Search found 173 matches
- 17 Feb 2010
- Forum: MultiCharts
- Topic: Multiple Time Frame Synced
- Replies: 3
- Views: 1772
Multiple Time Frame Synced
Hi, I was wondering if someone knew a way to run multiple time frames on a chart and have an indicator synced to all 3 at the same time. By this I mean I want to run the indicator on all 3 time charts and only show an alert when the indicator condition is met on all 3 at the same time. Any thoughts ...
- 25 Nov 2009
- Forum: MultiCharts
- Topic: New Chart Types You Wanted to See in MultiCharts
- Replies: 8
- Views: 3732
- 24 Oct 2009
- Forum: MultiCharts
- Topic: Bug Fixes
- Replies: 0
- Views: 786
Bug Fixes
Hi,
Is there going to be a release anytime soon to correct the indicators disappearing when a time frame is changed on a chart ? I reported it last month and was told it would be fixed in the next release but I did not get a time frame.
Thanks
Is there going to be a release anytime soon to correct the indicators disappearing when a time frame is changed on a chart ? I reported it last month and was told it would be fixed in the next release but I did not get a time frame.
Thanks
- 08 Oct 2009
- Forum: MultiCharts
- Topic: Latest Release Lag
- Replies: 0
- Views: 915
Latest Release Lag
Hi, I am seeing serious lag in updating charts with the latest release version. I watch 3 different chart programs at the same time fed from Zenfire so I know the issue is contained to MC. I am monitoring 1M ES chart and vol charts on all 3 programs. Someone might want to look into this further. Tha...
- 23 Sep 2009
- Forum: MultiCharts
- Topic: Indicator Disappears
- Replies: 2
- Views: 1436
Indicator Disappears
Hi,
I downloaded and installed the latest release. When I change a frame time on a contract chart all of my indicators go blank. I have to turn the status to off then back on again each time to get them back. Any idea why this happens ?
Thanks
I downloaded and installed the latest release. When I change a frame time on a contract chart all of my indicators go blank. I have to turn the status to off then back on again each time to get them back. Any idea why this happens ?
Thanks
- 07 Aug 2009
- Forum: MultiCharts
- Topic: Email Alert Suggestion
- Replies: 1
- Views: 1113
Email Alert Suggestion
Hi, I would like to ask if it is possible to have different email lists on different indicators. So far I have not been able to figure out a way to do this. If it is not possible then I would like to request it if possible. A lot of times I want to get email alerts from different indicators to diffe...
- 25 Jun 2009
- Forum: MultiCharts
- Topic: Still Waiting for help
- Replies: 5
- Views: 2186
- 25 Jun 2009
- Forum: MultiCharts
- Topic: Still Waiting for help
- Replies: 5
- Views: 2186
- 25 Jun 2009
- Forum: MultiCharts
- Topic: Still Waiting for help
- Replies: 5
- Views: 2186
- 23 Jun 2009
- Forum: MultiCharts
- Topic: Still Waiting for help
- Replies: 5
- Views: 2186
Still Waiting for help
Hi,
I am still waiting on an answer for why the latest release crashes on email alerts. I posted a error pic and orignal message back around the 1st of June. Are we not supporting the latest release ???
Thanks
I am still waiting on an answer for why the latest release crashes on email alerts. I posted a error pic and orignal message back around the 1st of June. Are we not supporting the latest release ???
Thanks
- 16 Jun 2009
- Forum: MultiCharts
- Topic: support ????
- Replies: 0
- Views: 1062
support ????
Hi,
I posted a error I am getting with the latest release on email alerts back on June 5th. Could someone please take a look ? There has been no response
Thanks
I posted a error I am getting with the latest release on email alerts back on June 5th. Could someone please take a look ? There has been no response
Thanks
- 05 Jun 2009
- Forum: MultiCharts
- Topic: Latest Release
- Replies: 0
- Views: 1290
Latest Release
Hi,
Since I upgraded to the latest release I am getting the email error when my system tries to send a email alert. I did not have this issue with the last beta. Please advise
Thanks
Since I upgraded to the latest release I am getting the email error when my system tries to send a email alert. I did not have this issue with the last beta. Please advise
Thanks
- 13 May 2009
- Forum: MultiCharts
- Topic: DollarTrailing Question
- Replies: 5
- Views: 2428
- 12 May 2009
- Forum: MultiCharts
- Topic: DollarTrailing Question
- Replies: 5
- Views: 2428
Hi TJ, Thanks for the reply. I understand that bigpointvalue returns 50 for ES. I am assuming dollar trail looks at openpositionprofit maybe ? My goal was to trail when I got 3 points plus on a trade. I really wish we could tell a strategy to use the run-up value and exit if profit was > X, but I ne...
- 12 May 2009
- Forum: MultiCharts
- Topic: DollarTrailing Question
- Replies: 5
- Views: 2428
DollarTrailing Question
Hi, I am testing Dollar Trailing and have mine set at (3*BigPointValue) which is 3 points on the ES. Attached is a snap shot showing the strategy entry and ES almost 5 points away from the entry yet the auto trailing does not show. How exactly does this command lock in a trail profit ? Thanks Here i...
- 05 May 2009
- Forum: MultiCharts
- Topic: RUN-UP Access
- Replies: 0
- Views: 1132
RUN-UP Access
Hi, I would like to see if I can request access to the run-up variable in a strategy to use it as a trigger. Playing with different trading systems I consistently see cases where the run-up value showed a profit and yet the strategy stops out with a loss. If we can not have access to it then why eve...
- 30 Mar 2009
- Forum: MultiCharts
- Topic: Zenfire feed
- Replies: 5
- Views: 2987
- 30 Mar 2009
- Forum: MultiCharts
- Topic: Zenfire feed
- Replies: 5
- Views: 2987
Hi, Thanks for all the help. I did indeed think to export the historical data this weekend into QM and got the ESM9 symbol connected and updating ticks, but on the chart it will not show new data unless I do a CTRL-R. Any ideas why live new data will not show up even though the tick is received in Q...
- 29 Mar 2009
- Forum: MultiCharts
- Topic: Zenfire feed
- Replies: 5
- Views: 2987
- 27 Mar 2009
- Forum: MultiCharts
- Topic: Zenfire feed
- Replies: 5
- Views: 2987
Zenfire feed
Hi,
If someone is using Zenfire for the futures could you post what the symbol is for the futs below and what exchange they are on
Thanks
SP 500 EMINI ES
NQ
YM
If someone is using Zenfire for the futures could you post what the symbol is for the futs below and what exchange they are on
Thanks
SP 500 EMINI ES
NQ
YM
- 24 Mar 2009
- Forum: MultiCharts
- Topic: Interval/Time
- Replies: 2
- Views: 1417
- 24 Mar 2009
- Forum: MultiCharts
- Topic: Zenfire
- Replies: 3
- Views: 1890
- 22 Mar 2009
- Forum: MultiCharts
- Topic: MarketPosition Is Screwy
- Replies: 12
- Views: 6283
Hi Super, Thanks a bunch for taking the time to try and explain this to me. I read thruough it a couple times and although I am not sure I understand it all I think I have a idea how to test and find what I am trying to determine. The eld you attached seems to be gone now so I hope MC did not remove...
- 21 Mar 2009
- Forum: MultiCharts
- Topic: Zenfire
- Replies: 3
- Views: 1890
Zenfire
Hi,
Can someone explain to me how to add a symbol ti chart from Zenfire. I added my login info to the quote manager, but when I try to add a symbol it does not show up in the list of data providers.
