dupl

If I have a workspace with charts of both IB data and eSignal EOD and if I open it outside of "authorized EOD Day Time Use" I get thousand of this lines in the event log... from eSignal. It looks that is disturbing and take cpu performance. Could you stop this senseless requests outside of authorize...

dupl

calculation of indicators with more than one input. The indicator should not only be calculated by one DataSeries update e.g. DataSeries1, if the indicator uses: DataSeries1 DataSeries2 DataSeries3 DataSeries4 ... It should be updated by every DataSeries used for the indicator. E.g. if you build an...

dupl

Do I need to fill out the webform as registered user for the beat?

dupl

I start first QM, than MC. QM starts in normal time like other software. Of MC i see only the logo for 1-2 minutes... in TaskManager I see e.g. tsserver.exe etc. Problem: If I start first MC and shorty after it QM I get error messages like this "Server is busy" Options: - change to... - repeat - can...

dupl

bucks,

I/we support could not solve it via remote at my PC. It looks like an Excel problem (IB DDE-link problem)...

dupl

Hello,

why does MC take so much time to start? Is it because verifying the license?

Thanks

dupl

Hi vienna,

How many charts do you usually use? What is the resolution? How many bars do you have in each chart?

It would be nice if QM or MC could count the bars. Could you implement an option/coulnm in QM (see screenshot) for charted bars of a symb?

And an option to sum the bars.

Thanks

dupl

dupl

Maybe
http://forum.tssupport.com/viewtopic.ph ... hlight=dde

dupl

Hello tssupport,

why has MC no IB Template? This is very sad.

To handle the Universal DDE makes me very crazy!

dupl

If RTD would work well, very nice.

This would go together with my question (idea) here:
http://forum.tssupport.com/viewtopic.php?t=4388

dupl

I am trying to connect the dde to ibbrokers sample worksheet, it works fine referencing the first page ...

How did you?

Thanks

dupl

Hello,
this is an IB DDE-Link:

Code: Select all

=UserName|tik!id0?last

How can I use this in MC with Universal DDE? I get no quotes in MC/QM.

Thanks

dupl

Hello,
can somebody post a DDE-Link, thats working with IB's TwsDDE.xls?

Does it need the Username inside the DDE-link?

tssupport, did you never test this?

dupl

Hello,

I tried all DDE Setup Tutorials
1. http://www.tssupport.com/multicharts/tutorials/DDE.htm
2. http://www.tssupport.com/multicharts/tu ... _Excel.htm

but dont get data to MC from the TwsDDE.xls

This is very sad!

dupl

There ist a second problem!

if I shut down MC tsServer.exe will be NOT closed.
Only if I shut down also QM!

dupl

:idea: :D Oh my god! Why nobody explained me my misunderstanding before? Or maybe because my English is not so god! This was the ghost: With the option 'Track Time and Price' enabled, whenever you point the cursor to a certain bar on one chart it will automatically scroll the other chart as well - t...

dupl

Marina, thanks maybe I found it! :idea: If I use the option "Show Cross" and "Track Time and Price" . I made on an other PC with MC Demo two Workspaces, 1. Workspace 2 chart windows, one with ES Future, one with YM Future. Both linked with red color and 1 Tick timeframe. 2. Workspace one chart windo...

dupl

Hello,

I need a option to fix a realtime chart to the far right position!

It worry, angers every day!

dupl

When you kill a process Windows always give you a warning that killing a process can cause loss data. I sad also: Shuting down the computer is killing tsServer.exe, but the customer thinks it is closed with MC! :!: Do you look in the Windows Taskmanager if you had shut down a Email programm etc., i...

dupl

Data source?

dupl

MCActiveX.exe
PLEditor.exe
TradingServer.exe
I wish you would make all the process name with MC prefix.
...

This are all?

tsServer.exe
MultiCharts.exe
QuoteManager.exe
StudyServer.exe
MCActiveX.exe
PLEditor.exe
TradingServer.exe

dupl

... All this might seem a bit complicated, but on the other hand this isn't something the users have to deal with a lot. Thanks. But here you sad in my eyes a little bit the opposite: Post subject: DDE Collected data lost after program not responding error if a process is killed or if the program h...

dupl

I had to "kill" in taskmanager all MC instances and processes ... 1. And it is confusing that not all MC processes have a unitary processes name. E.g.: tsServer.exe MultiCharts.exe QuoteManager.exe StudyServer.exe If you have to kill all processes by hand in the Windows Taskmanger it is not end-user...

dupl

Thanks,

it would be nice to have a "checkbox" something like this, for each symbol in the "Format Objects" window...
So we can e.g. select all symbols for a Data Range setting.

