Search found 89 matches

by ybfjax
01 May 2009
Forum: MultiCharts
Topic: Heikin Ashi candles and moving average
Replies: 0
Views: 1180

Heikin Ashi candles and moving average

From http://forum.tssupport.com/viewtopic.php?t=5982 Please consider adding Heikin-Ashi candles to Multicharts next release. Would be a real advantage to have it added to the core features in the next major Multicharts release. The concept is very simple and covered here: http://www.educofin.com/ha/...
by ybfjax
30 Mar 2009
Forum: MultiCharts
Topic: forex MT 4 brokers/ ea signals supported....
Replies: 1
Views: 1848

forex MT 4 brokers/ ea signals supported....

Are there any forex MT accts supported? Is there any plans to support these? I'm looking for 2 things: 1) EA signals to be exported into multicharts. Or Data to be exported from the broker via api into multicharts and theand the EA (expert adviser) can be re-coded into easylanguage/powerlanguage. 2)...
by ybfjax
13 Dec 2008
Forum: MultiCharts
Topic: Lost product registration code for lifetime license.....
Replies: 1
Views: 1499

Lost product registration code for lifetime license.....

I purchased a lifetime license from you all over a year ago, but have misplaced the license info. How do I go about retrieving the license code information? Thanks in advance.
by ybfjax
26 Sep 2007
Forum: MultiCharts
Topic: MC 2.1 RELEASE OUTPERFORMS COMPETITOR'S PLATFORMS
Replies: 7
Views: 1892

But how did you actually MEASURE the speed of each application? What tools did you use? What did you use to benchmark? You do not say how you actually benchmarked each charting package. Could you please specify the question? Also, did you try a different machine? Like a single-core Pentium 4? You sh...
by ybfjax
25 Sep 2007
Forum: MultiCharts
Topic: MC 2.1 RELEASE OUTPERFORMS COMPETITOR'S PLATFORMS
Replies: 7
Views: 1892

What did you use to benchmark? You do not say how you actually benchmarked each charting package.

Also, did you try a different machine? Like a single-core Pentium 4? You should try about 3 different machines to see how each one stacks up.
by ybfjax
11 Jun 2007
Forum: MultiCharts
Topic: OEC: KC-MN7 and other softs wont update....
Replies: 2
Views: 1330

I had FDAXM7 and FESXM7 did not start updating until 2:22 last night. This is terrible, because it should start updating at 0200. The OEC trader dom was updating fine. So I know it is not the data. I noticed the chart not updating and as I started to play around with another chart, all of a sudden t...
by ybfjax
04 Jun 2007
Forum: MultiCharts
Topic: Ability to copy/paste charts between workspaces is critical
Replies: 19
Views: 4496

So, is this ability in the 2.1 Beta?
Yes, coping/pasting is available in the new beta.
Ah, great news! Would it be possible to post a screenshot of how it is done?
Yes. I right-clicked on a chart and I didn't see this option to "copy chart"
by ybfjax
04 Jun 2007
Forum: MultiCharts
Topic: OEC: KC-MN7 and other softs wont update....
Replies: 2
Views: 1330

OEC: KC-MN7 and other softs wont update....

I noticed that those soft symbols do not update with the OEC plugin with this new version as of Monday on. I shut down and restarted, but nothing has changed :(

I also can't get historical data.
by ybfjax
03 Jun 2007
Forum: MultiCharts
Topic: Feature requests topic and poll
Replies: 231
Views: 85300

Please make the "MultiCharts" logo smaller on printouts.
There should be no MC logo, or the logo should be VERY TINY for those who have paid for their license.
by ybfjax
01 Jun 2007
Forum: MultiCharts
Topic: MultiCharts 2.1 Beta
Replies: 93
Views: 39169

The new beta looks pretty solid. It may be too late for this release for a new simple request but it would be nice if you saved User Defined scaling properties for each chart. Every time MC is started I have to go through and rescale about 25 charts (5 workspaces each with 3 -5 charts). Thanks, ~mo...
by ybfjax
01 Jun 2007
Forum: MultiCharts
Topic: When will be the next MultiChart Update ? [SOLVED]
Replies: 40
Views: 15258

Re: Think recompiling your studies before launching Mutichar [SOLVED]

The beta looks good for now..