Thanks
Can someone explain to me how to add a symbol ti chart from Zenfire. I added my login info to the quote manager, but when I try to add a symbol it does not show up in the list of data providers.
Thanks
- 18 Mar 2009
- Forum: MultiCharts
- Topic: Interval/Time
- Replies: 2
- Views: 1417
Interval/Time
Hi,
How do I change a time interval on a chart in the symbol/interval box on a chart
I have tried /ESM9-510 for a volume chart of 510 bars, but nothing I tried works
Thanks
How do I change a time interval on a chart in the symbol/interval box on a chart
I have tried /ESM9-510 for a volume chart of 510 bars, but nothing I tried works
Thanks
- 17 Mar 2009
- Forum: MultiCharts
- Topic: Opentick is Gone :(
- Replies: 0
- Views: 1282
Opentick is Gone :(
After this latest beta I was thrilled that the data feed for opentick was streamlined and super fast loading data. Now it seems my feed from Opentick is taost at the end of March. Man I can not catch a break
Bummer
Bummer
- 14 Mar 2009
- Forum: MultiCharts
- Topic: MarketPosition Is Screwy
- Replies: 12
- Views: 6283
That would be Awesome Andrew. Thanks for the update Could someone explain exactly what and how Intra Bar Order Generation is suppose to do. I still have not seen it work as expected yet. If I watch the profit amount in my live simulation account when a profit amount reaches where I have exits set th...
- 13 Mar 2009
- Forum: MultiCharts
- Topic: MarketPosition Is Screwy
- Replies: 12
- Views: 6283
- 12 Mar 2009
- Forum: MultiCharts
- Topic: MarketPosition Is Screwy
- Replies: 12
- Views: 6283
MarketPosition Is Screwy
Hi, I have a current strategt that gets the current MarketPosition and stores the results in a variable called MP. When I load a strategy I am working on I shows I am currently Long 1 contract yet my sim account is flat and holds no positions. How can this be ? I also tried turning on the auto trade...
- 12 Mar 2009
- Forum: MultiCharts
- Topic: Auto trading Question
- Replies: 3
- Views: 1544
Hi Super, My exit is done thru using the 3rd party DLL from TWSLINK which allows a immediate exit from a strategy and does not have to wait for a bar to close or the open of the next bar. That is the issue I am trying to work around. When my condition fires I want to exit immediately at market, and ...
- 12 Mar 2009
- Forum: MultiCharts
- Topic: Auto trading Question
- Replies: 3
- Views: 1544
Auto trading Question
Hi, After many many hours of testing and debugging a auto trading monky I am working on I have noticed that if I exit a position the strategy initially entered for me it does not seem to see that the MarketPosition is now flat and attempts to close it when a trigger comes. Is there a way to force th...
- 12 Mar 2009
- Forum: MultiCharts
- Topic: Run Up Value
- Replies: 1
- Views: 1055
Run Up Value
Hi,
Is there a way to access the Run-Up Value I see when I back test a strategy. I looked in the help manual but did not see any reference to it.
Thanks
Is there a way to access the Run-Up Value I see when I back test a strategy. I looked in the help manual but did not see any reference to it.
Thanks
- 06 Mar 2009
- Forum: MultiCharts
- Topic: AUto Trading Misleading ???
- Replies: 5
- Views: 2394
AUto Trading Misleading ???
Hi All, After getting the Auto Trader to work with the latest beta I have run it for a couple days and have noticed that when I back test my strategy I get excellent results as I expect from my Algorithm. When I run it live on a IB Simulation Account however I notice that when my Algorithm detects a...
- 05 Mar 2009
- Forum: MultiCharts
- Topic: Auto Error Still
- Replies: 6
- Views: 2054
- 05 Mar 2009
- Forum: MultiCharts
- Topic: Auto Error Still
- Replies: 6
- Views: 2054
Hi, Here is a capture of the screen when a order tried to fire on a strategy. I noticed it is tryin to fill on the Opentick Symbol and not nthe IB symbol. Is there something in my config I posted earlier that is not set right ? Like I said it worked with the last beta I was using from November I thi...
- 05 Mar 2009
- Forum: MultiCharts
- Topic: Auto Error Still
- Replies: 6
- Views: 2054
Hi Super, Thanks for confirming it works for you. I suspect it may be due to the fact I am using Opentick as my chart and IB as my trade symbol, but I will double check my settings. It use to work on the previous beta. Attached is a snap pic of my settings so someone from MC can confirm they look ri...
- 04 Mar 2009
- Forum: MultiCharts
- Topic: Auto Error Still
- Replies: 6
- Views: 2054
Auto Error Still
Hi.
I am still getting a message from IB on the new beta when I try to engage the auto trading which says no security defined for request. I have double checked and I have the symbol setup correctly, and it use to work in beta 2
Is anyine trading the ES symbol from IB in the latest beta ?
Thanks
I am still getting a message from IB on the new beta when I try to engage the auto trading which says no security defined for request. I have double checked and I have the symbol setup correctly, and it use to work in beta 2
Is anyine trading the ES symbol from IB in the latest beta ?
Thanks
- 03 Mar 2009
- Forum: MultiCharts
- Topic: Get Tick Value From IB
- Replies: 3
- Views: 1455
Hi TJ, In IB you can enter a symbol TICK_NYSE which is the overall tick movement index of the NYSE I want to be able to look at it in a indicator to base decisions on whether it is positive or negative I just can not figure out how to get access to the symbol value in the Easy language. CurrentAsk a...
- 03 Mar 2009
- Forum: MultiCharts
- Topic: Get Tick Value From IB
- Replies: 3
- Views: 1455
Get Tick Value From IB
Hi,
DOes anyone know of a way to get the tick value back from IB and print it RealTime in a indicator ?
Thanks
DOes anyone know of a way to get the tick value back from IB and print it RealTime in a indicator ?
Thanks
- 02 Mar 2009
- Forum: MultiCharts
- Topic: New beta
- Replies: 7
- Views: 2718
New beta
Hi, I am seeing an issue again with the auto trading interface to IB and was wondering if it is just me or if there is a real problem. The latest beta gives me a error when I try to auto trade the ES symbol in IB using /ESH9 from an opentick feed. I set the Underlying to ES and exchange to GLOBEX as...
- 25 Feb 2009
- Forum: MultiCharts
- Topic: Dollar Trailing
- Replies: 2
- Views: 1855
- 23 Feb 2009
- Forum: MultiCharts
- Topic: Dollar Trailing
- Replies: 2
- Views: 1855
Dollar Trailing
Hi, I am having a issue with the auto trail command listed below. I asked a question the other day about it but never got an answer so I decided to try again. When the code listed below triggers I am seeing the Auto trader try to exit the position as expected, but it tries as much as currentask +1 s...
- 19 Feb 2009
- Forum: MultiCharts
- Topic: trailing stop
- Replies: 0
- Views: 1438
trailing stop
Hi, I finally got my strategy trailing, but I noticed that when it tried to lock in a trailing stop after it is + on a trade it cancels the target and stop first then sends limit orders until it gets filled. Is there any way to get a trailing stop to use a market order instead ? When it cancels the ...