Thanks

dupl

Hello,

my computer crashed and I did click two times to start MC, because it took so long time to start...
Now I have two MC "running" but can not exit the second one!

The X of Data Server Mode is not enabled... no reaction.

Thanks

dupl

Hello,

how could this be done?
E.g. 10 symbols in a chart, and I want to edit by all 10 symbols the Data Range. All 10 symbols should have the same Data Range. I know only the way to edit all 10 symbols separately.

Thanks

dupl

Hi guys, When you go to Edit Data and choose a resolution, QuoteManager shows you all the available range of data for this resolution to let the users know what they have. Is it this feature that you want changed? No! Example: If you made selections at Data Range , than you edit e.g. the ASK. But y...

dupl

It makes me really testy.

Dozens a day I have scroll to the reight, if I jump from one Workspace to another and did change something, somewhat...

See the screenshot, one time it scrolled complete to the left, somtimes only a bit... but far enough that it is not more realtime!

dupl

I had to edit some bad ticks and ran into this annoying situation, when I change anything in the edit data window, it resets everything. Can you make our last entry the Default ?, example, edit tick data, then go to minute data, it forces you to re-enter date and time, you don't want the date and t...

dupl

We believe that informing the users that the data is going to be lost if a process is killed or if the program hasn't been terminated normally is reduntant because it should be self-understandable. This is a fallacy ! Because a normal user does not watch the taskmager and the particular processes.....

dupl

We made some adjustments that should prevent the problem, but I’m not sure it will resolve it. Please test. I have still this problem. :( It bothers no one except me? E.g., a tickchart with ESM8 (bid) and YM Jun08 (ask), datasource IB, is scrolled backwards if I use some other Workspaces and came b...

dupl

There is no more a Beta...

Official Release: 3.0.1200.4785
http://www.tssupport.com/support/downloads/

dupl

And set up a message during save so we don´t shut down our computers and losing data. Yes! Excuse, this is not understandable, why you do not inform the users that killing tsServer.exe means, losing data! Collecting data from IB or eSignal EOD also, is a lot of work an time! And users wonder, why t...

dupl

ZB 30 YEAR US TREASURY BOND ZN 10 YEAR US TREASURY NOTE ZF 5 YEAR US TREASURY NOTE ZT 2 YEAR US TREASURY NOTE The eSignal symbol (ZB) I set in Custom Settings to 1/1000, so I have aprice of e.g.: 116.250 This should be duly? But in ECBOT Exchange Settings of IB Data Source the symbol ZB, if I use t...

dupl

What do I have to do?

1. The ECBOT didnt exist in MC for eSignal (ECBT) Treasury Bonds, so I created this.
2. But now, which Symbols settings should I use, for correct plotting?
3. I want to plot more than one symbol in a chart. (e.g. Bid, Ask, Trades)

Thanks

dupl

Thanks Geoff!

But this firms are only distributors of this feed, correct?

But who is Zenfire?
Who generates/produces the Zenfire datafeed?

dupl

I did test Zenfire also, it is really fast!

Do they have a website, or who is Zenfire? Mirus Futures?

dupl

breakpoint, yes this would be very helpfull.

dupl

OK we will keep it mind. I never seen something similar in other programs so i think it will be not intuitive! However I admit that idea is quite straightforward. NT has this. In NT a workspace is all windows (T&S, DOM, Charts etc.) http://www.NT.com/HelpGuideV6/Images/NT6Workspace1.gif http://www....

dupl

is a known bug. It will be fixed in future MC versions.

Thanks.

But why can I chart the expired (ESZ7 DEC07)?

dupl

Too bad. But I found a chart where I have the (ESM8 Jun08) AND the (ESZ7 DEC07). I think it was not all the time like now, that expired contracts are not able to chart in realtime-mode. I looked in QM Edit Symbol and saw that Expiration Status is Not expired How is this possible? I never change some...

dupl

in real-time MultiCharts connects to the data feed and the data feed sends a message that this symbol does not exist. But than MC could check if the contract is expired, and if, dont connect to data feed. Only in real-time MultiCharts makes sence. I use MC from Monday to Friday in real-time. And it...

dupl

Thanks for the explanations!