Think to recompile all your studies before launching Mltchrts
Yeah. I had to learn the hard way. Anything not built-in had to be recompiled. We'll see what happens.
by ybfjax
31 May 2007
Forum: MultiCharts
Topic: MC crashes and now data is wrong
Replies: 9
Views: 2919

You did nothing else in the interim. Just installed and crash?
by ybfjax
31 May 2007
Forum: MultiCharts
Topic: When will be the next MultiChart Update ? [SOLVED]
Replies: 40
Views: 15258

What happened to the e-mail that was supposed to be sent to everyone regarding the new release? I was thinking you all never released the beta or new version yet.
by ybfjax
22 May 2007
Forum: MultiCharts
Topic: When will be the next MultiChart Update ? [SOLVED]
Replies: 40
Views: 15258

every 2 weeks ?!?! what for ? can't you guys let them concentrate to do their work ?[/quote] Case in point. When I tested out OEC plugin. If users waited until the next release, they would have been disappointed when the errors of logging in and downloading a lot of symbols took place. The point of ...
by ybfjax
22 May 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Yep. Overall, this improvement in CPU usage makes all of the charts load a lot faster. And adding new charts appear to be much faster.
by ybfjax
22 May 2007
Forum: MultiCharts
Topic: When will be the next MultiChart Update ? [SOLVED]
Replies: 40
Views: 15258

Good. I hope in the future you do release complete beta versions more frequently. Every 2 weeks or so. So we can digest the changes in smaller bites :D. I guess I'll hear from you soon!
by ybfjax
22 May 2007
Forum: MultiCharts
Topic: Red Arrow in indicator listing....
Replies: 4
Views: 1828

Ok. I found the 'bad' word. it is SetBreakEven(). The line of code is: If BreakEvenTks<>0 then SetBreakEven(BreakEvenTks*Tks*BigPointValue); It seems as if the entire code compiled correctly, and that was the only word not supported. when will this word be supported? I will first check to see if the...
by ybfjax
21 May 2007
Forum: MultiCharts
Topic: Red Arrow in indicator listing....
Replies: 4
Views: 1828

Red Arrow in indicator listing....

I was wondering what the red arrow on the indicator listing meant? Normally, when the code compiles correctly, there is a green arrow that shows in the status column. Or a padlock, or nothing at all. Never noticed a red arrow before, so I figured I'd get a definite answer from admin. Speaking of whi...
by ybfjax
21 May 2007
Forum: MultiCharts
Topic: When will be the next MultiChart Update ? [SOLVED]
Replies: 40
Views: 15258

I figured I'd bump this up to see how things are coming along for the next release of MC.
by ybfjax
18 May 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Ok. About the CPU usage. I noticed that MC actually doesn't use much CPU. Neither does OEC Trader, EXCEPT when you have the quote window open with a LOT of quotes So I just closed out the OEC trader quote window entirely and about 1/3-1/2 of my CPU usage came back. But I need the quote window to pul...
by ybfjax
17 May 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Now I am loading my charts (I have about 100 individual charts, although only about 20 unique symbols). I had shut down MC to restart and it took about 50 minutes for the charts to load. The chart data didn't start appearing until about the 45 minute mark. I didn't get that "too many history request...
by ybfjax
10 May 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

But since I only run ONE instance of MC and shut down and restarted MC and with the new API, it is good. I wanted to confirm: I no longer need the api version of the demo (special demo). I can use a regular demo acct to access this OEC plugin, correct? If the API demo will no longer work, I will hav...
by ybfjax
09 May 2007
Forum: MultiCharts
Topic: Data Lag with multiple instances of MC open
Replies: 0
Views: 1411