- 18 Feb 2009
- Forum: MultiCharts
- Topic: OpenPositionProfit
- Replies: 2
- Views: 1239
- 17 Feb 2009
- Forum: MultiCharts
- Topic: OpenPositionProfit
- Replies: 2
- Views: 1239
OpenPositionProfit
Hi, I ahve a question. I am trying to determine if the OpenPositionProfit value for any symbol is in price/tick or actual dollar amount. I ran some test on the ES symbol with IB and saw that when my IB sim account $ amount was > than my trigger the order to exit was not sent. Any help or thoughts wo...
- 15 Feb 2009
- Forum: MultiCharts
- Topic: Plot Arrows ?
- Replies: 4
- Views: 3105
Plot Arrows ?
Hi,
Is there a way to plot a UP or DN arrow from a condition on a chart when it happens ?
Thanks
Is there a way to plot a UP or DN arrow from a condition on a chart when it happens ?
Thanks
- 10 Feb 2009
- Forum: MultiCharts
- Topic: Strategy Question
- Replies: 1
- Views: 1885
Strategy Question
Hi,
Is there a way in a strategy to buy or sell a bar out past the next bar. I would like to place the order 2-3 bars after a signal fires
Thanks
Is there a way in a strategy to buy or sell a bar out past the next bar. I would like to place the order 2-3 bars after a signal fires
Thanks
- 03 Feb 2009
- Forum: MultiCharts
- Topic: Email setup
- Replies: 0
- Views: 1280
Email setup
Hi,
I have noticed that the email alert list is connected to all charts regardless of which workspace they are in. Is there a way to have individual email recipents on each chart that are different ?
Thanks
I have noticed that the email alert list is connected to all charts regardless of which workspace they are in. Is there a way to have individual email recipents on each chart that are different ?
Thanks
- 22 Jan 2009
- Forum: MultiCharts
- Topic: Auto Trade With Opentick SYmbol and IB Account
- Replies: 3
- Views: 1541
- 21 Jan 2009
- Forum: MultiCharts
- Topic: Auto Trade With Opentick SYmbol and IB Account
- Replies: 3
- Views: 1541
Auto Trade With Opentick SYmbol and IB Account
Hi, I have been tryin to figure this out for a few weeks and still do not see how it is possible to do. I have a chart which is fed from Opentick, and I want to run a strategy on the chart and have it send orders to IB. I asked about this a few weeks ago and did not really get a definitive answer. I...
- 11 Jan 2009
- Forum: MultiCharts
- Topic: Optimization Question
- Replies: 2
- Views: 1391
Optimization Question
Hi, I ran into a issue with the Optimizer on a strategy I am working on, and was wondering if anyone had a better work around. I set two variables as inputs one being the maxgain which is a positive number, and maxloss as a negative number. When I try to change the start value of this variable I get...
- 17 Dec 2008
- Forum: MultiCharts
- Topic: Auto Trading Question About Limit Orders
- Replies: 3
- Views: 1967
Hi, The buy currentask - .0004 tells the strategy to try and get a fill Long at the currentask - .0004. The strategy then sends a limit buy order to IB. The issue I have is the limit buy is pulled on the next tick, and another limit order is fired again at the new currentask - .0004. I was wondering...
- 17 Dec 2008
- Forum: MultiCharts
- Topic: How To Auto Trade IB off Opentick Chart
- Replies: 8
- Views: 3484
Hi, Here is the original post I made on trying to figure out how to detect signals off the Opentick chart and have it send a order to IB. I tried what marina posted, but still get the #55 error from MC stating a invalid symbol name. Thanks for the help. http://forum.tssupport.com/viewtopic.php?t=580...
- 16 Dec 2008
- Forum: MultiCharts
- Topic: Auto Trading Question About Limit Orders
- Replies: 3
- Views: 1967
Auto Trading Question About Limit Orders
Hi, I am trying to figure out if there is a way to tell the strategy engine to let a Limit order stay active for longer than a few seconds. It seems when I send a Limit order like the one shown below it lets the order hang for a few seconds then cancels it and tries again as the tick price moves. Is...
- 16 Dec 2008
- Forum: MultiCharts
- Topic: How To Auto Trade IB off Opentick Chart
- Replies: 8
- Views: 3484
Still Waiting
I am still waiting for help with how to trade a IB symbol off a strategy trigger on a Opentick chart.
Thanks
Thanks
- 11 Dec 2008
- Forum: MultiCharts
- Topic: Auto Strategy Question
- Replies: 1
- Views: 1453
Auto Strategy Question
Hi,
Is there a way to send a cancel on open stops that may be active on a symbol at IB. The reason I want to do this is to chase a stop under a rising profitable trade quickly. Any thoughts or ideas would be greatly appreciated.
Thanks
Is there a way to send a cancel on open stops that may be active on a symbol at IB. The reason I want to do this is to chase a stop under a rising profitable trade quickly. Any thoughts or ideas would be greatly appreciated.
Thanks
- 11 Dec 2008
- Forum: MultiCharts
- Topic: Some features I wish to have before Gold release
- Replies: 23
- Views: 9228
Hi, So what you guys are telling me is the lifetime updates are bogus now. If that is the case shame on MC. My Daddy always told me to remember two things in life and you can never go wrong. 1 Always tell the truth no matter what. You then only have to remember one story 2 Always keep your word to s...
- 10 Dec 2008
- Forum: MultiCharts
- Topic: Issue with OpenPositionProfit
- Replies: 3
- Views: 1611
- 10 Dec 2008
- Forum: MultiCharts
- Topic: Issue with OpenPositionProfit
- Replies: 3
- Views: 1611
- 10 Dec 2008
- Forum: MultiCharts
- Topic: Issue with OpenPositionProfit
- Replies: 3
- Views: 1611
Issue with OpenPositionProfit
Hi, I tried to use the OpenPositionProtect strategy word to stop out of a Long position if the amount went > -80. It went right through -80 and kept falling. Does the language word understand a negative number ? thanks If MarketPosition= 1 and OpenPositionProfit < -80 then begin Buy ("SStopProtect")...
- 10 Dec 2008
- Forum: MultiCharts
- Topic: How To Auto Trade IB off Opentick Chart
- Replies: 8
- Views: 3484
I am still trying to figure out how to run a strategy on a symbol from Opentick and trade the IB symbol when the trigger fires.
Thanks
http://forum.tssupport.com/viewtopic.ph ... homas+mann
Thanks
http://forum.tssupport.com/viewtopic.ph ... homas+mann
- 10 Dec 2008
- Forum: MultiCharts
- Topic: How To Auto Trade IB off Opentick Chart
- Replies: 8
- Views: 3484
- 09 Dec 2008
- Forum: MultiCharts
- Topic: strategy command question
- Replies: 2
- Views: 1625
strategy command question
Hi,
Could someone explain how the two auto trading commands work listed below. I tried to use them but did not see the trigger or stop hit at the price I specified when it should have.
Thanks
SetProfitTarget(50);
SetStopLoss(75);
Could someone explain how the two auto trading commands work listed below. I tried to use them but did not see the trigger or stop hit at the price I specified when it should have.
Thanks
SetProfitTarget(50);
SetStopLoss(75);
- 09 Dec 2008
- Forum: MultiCharts
- Topic: Global Variable ??
- Replies: 3
- Views: 1866
- 09 Dec 2008
- Forum: MultiCharts
- Topic: MarketPosition on Multiple Symbols ?
- Replies: 3
- Views: 1412
- 09 Dec 2008
- Forum: MultiCharts
- Topic: MarketPosition on Multiple Symbols ?