The 1. way leaks, because: "won't be able to receive any real-time data from any of the providers."

Ways 2. + 3. are a lot of work every month...

I hope in MC version 3 in near future expired contracts will work without editing the symbol.

Thanks

dupl

A simple idea:
add all contracts to the chartwindow, than you have a continuos chart..
but not a continuos contract.

dupl

Receive realtime data from any Excel cell.
E.g. in the moment is is not possible to get data from Excel received over ActiveX or DDE from TWS, into MC.

dupl

Copy Chartwindow to an other Workspace.
You can only copy & paste it in the same Workspace...

dupl

What does it mean?

Online/Offline Indicator
Data Window
SVN support

Does this Custom basket symbols also mean native Spread Charts/Symbols?

Thanks

dupl

In what resolution? Could you also post a screenshot in TWS? Because it is expired you must take a time period of minimum 1 week. For a time period of 1 week, TWS can show bar resolution only in: 30 min 1 hour 1 day So, it is not relevant if a contract is expired or not, in time period of 1 week TW...

dupl

Please contact our customer support at

Excuse I am not so quick in english, so i dont like to chat.
Would be nice if you can unswer this two questions here:

Should I add the symbol a second time in QM, after the expiration?
Do the symbol lose data which are stored in MC database?

Thanks

dupl

Danilo, It is a known issue. You should Add the symbol from Data Source. It will modify your existing symbol's description and it allows us to know that it is expired symbol. So simply do it, close and re-request a chart. I dont understand this: You should Add the symbol from Data Source How can I ...

dupl

We still can't reproduce the problem. Very simple. E.g. I took the " ZN 10 YEAR US TREASURY NOTE" I have no ZN-data in database See: no-symbol5-tws.PNG The result is: [03/27/2008 22:10:41] Connecting to real-time data for ZN MAR 08 [03/27/2008 22:10:41] TWS error message: Id= 34; Code= 200; Descrip...

dupl

And what about the no-symbol problem?
Why are symbols, which were on my chartwindow the hole trading period, after the last trading day not be found from MC?

Like here the ERH8 (see: no-symbol3.PNG)

Thanks.

dupl

Data for expired contracts cannot be received from data providers

1. This is wrong. See no-symbol4-tws.PNG
2. I have a chart in MC showing me data from database. Why should I am not able to chart this data after the last tradingday of this symbol? This makes no sense. See no-symbol3.PNG

dupl

I have also this problem, that symbols who are expired now (March 08) shown in the chart with the status No Symbol

E.g. with ER2H8 see screenshot

dupl

My MC is crashing (hangs up) every evening since monday!
I changed only 4-5 symbols in QM the sessions. I use local time.

dupl

Thanks jek, i dont know TS, but ist sounds like what I described. E.g. in TWS from IB they call it settings : PS: e.g. if MC crashes you lose the arrangement of the workspaces from previous session! And than MC starts with last saved workspaces from previous session. But this is than an older one, n...

dupl

This is understandable, but it is too complicated. For me it is not understandable, why it is too complicated. :wink: If MC can store: - all workspaces from previous session You only need a third "open/save section" in the file menue. :wink: See screenshot. MC would need an additional fileformat li...

dupl

You have only the dialogue: Specify the workspaces you would like to - Open last active workspaces from previous session - Open all workspaces from previous session - Open prebuild workspaces I would like to open an individual setup of workspaces. E.g. a GOLD-workspace-setup with 5 workspaces, where...

dupl

Ok.

What about a setup of workspaces?
It would be helpfull to save several setups of workspaces.

dupl

QuoteManager is a "global" service. It does not matter where it resides, any modification is applied to all the symbols in all the charts. Yes, but i liked it in a workspace of MC, so i have QM like all ChartTABs in MC. :) I think you should have the option if you want a workspace outside or inside...

dupl

Hello,

I can not open a QuoteManager in a new workspace, the QM window is all the time outside as a separate window. I want it inside like in MC 2.1.999.999.

dupl

Hello,

what about a setup of workspaces?