Data Lag with multiple instances of MC open

I figured I'd break this off to a separate topic as it may affect other data feeds. I have 4 instances of MC open simultaneously with the OEC feed. I've also noticed something else. I opened up my dom for my trading platform and realized that MC QMM7 and QGM7 were lagging about 5-10 seconds behind c...
by ybfjax
08 May 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Josh, Thank you for your time and help in beta-testing of this plug-in. You are welcome. BTW, the data loading is MUCH faster. Great job. I still feel like when loading multple symbols it gets hung up a bit, but It is what it is. Here is a screenshot of opening 2 workspaces in 2 separate instances ...
by ybfjax
07 May 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Update

I've been working with admin over the last several days and we were able to repair most of the problems associated with the OEC plugin So the developer made some changes: 1) There was a problem where api.openecry.com wouldn't get data for certain symbols (the softs mainly). So we switched the server...
by ybfjax
02 May 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

I cannot get any data for the OEC softs:

KC-MN7
CC-MN7
SB-MN7


The data is there. I was able to pull it with NeoTicker (when I had the acct with them).
by ybfjax
01 May 2007
Forum: MultiCharts
Topic: returning values "exactly n days ago" & "
Replies: 3
Views: 1808

But now I am having a problem. What if I do not want an indicator to show up until price bars actually hit it? I noticed that the price bar actually hits the HH LL line, . It's like both the lines lines stay on the screen, even if current prices are not near one of the lines. The line is being drawn...
by ybfjax
01 May 2007
Forum: MultiCharts
Topic: Does MC support "Once"?
Replies: 1
Views: 1250

Does MC support "Once"?

There was some code that I was working on and I was wondering if MC supported the reserve word "Once"? When I was using the PLE editor, the word didn't seem to be recognized when I tried to compile it. Once Plot_OK = True ; It came up as an error: ------ Compiled with error(s): ------ Common error e...
by ybfjax
01 May 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Now I am not getting errors, but the data requests are coming up empty. In other words, your software is requesting the data, but isn't actually downloading anything Remember, I've only requested a total of 7 symbols so far (about 3 weeks for each symbol). This results in all new symbols requested t...
by ybfjax
01 May 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Too many history requests. but some good news. MC automatically reconnected to the live feed immediately (towards the bottom of the screenshot). I closed out the 6A 5min chart and reopened it. I got that gap thing again. But I tried that trick I mentioned above (adding the desired timeframe as a sub...
by ybfjax
01 May 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

The same thing happened to 6JM7. (no screenshot because I used the same chart instead of a new chart window). But I noticed something. It seems like if you ADD a symbol as a subgraph to an existing chart with a different timeframe, there is no gap in the data. When I did this with the 2m and added t...
by ybfjax
01 May 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

I noticed

The data appears to be coming in fine for intraday. I am currently adding more workspaces and more charts. I am using a comcast internet connection. With NeoTicker, I was able to obtain intraday data back to April 4th, 2007. But that was 2 weeks ago. So apparently, you can only obtain a rolling 2 we...
by ybfjax
01 May 2007
Forum: MultiCharts
Topic: returning values "exactly n days ago" & "
Replies: 3
Views: 1808

Does multicharts support these functions? HighD() Gets the High price from N days ago in an intraday chart (minute or tick). LowD() Gets the Low price from N days ago in an intraday chart (minute or tick). CloseD() Gets the Close price from N days ago in an intraday chart (minute or tick). OpenD() G...
by ybfjax
30 Apr 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

how much historical data is available from openecry? It's supposed to be 3 months of minute data. tick data seems to only be streaming. But in reality, only about 2-3 weeks of minute data is saved. Daily bars is about 3 months. I think their programmers are in the process of correcting that so that...
by ybfjax
27 Apr 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

One thing I noticed. If you try to connect via Quotemgr, and then have a chart open at the same time in multicharts, you get an error that user is already connected. This is interesting, as I would have thought that quotemgr would share its connection with MC. OEC only allows one username to be used...
by ybfjax
27 Apr 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Okay. It appears as if they did set me up with the username/password. I was able to login to OEC from the quotemgr. However, when I type * to search for all symbols, I cant do this. When I connected with live support, they were able to do this. In fact, I cannot pull a single symbol. But we are maki...
by ybfjax
27 Apr 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Brian Weis
Okay. I was in contact with Dan, my main customer support contact. He said he will set me up with the correct username and password. I will report what happens today with the feed.
by ybfjax
27 Apr 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Dear customers,