- Replies: 3
- Views: 1412
MarketPosition on Multiple Symbols ?
Hi, I have been running some test and discovered that if I have two different stratiges running on two different symbols when one or the other is activated it does not allow the other trigger to execute. Does MarketPosition means the status from any symbol from IB ? Is there a way to get a market po...
- 09 Dec 2008
- Forum: MultiCharts
- Topic: Global Variable ??
- Replies: 3
- Views: 1866
Global Variable ??
Hi,
I was wondering if someone could show me a way to create a variable in a signal or indicator and have it load initially the first time then maintain that value until it is changed within the script and not on every bar close.
Thanks
I was wondering if someone could show me a way to create a variable in a signal or indicator and have it load initially the first time then maintain that value until it is changed within the script and not on every bar close.
Thanks
- 07 Dec 2008
- Forum: MultiCharts
- Topic: How To Auto Trade IB off Opentick Chart
- Replies: 8
- Views: 3484
How To Auto Trade IB off Opentick Chart
Hi, I am still trying to resolve how to use a Opentick tick chart to generate orders to IB. I posted a reply in the other thread I started the other day but got no answer. Has anyone else used a alternate tick feed to generate orders to IB ? I have verified the symbol in the dictionary is IB, but I ...
- 06 Dec 2008
- Forum: MultiCharts
- Topic: Some features I wish to have before Gold release
- Replies: 23
- Views: 9228
COnfused
Hi All,
I am a bit confused as to what the GOLD release is all about. I purchased MC way back in the beginning. When I purchased it I was told in a email that I would receive lifetime updates for free. Has that changed somewhere along the way ?
Thanks
I am a bit confused as to what the GOLD release is all about. I purchased MC way back in the beginning. When I purchased it I was told in a email that I would receive lifetime updates for free. Has that changed somewhere along the way ?
Thanks
- 05 Dec 2008
- Forum: MultiCharts
- Topic: marketposition question
- Replies: 6
- Views: 1867
Auto stop trail
Hi,
Does anyone have a example of auto chasing a stop on orders once they are going in the right way ?
Thanks
Does anyone have a example of auto chasing a stop on orders once they are going in the right way ?
Thanks
- 04 Dec 2008
- Forum: MultiCharts
- Topic: marketposition question
- Replies: 6
- Views: 1867
- 04 Dec 2008
- Forum: MultiCharts
- Topic: marketposition question
- Replies: 6
- Views: 1867
Thanks Super That part works, but what I am tryin to achieve is to cover a position if I am not flat then reverse so effectively if I was Long I would sell 2 contracts which would make reverse with 1 contract Short. If I was short I would buy 2 contracts. I tried using the contracts word and a few o...
- 04 Dec 2008
- Forum: MultiCharts
- Topic: Auto trader
- Replies: 5
- Views: 3153
Hi Marina, I tried the example you gave me with the same results. I have a chart with the symbol /YMZ8 on it from opentick with the EC exchange. It plots just fine so the chart is working. I added in my signal script and under auto trading, IB settings, I added the IB symbol as the only symbol in th...
- 04 Dec 2008
- Forum: MultiCharts
- Topic: marketposition question
- Replies: 6
- Views: 1867
marketposition question
Hi, Could someone please show me a easy way to use marketposition to initially get into a trade on either side, then use the marketposition to cover the last trade and flip on the opposite signal. I have tried everything I could find in the forums and think of yet my script always leaves me flat.. T...
- 04 Dec 2008
- Forum: MultiCharts
- Topic: Auto trader
- Replies: 5
- Views: 3153
- 03 Dec 2008
- Forum: MultiCharts
- Topic: Auto trader
- Replies: 5
- Views: 3153
Hi, I think I know why I am getting this error. It seems that if you use Opentick as your feed for the algorithm and trigger points you can not then send a order to IB since the symbol at IB is different from Opentick. The reason I want to use Opentick as the trigger is because IB does not do true t...
- 03 Dec 2008
- Forum: MultiCharts
- Topic: BUG: V5 Beta2 skips displaying chart
- Replies: 3
- Views: 1718
- 02 Dec 2008
- Forum: MultiCharts
- Topic: Auto trader
- Replies: 5
- Views: 3153
Auto trader
Hi,
I am playing with the auto trader again on the sim account from IB. When I setup my strategy and then turn on the auto trader I get a error that I have a invalid value in field # 55. I have a symbol defined in the symbol tab so I am a bit confused. Any ideas ?
Thanks
I am playing with the auto trader again on the sim account from IB. When I setup my strategy and then turn on the auto trader I get a error that I have a invalid value in field # 55. I have a symbol defined in the symbol tab so I am a bit confused. Any ideas ?
Thanks
- 18 Nov 2008
- Forum: MultiCharts
- Topic: OPENTICK FEED
- Replies: 5
- Views: 2248
- 17 Nov 2008
- Forum: MultiCharts
- Topic: Feed Question/Issue
- Replies: 0
- Views: 1312
Feed Question/Issue
Hi,
I have noticed that using both IB and Opentick as feeds that when the IB feed starts requesting data and hits the pacing violation wall it slows the Opentick feed down and sometimes blocks it. Are the two seperate pipes in the request channel ? They seem to be in series and not parallel.
Thanks
I have noticed that using both IB and Opentick as feeds that when the IB feed starts requesting data and hits the pacing violation wall it slows the Opentick feed down and sometimes blocks it. Are the two seperate pipes in the request channel ? They seem to be in series and not parallel.
Thanks
- 17 Nov 2008
- Forum: MultiCharts
- Topic: OPENTICK FEED
- Replies: 5
- Views: 2248
Opentick
Hi,
Which exchange do you have to have for the #EM ? I use the EM exchange and the EC
Thanks
Which exchange do you have to have for the #EM ? I use the EM exchange and the EC
Thanks
- 16 Nov 2008
- Forum: MultiCharts
- Topic: OPENTICK FEED
- Replies: 5
- Views: 2248
OPENTICK FEED
Hi, I wanted to see if anyone else here is using Opentick as a feed. I would like to compare some issues I have seen to try and help MC and opentick fix them. Please PM me if you have time. Listed below are some issues I have seem. Thanks 1 When Markets get busy I have seen a lag in the feed for up ...
- 16 Nov 2008
- Forum: MultiCharts
- Topic: MULTICHARTS 5.0 BETA 1 NOW AVAILABLE
- Replies: 26
- Views: 10428
Hi Marina, Sorry I did not get back to you sooner, I have been out. Here is the answers to the questions about V5 Beta 201 I do run a detached chart on the tick symbol from IB I am NOT using auto trading at all The going to sleep issue I saw with beta 201 seems to happen if I leave it mininized for ...
- 09 Nov 2008
- Forum: MultiCharts
- Topic: MULTICHARTS 5.0 BETA 1 NOW AVAILABLE
- Replies: 26
- Views: 10428
lockup
Hi,
My computer is not going into sleep mode. I am sitting at it all day working on other stuff with MC minimized. I have run MC this way for the past 2 years, and watch for alerts to popup on indicators while I work. This appeared in the latest beta
Thanks
My computer is not going into sleep mode. I am sitting at it all day working on other stuff with MC minimized. I have run MC this way for the past 2 years, and watch for alerts to popup on indicators while I work. This appeared in the latest beta
Thanks
- 09 Nov 2008
- Forum: MultiCharts
- Topic: MULTICHARTS 5.0 BETA 1 NOW AVAILABLE
- Replies: 26
- Views: 10428
Lockup Issue
Hi All, I just wanted to report a issue I have seen with the latest beta and see if anyone else has seen it. When I minimize the MC program and try to bring it back up after a while it seems to be locked up. By lockup I mean the screen is all gray where the charts would normally be and the cursor is...