Can I save several setups of workspaces?

dupl

If I open some indicators in PLE there is no code. So I have no result by inserting in a chart. I did an import with option "compile on import". And if I do an import again select all - do you really want to replace it - yes to all the same. I did again an export from MC 2.1.999.999 because this are...

dupl

Did someone test it with the latest Beta?

Thanks

dupl

I use this:

Code: Select all

inputs: DataSeries1( Close of data1 ), DataSeries2( Close of data2 ) ;

inputs: DataSeries3( Close of data3 ), DataSeries4( Close of data4 ) ;



Plot1( DataSeries1 - DataSeries4, "SprdDiff1", red );

...with 2 or more Datastreams.

dupl

Hello,

has the latest Beta fixed this problem?

Thanks

dupl

Hello MC,

can we use the BETA coevally of our licensed MC version, e.g. on a second computer?
Because you wrote, that you monitor if someone uses two instances of MC...

Thanks

dupl

Point & Figur Charts possible with MC?

Thanks

dupl

Hello,
this works.

dupl

there is no DVF8 futures provided by IB. Excuse me this february 2008 contract is expired since 16-19 January. But normaly I have no problems to chart expired contracts. For example the: november 2007 DV december 2007 DV january 2008 DV ... I can chart. But only the february 2008 not, this is the s...

dupl

We can't find it. It's not listed on the CFE exchange in Symbol Search on the interactivebrokers website.

Symbol (Root): VXD

The Logs are 200 MB

dupl

Have you tried plotting this symbol separately?

Yes, the same problem.
DVF8 (Future), CFE (Exchange) @ Interactive Brokers
Where are this logs?
Thanks

dupl

I had NO crash! Hello, I open this Workspace with this Chartwindow every day. And today sudden it says at my F8 contract No Symbol , why? I tried the following: changed in the Format Symbol Settings the Compression, the Fieled... closed an re opened the Workspace, but get anyhow No Symbol ... In Quo...

dupl

Hello dupl, We have reproduced the random behaviour of the scroll bar when simply switching between multiple windows. So we can start working on the fix. As for the other problems described in the thread, it would be really helpful if you contacted us through LiveChat and let us see what exactly it...

dupl

Hello, you create the symbol with the ConID of two legs. Every e.g. futures contract has a conid, so you can combine to symbols to one symbol e.g. calendar spread. You can get the conid over the api or on the website under contract details, Contract Identifiers (see screenshot). And this symbol "Com...

dupl

Hello,

in TWS you can chart e.g. calendar spread data (Bid/Ask) and I know it is possible to receive this data in realtime also through the api.

Can MC chart this data? Would be very nice to add this separate data from the spread orderbooks.

Thanks

dupl

do you save the changes? Hello, yes, with the option that ask me wether to save or not, if I close MC or a workspace. And I use it all the time this dialogue: --------------------------------- Save workspaces Save changes to file "akt"? Yes No Cancel --------------------------------- Thanks

dupl

Hello,

I am working and can't shut down MC, to show it.

It looks like on the screenshot:

dupl

Hello,

all windows - if I have only one in a workspace - is minimized if I start MC. If I close MC and save the workspaces all my windows are maximized.

Why are they on start minimized? So I need to maximize it every day manually. Chartwindows and QM window.

Thanks

dupl

Marina Pashkova,

could your reproduce it?

dupl

are these 2 problems related ? http://forum.tssupport.com/viewtopic.php?t=4467 For me it looks like a different problem. ...the scroll bar at the far right of my realtime charts went left (sometimes only a little bit, sometimes half the timeaxis and sometimes to the beginning of the chart). Now it ...

dupl

Rightclick the column, than you can make modifications...

Or open a chart with your symbol...

dupl

...the scroll bar at the far right of my realtime charts went left (sometimes only a little bit, sometimes half the timeaxis and sometimes to the beginning of the chart).