Open E Cry asks you to contact them and they will create a testing login for everyone who wants to participate in this testing.
who did you talk to?
by ybfjax
27 Apr 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

The OEC betas wont work for current clients of OEC. Do you have a beta that works with the existing api that demo and live accts are on right now for OEC? That would be nice, as we don't know when exactly OEC will put out the new API. Please advise. If anyone was able to login to OEC feed (besides a...
by ybfjax
27 Apr 2007
Forum: MultiCharts
Topic: returning values "exactly n days ago" & "
Replies: 3
Views: 1808

returning values "exactly n days ago" & "

I was wondering if you can return a value exactly from the nth day? For example, I want the close exactly 10 days ago (not bars, actual calender or trading days). Also, could you look over a period n days ago and return a value? For example, over the past 20 days (not bars) I want the lowest open. P...
by ybfjax
27 Apr 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Dear customers, OpenECry changed their API.dll that is pointing to their server, so please download the new plug-in, unzip it and run regoecdatafeed777.bat. First time when you open QuoteManager this plug-in will be registered, then please close QuoteManager and open it again. Let me clarify. Do I ...
by ybfjax
27 Apr 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

I agree - any big announcements, such as this, NEED to be sent via email, not buried on a forum page. I realize this is not a big deal if you do not use OEC, but for those that do, this is a very nice addition. It eliminates the need for paying for data and you can work with your broker. Not just O...
by ybfjax
26 Apr 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Funny. I'm charting with neoticker and the OEC datafeed is working just fine.

Anyway, let's say you didn't install the first OEC plugin yet. Do I still follow the instructions with the .bat file?
by ybfjax
26 Apr 2007
Forum: MultiCharts
Topic: New to MC, coming from TS and a few questions...
Replies: 27
Views: 5032

You may want to consider tweaking windows a bit. http://forum.tssupport.com/viewtopic.php?t=3572 . When I test out OEC when I get my new demo login, I will see if this improves MC any. I can see somewhat of an improvement between OEC trader and NeoTicker. Before the tweaks, I couldn't even run the 2...
by ybfjax
26 Apr 2007
Forum: MultiCharts
Topic: Windows registry tricks for improving performance.....
Replies: 0
Views: 1009

Windows registry tricks for improving performance.....

Here is an article that neoticker provided that "may" help some people here with performance issues, particularly with multiple windows. http://newsletter.neoticker.com/?p=175 I will report back here when I determine the results of these processes. Be sure to backup important files and have a copy o...
by ybfjax
24 Apr 2007
Forum: MultiCharts
Topic: OpenECry data source plugin
Replies: 36
Views: 9241

Thanks. Next time send out an e-mail. Due to the OEC configuration, you can only login to OEC once at a time. So I will have to have another demo acct setup for MC. I am assuming you have setup for both demo and live accts right? I'll find out later tomorrow or over the weekend. Another thing....you...
by ybfjax
24 Apr 2007
Forum: MultiCharts
Topic: MC should release more betas in-between major releases.....
Replies: 1
Views: 832

MC should release more betas in-between major releases.....

I was reviewing the topic on when the next release would be sent out here . I think that MC would be served a lot better if new betas were released every 2-4 weeks. Rather than releasing a big improvement, release them in small dosages, so that we all (including TS support) can track the bugs better...
by ybfjax
24 Apr 2007
Forum: MultiCharts
Topic: Historical Tick collection for OEC/Transact....
Replies: 1
Views: 888

Historical Tick collection for OEC/Transact....

For the datafeeds that do not have intraday tick storage, is there any plans for MC to setup servers to collect these ticks?