- 24 Sep 2008
- Forum: MultiCharts
- Topic: TFZ8 issue with MC
- Replies: 7
- Views: 3078
Support ???
Can Someone from TSSUPPORT please look into this issue and offer a suggestion as to how to fix it please ???
Thanks
Thanks
- 22 Sep 2008
- Forum: MultiCharts
- Topic: TFZ8 issue with MC
- Replies: 7
- Views: 3078
TFZ8 issue with MC
Hi, I had posted a couple questions in this topic below in reference to someone else also asking same question. It seems the latest Beta MC will receive quotes from IB on the new RUT symbol (TFZ8), but when I try to chart it I get a symbol not found issue. I would like to know how to resolve this. T...
- 19 Sep 2008
- Forum: MultiCharts
- Topic: TFZ8 - New Russell Mini contract on ICE
- Replies: 5
- Views: 2272
- 19 Sep 2008
- Forum: MultiCharts
- Topic: TFZ8 - New Russell Mini contract on ICE
- Replies: 5
- Views: 2272
- 31 Jul 2008
- Forum: MultiCharts
- Topic: Opentick Issue
- Replies: 4
- Views: 1848
Hi Marina, I have ran NT all week to give it a fair comparison. I use Ultra VNC to log into my server remotely and watch NT thru the VNC. It has run 24/7 for the last 5 days and I loaded 2000 tick bars worth of data. To initially load a chart in the beginning it took 4-5 mins for 2000 tick bars. To ...
- 27 Jul 2008
- Forum: MultiCharts
- Topic: New beta is a BW pig
- Replies: 6
- Views: 3005
It Has Been Fun
Hi Marina, All I did was uninstall the last version and install the beta. I then was notified by my IT person that your program was drawing consistently 50% of our total BW here where I am at during the day. I downloaded the DU meter program, and also verified it was the MC which was doing it since ...
- 25 Jul 2008
- Forum: MultiCharts
- Topic: Opentick with new beta
- Replies: 3
- Views: 1483
- 25 Jul 2008
- Forum: MultiCharts
- Topic: Opentick Issue
- Replies: 4
- Views: 1848
Opentick Issue
Hi Marina, /YMU8 /ER2U8 /NQU8 /ESU8 /E7U8 I am loading 2000 tick bars on various times, but I load only 2 charts per symbol per Workspace. If I miss a day or two of data then it can take hours to load the charts. This same task with NT Trader only takes maybe 5-6 mins to load 2000 tick bars. May I s...
- 24 Jul 2008
- Forum: MultiCharts
- Topic: New beta is a BW pig
- Replies: 6
- Views: 3005
New beta is a BW pig
Hi All,
After playing today with the new MC I noticed that my Bandwidth usage really spiked up. What was changed that requires so much BW now compared to previous versions ?
After playing today with the new MC I noticed that my Bandwidth usage really spiked up. What was changed that requires so much BW now compared to previous versions ?
- 24 Jul 2008
- Forum: MultiCharts
- Topic: Opentick with new beta
- Replies: 3
- Views: 1483
Opentick with new beta
Hi, I have loaded the new beta and I still see slow data loading from opentick with a subscription to the futures symbols. I can load the same symbols with NT trader gathering 2000 tick bars in a couple mins. I have tried this on several machines and it seems to be consistent with MC. Is anyone else...
- 16 Jul 2008
- Forum: MultiCharts
- Topic: Datafeed Issues
- Replies: 12
- Views: 4172
- 15 Jul 2008
- Forum: MultiCharts
- Topic: Datafeed Issues
- Replies: 12
- Views: 4172
- 11 Jul 2008
- Forum: MultiCharts
- Topic: Datafeed Issues
- Replies: 12
- Views: 4172
Hi marina, I am aware if MC shuts down improperly it will have issues, but I can not get the interface to work now even after I uninstall the latest and re-install it from scratch. I starting having issues with my opentick interface after windows updated a security patch on tuesday. I suspect this i...
- 11 Jul 2008
- Forum: MultiCharts
- Topic: Datafeed Issues
- Replies: 12
- Views: 4172
Datafeed Issues
Hi All, I am trying to determine why I am seeing a issue with my latest release on MC. This morning I decided to shut down my charts and reboot my PC as I usually do every day. All my charts were displaying data just fine. When I rebooted and re-opened my charts I now get a blank screen and am waiti...
- 05 Jun 2008
- Forum: User Contributed Studies and Indicator Library
- Topic: Heiken Charts
- Replies: 1
- Views: 2532
Heiken Charts
Is there any way to do Heiken candles in MC ?
Thanks
Thanks
- 07 May 2008
- Forum: MultiCharts
- Topic: Opentick Feed Still broke
- Replies: 4
- Views: 2137
- 06 May 2008
- Forum: MultiCharts
- Topic: Opentick Feed Still broke
- Replies: 4
- Views: 2137
Opentick Feed Still broke
Hi
I am still trying to determine what is causing this issue with getting history data from the opentick server. Please have someone contact me about it.
Thanks
I am still trying to determine what is causing this issue with getting history data from the opentick server. Please have someone contact me about it.
Thanks
- 03 May 2008
- Forum: MultiCharts
- Topic: Opentick Issues Still
- Replies: 3
- Views: 1627
Hi Marina, The logs are sent as well as a chart showing the spike bar. Attached is the pic of the spike bar I sent with the logs. Again I will emphasize that when I request number of bars instead of days the interface seems to work with Opentick so I suspect something is different in getting bar dat...
- 02 May 2008
- Forum: MultiCharts
- Topic: Opentick Issues Still
- Replies: 3
- Views: 1627
Opentick Issues Still
Hi Marina, I have been investigating the spike bar issues I experienced with my Opentick feed and the latest release. I have figured out that if I request tick data and specify the number of days I want it causes the spike and compression of data into 1 bar. If I request however a number of bars bac...
- 30 Apr 2008
- Forum: MultiCharts
- Topic: Quote Manager Request
- Replies: 3
- Views: 1539
- 30 Apr 2008
- Forum: MultiCharts
- Topic: Latest Release of MC Hides Indicators
- Replies: 6
- Views: 2158
Latest Release of MC Hides Indicators
Hi,
I am seeing issues with the latest MC where whenI open my charts it does not display indicators unless I click the status off then on again.
Is anyone else seeing this ?
I am seeing issues with the latest MC where whenI open my charts it does not display indicators unless I click the status off then on again.
Is anyone else seeing this ?
- 30 Apr 2008
- Forum: MultiCharts
- Topic: Opentick Question
- Replies: 1
- Views: 1353
Still have Opentick Issues
I really would like to get the Opentick interface issues resolved. Please have someone from support contact me.
Thanks
Thanks
- 29 Apr 2008
- Forum: MultiCharts
- Topic: Quote Manager Request
- Replies: 3
- Views: 1539
Quote Manager Request
Hi,
I would like to suggest that you deactivate all feeds as a default. It is a pain turning off all of the feeds I do not need. I think others as well only use 1-2 feeds.
Thanks
I would like to suggest that you deactivate all feeds as a default. It is a pain turning off all of the feeds I do not need. I think others as well only use 1-2 feeds.