Now it bothers me every day...

dupl

Thanks, this works. But (like on the screenshot), sometimes the Y Scale changes. I saw this sometimes before and now watched, that this change happend if I scroll right from e.g. time 16:27:20 to 16:27:30! The decimal places in the scale of the indicator change from two to nine, only if I scroll rig...

dupl

after reboot today, all symbols are loaded in my workspaces!

dupl

Hello, MC crashed, I dont remember a special reason and after restart of MC all charts in all Workspaces shows this: <no symbol> 0 <no datafeed> :cry: See screenshot. What can I do? Thanks PS: In the QM the symbols and data are there, e.g. the 6EZ7 from the screenshot EDIT: if I try to open a new Ch...

dupl

Hello, how can I have e.g. two spread indicators on the same scale in one subchart? I have problems to do this on two ways: 1.) Have two separate spread indicators in one subchart 2.) Have two spread indicators in one script The result is like in the screenshot, the second spread indicator is not ab...

dupl

1) ZG FEB 07. This symbol is no longer existant. And must be disconnected. To disconnect the symbol, please right-click it in QuoteManager and click Disconnect Symbol. Yes I did this but it does not stop the message, than I found it in a chart if I delete it it was ok. But how can the message be st...

dupl

Hello Marina Pashkova, I can not reproduce it systematically, but it happen a lot of times in MC, if you do configurations. Like insert new chartwindows, symbols etc. Than the scroll bar at the far right of my realtime charts went left (sometimes only a little bit, sometimes half the timeaxis and so...

dupl

Has connection to the historical data server, but the error Code= 165 still occur. Why do I get this error: [11/11/2007 22:47:56] No security definition has been found: Symbol= ZG FEB 07;Ask;ECBOT;FUT;USD; I don't have a Chart with ZG FEB 07, and in QM I dont receive realtime data for this symbol. B...

dupl

Hi,

six workspaces ca. 20 charts, some with seconds resolution and a one year history...

I got a zip log file, if I had to kill the MC task, do you need it? At which email adress if you want it?

Thanks

dupl

In your screenshot it's not in the far-right position that is why you can't see the chart moving. Yes, but it was in the far-right position! And after Switching between different workspaces AND changing something in the other workspaces affected this chart scrolling. I have this very often, it is r...

dupl

Hello,

I forgott, it happend as MC received realtime data, so I could see the realtime ticks in my chart (connection to TWS was ok). But had this error messages in QM...

Now after a restart of Windows it looks ok.

dupl

Hello. For example: I have a Workspace window with two Chart windows as Tick Bar, so they scroll constantly rightwards. BUT, if I change something in an other Workspace window on a chart and go back to my two Chart windows as Tick Bar, than they are not in the present, they are in the past and I mus...

dupl

I closed all other applications, so only 1.5GB is used, but I can't close MC, or this window "PC is running out of memory".

Is ist only possible to close it over the Task-Manager?

dupl

Hello, 1.) I get sometimes this window PC is running out of memory , but can't close it, if I want to do like it says "reduce the number of bars etc." 2.) And how it is running out of memory if I have 3GB RAM installed and the system only uses 1.9GB? See screenshot. What can I do 1. and 2.? Thanks

dupl

[11/08/2007 23:19:25] TWS error message: Id= 1000065; Code= 165; Description= Historical Market Data Service query message:HMDS connection attempt failed. Connection will be re-attempted... [11/08/2007 23:19:25] TWS error message: Id= 1000093; Code= 165; Description= Historical Market Data Service ...

dupl

Hello,

I think also a windows like "Insert Symbols Into Portfolio" should be resizeable...
And why should there so much space between Lookup and the symbollist? And why is the symbollist with this fixed size?

Thanks

dupl

Hello, since a view days and special yesterday I have in QM all the time this errormessage and dont know which symbol could the causale or what else could it be?: [11/08/2007 13:51:52] TWS error message: Id= 1000002; Code= 165; Description= Historical Market Data Service query message:HMDS connectio...

dupl

Hello,

how can I change the data range of all symbols in a chart window at once?
If I right click on Format Symbols go to Settings, I have to edit all symbols Data Range separately...
I have 15 symbols and have to change more times.

Thanks

dupl

But than I don't understand why you don't give a "open source" SDK, to the programmers? If there where programmers which can do e.g. interfaces for data sources you can not support because your expenses for them are too high, than you (MC) would benefit from the programmers who can use an "open sour...

dupl

Hello, I am not a programmer. And i was not thinking that this is a business ( SDK providing the necessary info costs $4995. ) Could it not possible for TSS to offer an "universal activeX" instead/coevally of "universal DDE"? DDE is from old days and if you write here: Occasionally, there are cases ...

dupl

Some news about QuoteCenter as data source?

dupl

Hello,
how can a Data Source DLL for MC could be programmed? Is this possible?
E.g. if a customer receives realtime data in a VB programm, what/how to do/programm to send this data to MC?

Thanks

dupl

Hello, I understand not really how it works this SDK for MC. What do I have to do, if I want to programm a Data Source dll for MC, to receive data from a VB.NET application in MC? I have built an realtime indicator in VB.NET and want now chart this realtime indicator in MC. I have a friend who can p...

dupl

using the following format: =EXCEL|'[YourBookName.xls]YourSheetName'!* i use now (see screenshot): =EXCEL|'[TWS_id20.xls]sheet2'!* Is it necessary to receive the quotes in Excel over DDE, or can they also received over ActiveX? So, is it quite immaterial how Excel receives quotes in a cell? Thanks

dupl

Hello,
I now arranged the Cells in Excel like in the video tutorial, but no quotes in MC, only in Excel.
What can I try else?

Thanks

dupl

Hello,

I think did it like the video tut. described, but do not receive data.
I have only Bid Ask quotes.

Please have a look at my screenshots.
Thanks

dupl

However, the new dll should also work with the older TWS versions. Hello, what is new and what is old? :wink: ...old TWS version. Thanks E.g., I have TWS 875.3 is it old? PS: I agree that would be better, to inform on an other way like a post in the forum, maybe email, ... I also came by chance.

dupl

Hello,
if I chart BID/ASK data I have often no data for a few ticks/seconds.
Dataprovider IB, but also eSignal. It happened realtime and with data from MC database.

If there are quotes in e.g. in TWS level 1, this data should on my chart, right?
What can i do?

Thanks

dupl

Hello, they dont provide DDE for their quotes. How much work would it be, to code an extra DDE server for MC and the oanda API? But there is somethimg for TS200i and maybe also relevant for MC? Could you, or professional users say something about it, if it could work with MC? Automated FX Trading wi...

dupl

I would be also interested in this backup procedure.

And keeping my laptop and desktop synchronized,... I did not install MC on my laptop until now, is this allowed? Have one MC on desktop an one on laptop?

Thanks

dupl

Hello,
would it be possible to chart realtime data from oanda API in MC? What kind of programming is required for this? I am not a programmer, so could you give me a hint, how much would it cost ca.?

Thanks

dupl

Maybe someone else could check also, nobody interested in data of: ZG Gold from IB?

So, I will wait Marina has time to check.

dupl

Hello, Edit Data is a nice tool! But it would solve time, if a parameter in the Data Settings was changed, not all settings in the data range settings reset to "default". E.g., if I do an individual data range setting, 1. than i edit some ASK data... 2. with the same individual data range setting, I...

dupl

Thanks! I did a couple of times a reload (ctrl+R), yesterday and the gap is closed, wihtout your hint to edit the data. Its possible that you check up this Future data? Maybe the data imperfect by IB? I want to chart BID and ASK, trades are not important for me. Symbol is: ZG Gold 100 oz @ CBOT Data...

dupl

Hi,
I miss this data in MC, see screenshot of IB-Chart, time is local time (GMT+1)
13:20 - 14:20, or 06:60 - 07:20 exchange time

dupl

Hello, my computer crashed and after restart a have a gap in my data of ca. 30 minutes. I did a reload (cntrl+R) and I can see data requests in QM, but still have this data gap. I receive data of IB (IAB) Data server mode is: Online and download missing data PS: (because? ) of shuting down and resta...

dupl

Hello, I checked in QM under "Edit Data" my "Data Range" and there are 1 Minute data for 23 hours. And I can chart this data in 1 minute bars. But if I change the resolution to two minutes in my chart i have only bars for 17 hours not for 23 hours! Where are the other six hours? The 2 min bar chart ...

dupl

Use the output command print

dupl

Hello, it is possible, i think so, to export data from an indicator in easylanguage, to CSV file? Or is there an other way to do it easy? Thanks PS: TS looks like has an easy way... Select the "Data Window" from the "View" menu. Click on the icon in the upper left corner of that window, then select ...

dupl

indicator scaling is not set to "same as symbol"

YES!
Thanks a lot!

dupl

Hello,

in CHAPTER 4: Creating Indicators and StudiesYour First Indicator 55

I did a test with Plot1(Close) ;

please see the two screenshots.

Thanks

dupl

Hello,
have a demo Version (1.80.321.919) and can't open a New QuoteManager Window.

It is flickering very short a window in Multicharts, but nothing else...

Thanks

Search found 158 matches