Thanks
- 29 Apr 2008
- Forum: MultiCharts
- Topic: Opentick Question
- Replies: 1
- Views: 1353
Opentick Question
Hi Support, Attached is a pic showing my /ESM8 symbol from opentick is connected to the stream just like the /ER2M8 and others are. I had a issue earlier where MC disappeared again, and when I rebooted my /ESM8 symbol will connect, but no tick data is coming in. I also logged into the quote board to...
- 28 Apr 2008
- Forum: MultiCharts
- Topic: Fianl release has some issues
- Replies: 3
- Views: 1777
- 28 Apr 2008
- Forum: MultiCharts
- Topic: Fianl release has some issues
- Replies: 3
- Views: 1777
Fianl release has some issues
Hi,
I am still having issues with MC suddenly shutting down by itself. I would like to know if this issue has been or is going to be looked into. I did not see this in beta3 so I suspect it is a result of some changes in between, but I have no real way to tell.
Thanks
I am still having issues with MC suddenly shutting down by itself. I would like to know if this issue has been or is going to be looked into. I did not see this in beta3 so I suspect it is a result of some changes in between, but I have no real way to tell.
Thanks
- 25 Apr 2008
- Forum: MultiCharts
- Topic: Open E Cry
- Replies: 0
- Views: 1208
Open E Cry
Hi,
Is anyone using Open E Cry as a broker and also a data feed for MC ?
Any feedback as to how stable it is would be appreciated. I need a backup account.
Thanks
Is anyone using Open E Cry as a broker and also a data feed for MC ?
Any feedback as to how stable it is would be appreciated. I need a backup account.
Thanks
- 25 Apr 2008
- Forum: MultiCharts
- Topic: Chart Price Issue
- Replies: 7
- Views: 2475
Hi, Just to let everyone know I had to uninstall MC completely and yes I did check the box to remove all. I also had to go into the programfiles folder and remove the tssupport folder completely. Until I did that I could not get my price scale to work with auto selection again. I guess the check box...
- 24 Apr 2008
- Forum: MultiCharts
- Topic: Chart Price Issue
- Replies: 7
- Views: 2475
Hi, I have tried to manually set the price scale and it does the same thing. I have never seen this happen before in all the years I have used MC. I guess it is time to roll back to the last beta. I also have noted that when I open my charts each day I must turn off and back on each indicator on a c...
- 23 Apr 2008
- Forum: MultiCharts
- Topic: MC 3 Final Question
- Replies: 4
- Views: 2405
- 23 Apr 2008
- Forum: MultiCharts
- Topic: Latest release Still has Opentick issues
- Replies: 0
- Views: 1285
Latest release Still has Opentick issues
Hi, I have attached a pic of a issue I have seen with using Opentick for over a year now. I would really like to see it get investigated and fixed. If for some reason MC crashes while running the database in Qm gets corrupted I think. When I shut down all running task and reload the MC program it co...
- 22 Apr 2008
- Forum: MultiCharts
- Topic: Chart Price Issue
- Replies: 7
- Views: 2475
- 22 Apr 2008
- Forum: MultiCharts
- Topic: Chart Price Issue
- Replies: 7
- Views: 2475
Chart Price Issue
Hi,
I am having a issue where my data is rounded off on my chart to a whole number and does not use the 2 decimal place. How do I change it back on a chart ?
Thanks
I am having a issue where my data is rounded off on my chart to a whole number and does not use the 2 decimal place. How do I change it back on a chart ?
Thanks
- 22 Apr 2008
- Forum: MultiCharts
- Topic: MC 3 Final Question
- Replies: 4
- Views: 2405
MC 3 Final Question
Hi, I am experiencing error messages in QM with the final MC3 in which it complains of ESignal not connected. I have the ESignal DLL deactivated so my question is why ESignal is trying to load. I fear this slows down the data interface and makes things worse. Anyone have a clue ? Thanks The error is...
- 21 Apr 2008
- Forum: MultiCharts
- Topic: Auto Trader
- Replies: 1
- Views: 1140
Auto Trader
Hi all
Is there a example on using the auto trader built in, and does it trigger now in intrabar ?
Thanks
Is there a example on using the auto trader built in, and does it trigger now in intrabar ?
Thanks
- 21 Apr 2008
- Forum: MultiCharts
- Topic: Sample Autotrading and intrabar strategies that work well
- Replies: 4
- Views: 2205
Auto Trader
Is there any examples available on how to call the auto trader from a indicator available ?
Thanks
Thanks
- 21 Apr 2008
- Forum: MultiCharts
- Topic: Release 3
- Replies: 3
- Views: 1906
Release 3
Hi All,
I am running the release version and still are having issues with MC simply shutting itself down and leaving the studyserver and TsServer running in memory. Is anyone else experiencing this ?
Thanks
I am running the release version and still are having issues with MC simply shutting itself down and leaving the studyserver and TsServer running in memory. Is anyone else experiencing this ?
Thanks
- 18 Apr 2008
- Forum: MultiCharts
- Topic: Beta 3 weirdness
- Replies: 1
- Views: 1254
Beta 3 weirdness
Hi All, Has anyone else experienced MC going away by itself randomly ? I have had it happen 3 times in the last couple days with beta 3. It just disappears and leaves my QM window running. I also have noticed that when I bring up charts the inidcators are not visible unless I change status on each o...
- 16 Apr 2008
- Forum: MultiCharts
- Topic: My obeservations on Ver.3 Beta 3
- Replies: 7
- Views: 3198
alternative to MC Autotrader
I use TWSLINK.DLL which is a free DLL add-on. This allows me to send orders to IB intrabar. It also has some issues but is workable. You can search the net for it and you will find the home page. I can not post links in messages any more.
- 04 Apr 2008
- Forum: MultiCharts
- Topic: New Beta 2
- Replies: 3
- Views: 2266
New Beta 2
Hi, Thanks for fixing all the stuff that was broke in the previous beta, espically the annoying popup of the main program. I wanted to report however that if you open a chart and history data starts to load then you decide to close the chart QM keeps requesting history data and clogging up other cha...
- 19 Mar 2008
- Forum: MultiCharts
- Topic: Open E Cry
- Replies: 1
- Views: 1248
Open E Cry
Hi,
I was wondering if anyone is using Open E Cry as a data feed and how their tick data was. Do they supply real tick data ?
Any input would be appreciated.
Thanks
I was wondering if anyone is using Open E Cry as a data feed and how their tick data was. Do they supply real tick data ?
Any input would be appreciated.
Thanks
- 14 Mar 2008
- Forum: MultiCharts
- Topic: new beta
- Replies: 22
- Views: 7167
new beta
Hi,
When is a new beta due out ?
Also is there a list of known bugs in the latest ?
Thanks
When is a new beta due out ?
Also is there a list of known bugs in the latest ?
Thanks
- 11 Mar 2008
- Forum: MultiCharts
- Topic: Opentick Feed Issue
- Replies: 9
- Views: 3348
Opentick Issue
Hi, Attached is a Workspace that I had trouble getting to load data from Opentick. The funny thing is when I create a new WS and load the same symbol from opentick the data comes in immediately. I think the issues we are seeing has to do with the WS and maybe how it gets corrupted. I hope this helps...
- 10 Mar 2008
- Forum: MultiCharts
- Topic: Quote manager Import Issue
- Replies: 3
- Views: 1535
Hi Andrew, I can not do that during RTH where I am at. I attached pictures to show the error. The ascii import box is minimized at the btm of my Workspace (see Import3.jpg),and will not open up and expand. The only option I guess I have is to roll back to the last stable version and wait for the nex...
- 09 Mar 2008
- Forum: MultiCharts
- Topic: Quote manager Import Issue
- Replies: 3
- Views: 1535
Quote manager Import Issue
Hi, I am having issues with the new beta when trying to import data. When I bring up the Qm by itself and select import I get a box that opens at the btm of my page. I captured a pic of it called Import1.jpg. The Qm then beeps at me when I try to select anything else in it. I never get the option to...
- 06 Mar 2008
- Forum: MultiCharts
- Topic: Opentick Feed Issue
- Replies: 9
- Views: 3348
Hi Andrew, I have been looking at the issues I am having with Opentick and the new Beta. I downloaded another 3rd party program example from their site which loads tick data RT and also lets you request history data. I don't seem to see the slow download times for history. Please let me know if ther...
- 06 Mar 2008
- Forum: MultiCharts
- Topic: Alert Box Is a CPU Hog
- Replies: 1
- Views: 1158
Alert Box Is a CPU Hog
Hi All, I was wondering if anyone else is seeing a freeze in MC when you are messing with the charts and a alert box pops up ? I have noticed it a lot espically if I am changing the chart symbol properties such as loading more days of tick data. If I am in the process of changing the parameters and ...
- 06 Mar 2008
- Forum: MultiCharts
- Topic: Opentick Feed Issue
- Replies: 9
- Views: 3348
Opentick Feed Issue
Hi Andrew, I am still trying to disect the issues I am seeing with the latest beta and Opentick. It seems really unstable to me with getting history data from Opentick, and the old version I was using prior to this beta release was pretty decent. I was wondering if you changed anything with the DLL ...
- 04 Mar 2008
- Forum: MultiCharts
- Topic: Issues with Quote Manager
- Replies: 9
- Views: 3103
- 04 Mar 2008
- Forum: MultiCharts
- Topic: Issues with Quote Manager
- Replies: 9
- Views: 3103
Hi Andrew, I caught the condition yesterday where Opentick stuffs several hours worth of tick data into 1 Bar. I emailed the picture of the chart and logs to your support center and told them to send it to you. Please let me know if this can be fixed since it is annoying and also messes up indicator...
- 04 Mar 2008
- Forum: MultiCharts
- Topic: Range Bars
- Replies: 2
- Views: 1603
- 28 Feb 2008
- Forum: MultiCharts
- Topic: Range Bars
- Replies: 2
- Views: 1603
Range Bars
Hi All,
How do I do Range Bars on a Chart in MC ?
Thanks
How do I do Range Bars on a Chart in MC ?
Thanks
- 26 Feb 2008
- Forum: MultiCharts
- Topic: Quote Manager Issue
- Replies: 2
- Views: 1297
Locked Process ?
Hi, In reference to why QM has to reload data it already has, I also notice that if it is trying to get history tick data from IB it seems to lock out the history feed from opentick. Is the threads sequential in downloading data , and how does QM handle a error from one feed if it gets no response o...
- 26 Feb 2008
- Forum: MultiCharts
- Topic: Annoying Popup window in latest Beta Still happens
- Replies: 9
- Views: 2891
- 25 Feb 2008
- Forum: MultiCharts
- Topic: Quote Manager Issue
- Replies: 2
- Views: 1297
Quote Manager Issue
Hi, I was wondering if someone could explain to me why the quote manager woudl reload data it already has. I shut down Saturday, and all of my charts showed the last bar on Friday's close. I opened the charts up yesterday afternoon and the charts still looked the same. I left MC run till this am. I ...
- 22 Feb 2008
- Forum: MultiCharts
- Topic: Comments from anyone on using OpenTick Data
- Replies: 5
- Views: 2645
Hi All, I personally am subscribed to the Globex and EMINI packages for Opentick. I find the feed very reliable and until recently I had not had many issues. They use to lag 2-3 seconds when markets got really fast, but lately their new servers seem to be doing better. Overall I think it is worth th...
- 21 Feb 2008
- Forum: MultiCharts
- Topic: Annoying Popup window in latest Beta Still happens
- Replies: 9
- Views: 2891
Hi Andrew, I got to thinking about it and I bet it is my custom indicators that trigger the popup I am seeing. Listed below is a alert message I have coded in my custom script. I can not post all of it, but I bet it is the alert word usage that is causing this. You can add in a alert message to any ...
- 21 Feb 2008
- Forum: MultiCharts
- Topic: Annoying Popup window in latest Beta Still happens
- Replies: 9
- Views: 2891
Hi Andrew, Attached is a tick countdown timer I use which I have alerts enabled. Listed below are the specific options I have checked. This indicator will bring up the MC window if the program is minimized. I am pretty sure any indicator with alerts enables would produce this since I have several cu...
- 20 Feb 2008
- Forum: MultiCharts
- Topic: Issues with Quote Manager
- Replies: 9
- Views: 3103
- 20 Feb 2008
- Forum: MultiCharts
- Topic: Annoying Popup window in latest Beta Still happens
- Replies: 9
- Views: 2891
- 19 Feb 2008
- Forum: MultiCharts
- Topic: New Beta Question
- Replies: 1
- Views: 1068
New Beta Question
Hi All,
I am trying to test out the new beta version 3363
I noticed that when I try to send a picture of a chart or workspace now by email it defaults to Outlook instead of my mail program I use. My mail program is the default program, but it seems MC is ignoring this. How do I change it back ?
thanks
I am trying to test out the new beta version 3363
I noticed that when I try to send a picture of a chart or workspace now by email it defaults to Outlook instead of my mail program I use. My mail program is the default program, but it seems MC is ignoring this. How do I change it back ?
thanks
- 18 Feb 2008
- Forum: MultiCharts
- Topic: Annoying Popup window in latest Beta Still happens
- Replies: 9
- Views: 2891
Annoying Popup window in latest Beta Still happens
Hi All,
I am running the latest beta 3363 and still have the MC main window pop up when a alert fires. Is there a way to turn off this annoying feature ?
Thanks
I am running the latest beta 3363 and still have the MC main window pop up when a alert fires. Is there a way to turn off this annoying feature ?
Thanks
- 15 Feb 2008
- Forum: MultiCharts
- Topic: Issues with Quote Manager
- Replies: 9
- Views: 3103
Hi Andrew, Thanks for the reply. You can possibly reproduce this long bar issue if you load 3-4 charts from opentick then do a task manager shutdown on MC. This will force a unexpected crash on MC. You will have to stop all other task loaded as well. When you load MC again and request history data i...
- 14 Feb 2008
- Forum: MultiCharts
- Topic: Issues with Quote Manager
- Replies: 9
- Views: 3103
Issues with Quote Manager
Hi MC, I have had this issue with MC for a long time and I keep hoping it will get fixed some day. If for some reason MC crashes or locks up as it did just a few mins ago on me. I have to shut down all the task running in the task manager. When I open back up MC and load my charts I get a huge bar i...
- 14 Feb 2008
- Forum: MultiCharts
- Topic: Annoying Window Focus feature
- Replies: 3
- Views: 1642
Annoying Popup
Hi All,
I installed beta 3363 and the focus issue of popping up MC when a alert triggers stil happens. Is there a option I need to uncheck ?
thanks
I installed beta 3363 and the focus issue of popping up MC when a alert triggers stil happens. Is there a option I need to uncheck ?
thanks
- 13 Feb 2008
- Forum: MultiCharts
- Topic: Annoying Window Focus feature
- Replies: 3
- Views: 1642
Annoying Window Focus feature
Hi,
How do I stop the MC main window from popping up over everything else when a alert fires. It use to only show the alert in the lower right part of the screen
Thanks
How do I stop the MC main window from popping up over everything else when a alert fires. It use to only show the alert in the lower right part of the screen
Thanks
- 12 Feb 2008
- Forum: MultiCharts
- Topic: Opentick Issues Big Time
- Replies: 2
- Views: 1054
Hi All This is the first outage I have had with Opentick. So for 15/month I think it is pretty good, but actually to get a full feed is about 40/month I determined that the new beta now loads data from opentick. On the other machine I run as a backup with the last released version somehow I had a co...
- 07 Feb 2008
- Forum: MultiCharts
- Topic: Indicator Issues With New Beta version
- Replies: 4
- Views: 1706
New beta Issues
Hi, I am trying to get the latest beta to work version 3.0.1123.3152 You are correct Mariana, I can not get my indicators to compile that I have written which use to run for previous versions. I have tried to compile them with MC close as well and got the same error. It has something to do with the ...
- 05 Feb 2008
- Forum: MultiCharts
- Topic: Indicator Issues With New Beta version
- Replies: 4
- Views: 1706
Indicator Issues With New Beta version
Hi, I am getting the error listed below on some custom scripts I wrote which have compiled and been working for years now. Please advise as to how to fix this issue. I do not have any charts open at the time I tried to compile, but the compiler still says the scripts are in use. Must I delete them f...
- 31 Jan 2008
- Forum: MultiCharts
- Topic: Array
- Replies: 0
- Views: 1215
Array
Hi All,
Does anyone know a way to sort a array of data to determine how many times a value is the same. Any thoughts or help would be appreciated.
Thanks
Does anyone know a way to sort a array of data to determine how many times a value is the same. Any thoughts or help would be appreciated.
Thanks
- 31 Jan 2008
- Forum: MultiCharts
- Topic: Locked ELD FIles
- Replies: 1
- Views: 1027
Locked ELD FIles
IS there any support to import ELD files that are protected ?
Thank
Thank
- 29 Jan 2008
- Forum: MultiCharts
- Topic: Array Question
- Replies: 2
- Views: 1269
- 28 Jan 2008
- Forum: MultiCharts
- Topic: Array Question
- Replies: 2
- Views: 1269
Array Question
Hi,
I am trying to figure out how to set a array size dynamically at the start of a script from a Input value. I have tried the code listed below but get a compile error. Any ideas ?
Thanks
Input ArraySize(64);
ARRAY: ArrayHolder[ArraySize](0);
I am trying to figure out how to set a array size dynamically at the start of a script from a Input value. I have tried the code listed below but get a compile error. Any ideas ?
Thanks
Input ArraySize(64);
ARRAY: ArrayHolder[ArraySize](0);
- 24 Dec 2007
- Forum: MultiCharts
- Topic: Opentick Feed Issue
- Replies: 1
- Views: 1257
Opentick Feed Issue
Hi, I am still having issues with opentick and MC. It seems Opentick's supplier of data likes to spike the OHLC at the close of the session which screws up charts and indicators. I Went into the quote manager and deleted the bogus ticks but my chart still shows the spike bar. How do I tell the chart...
- 15 Nov 2007
- Forum: MultiCharts
- Topic: Indicators State Machine
- Replies: 1
- Views: 946
Indicators State Machine
Hi, I was wondering if Andrew or someone who wrote the functions in MC could answer a quick question. I have developed a custom trading script using TradeCommander's DLL interface to IB. This allows me to send trades to IB automatically from a indicator. The issue I have noticed is when I have a tri...
- 15 Nov 2007
- Forum: MultiCharts
- Topic: OpenTick Feed Issues
- Replies: 5
- Views: 1639
- 08 Nov 2007
- Forum: MultiCharts
- Topic: OpenTick Feed Issues
- Replies: 5
- Views: 1639
- 07 Nov 2007
- Forum: MultiCharts
- Topic: Compile Issue
- Replies: 5
- Views: 2027
- 06 Nov 2007
- Forum: MultiCharts
- Topic: Easy Language Question
- Replies: 2
- Views: 1331
- 06 Nov 2007
- Forum: MultiCharts
- Topic: Compile Issue
- Replies: 5
- Views: 2027
- 05 Nov 2007
- Forum: MultiCharts
- Topic: Compile Issue
- Replies: 5
- Views: 2027
Compile Issue
Hi, I ran into a weird issue with a function I have been using for months. It will not compile and gives the error listed below on one of my machines. It works just fine on the other. Is there a way to tell what DLL is used in MC to functions so I can try to isolate the issue and correct it ? I have...
- 05 Nov 2007
- Forum: MultiCharts
- Topic: Easy Language Question
- Replies: 2
- Views: 1331
Easy Language Question
Hi, Does anyone know how to get a script to not process trigger conditions until after it has reached the last bar on a chart and currently up to date ? I am having a issue where as my custom script processes the amount of days loaded into the chart it starts to fire orders because it reached a trig...
- 05 Nov 2007
- Forum: MultiCharts
- Topic: OpenTick Feed Issues
- Replies: 5
- Views: 1639
OpenTick Feed Issues
Hi I was wondering if anyone else is experiencing a issue with getting data from Opentick. I have noticed that sometimes I get gaps in my chart randomly. If I request more data past the point, it still leaves the gap. If I delete the symbol from the quote manager and add it back in the issue is stil...
- 30 Oct 2007
- Forum: MultiCharts
- Topic: Usage Of A Array
- Replies: 3
- Views: 1393
- 28 Oct 2007
- Forum: MultiCharts
- Topic: Usage Of A Array
- Replies: 3
- Views: 1393
Usage Of A Array
Hi, Could someone please show me how to use a array statement in PL. I have tried to create an array of 32 locations and init them to 0 on start up. I am trying to store each tick price into a single array location for the duration of the bar. In this case my chart is set to 31 ticks so I created a ...
- 06 Sep 2007
- Forum: MultiCharts
- Topic: New beta Out ???
- Replies: 4
- Views: 1599
Hi, I am aware of how to uninstall and re-install MC since I have owned it and used it for almost 2 years. My issue is after I un-installed version 1050 and then re-run the 1109 install it puts 1109 correctly on my machine, but your splash screen always said 1050 while 1109 was installing. I just wa...
- 05 Sep 2007
- Forum: MultiCharts
- Topic: New beta Out ???
- Replies: 4
- Views: 1599
New beta Out ???
Is there a new beta released yet ?
I see a new install file 1109 dated Sept 03 2007, but when I run it the version comes up 1050 in the splash screen. Please clarify this for us.
Thanks
I see a new install file 1109 dated Sept 03 2007, but when I run it the version comes up 1050 in the splash screen. Please clarify this for us.
Thanks
- 29 Aug 2007
- Forum: MultiCharts
- Topic: Setexitonclose in Auto Trading
- Replies: 3
- Views: 1636
This is a free API that should allow you to do things intrabar. So far it has solved my dilema of needing to make trades intrabar. Some day hopefully soon MC will too have this capabilities Since the new forum rules won't allow me to post a address to the API you can find it on IB web site under fre...