For example, SC does this with TransAct. It stores the ticks in 2 second bars
by ybfjax
24 Apr 2007
Forum: MultiCharts
Topic: multi-threading for optimizations
Replies: 7
Views: 2182

Will the performance increase only be seen in optimiztion, or will it increase performance for all aspects of the program?
Good question.
by ybfjax
21 Apr 2007
Forum: MultiCharts
Topic: New to MC, coming from TS and a few questions...
Replies: 27
Views: 5032

For those of you following the thread, TS Support determined my problem with many workspaces over three monitors (2 video cards) is caused by lack of video memory. I have 128MB on card 1 and 64MB on card 2 which just isn't enough to support the many charts/workspaces that I'm trying to run. Accrodi...
by ybfjax
20 Apr 2007
Forum: MultiCharts
Topic: Tick Count Down when using Trade Volume?
Replies: 2
Views: 1875

Re: Tick Count Down when using Trade Volume?

I use 120 tick bars and set the "Build Volume On:" to "Trade Volume" (because I measure the actual contracts traded in an indicator). I would like to use a little text indicator I wrote for TS2000i that counts down the remaining ticks before the current bar close. I have it set up in the right marg...
by ybfjax
18 Apr 2007
Forum: MultiCharts
Topic: When will be the next MultiChart Update ? [SOLVED]
Replies: 40
Views: 15258

Re: openecry support? [SOLVED]

Will there be openEcry support?
Yes, the next version will support OpenECry.
Yes. I will be one of the first to test it out. I hope you all have tested it out both historical and real-time feeds. I will certainly be working them with OEC.
by ybfjax
16 Apr 2007
Forum: MultiCharts
Topic: Why I won't change from TS8 to MC [SOLVED]
Replies: 6
Views: 2600

...............I've used Ensign for a long time but I don't like Howard's attitude regarding enhancements. Their UI technology is already way outdated and for a software company to tell someone that a common features will never be done is a cardinal sin. Howard is a smart guy but he's clueless when...
by ybfjax
16 Apr 2007
Forum: MultiCharts
Topic: When will be the next MultiChart Update ? [SOLVED]
Replies: 40
Views: 15258

openecry support? [SOLVED]

Will there be openEcry support?
by ybfjax
30 Mar 2007
Forum: MultiCharts
Topic: Importing data problem: ascii Mapping error.....
Replies: 4
Views: 1267

Josh, Ascii import is used with tick, minute and day resolutions which are saved in the data storage and then other resolutions can be created on their basis. If you want to use other resolutions (tickbars, for instance) you should use Ascii mapping. In case of ascii mapping data is taken directly ...
by ybfjax
30 Mar 2007
Forum: MultiCharts
Topic: Cross-Hair and Tracking Modes should be 're-designed'
Replies: 11
Views: 2492

We will try to redesign "cursor tracking mode" functionality later.
Yes. Thank you for acknowledging this.
by ybfjax
27 Mar 2007
Forum: MultiCharts
Topic: Highest H/lowest L/Donchian Channels; custom scale digits
Replies: 2
Views: 1101

Re: Highest H/lowest L/Donchian Channels; custom scale digit

Do you offer a form of Donchian Channels? This study should be available somewhere, please check: http://forum.tssupport.com/viewtopic.php?t=3339 Or can I create a Highest High or Lowest Low indicator line drawn over xx number of bars or xx number of time? This code is very simple: input: length(14...
by ybfjax
27 Mar 2007
Forum: MultiCharts
Topic: Merged data and data collection questions....
Replies: 3
Views: 1147

Josh, When you merge data from different data sources, you should remember that data received in real-time is not saved the storage and if you change the resolution you may have gaps on the chart until you update the history data (it is possible if you use acsii files). So if you change the resolut...
by ybfjax
24 Mar 2007
Forum: MultiCharts
Topic: Importing data problem: ascii Mapping error.....
Replies: 4
Views: 1267

I just don't see why I can't just import the data directly to a symbol using the "ASCII data import" tool (right-click on a symbol listed in quote manager and select import). You can import via tick, minute, or day. But the volume and tickbar options aren't there like they were with the mapping. If ...
by ybfjax
24 Mar 2007
Forum: MultiCharts
Topic: Importing data problem: ascii Mapping error.....
Replies: 4
Views: 1267

Importing data problem: ascii Mapping error.....

I am attempting to import a symbol for text file. When I go to map the data, I select the tick bar resolution (it's already pre-selected). The resolution # is set to "n/a". Therefore, I do not attempt to edit this box. Well, after I'm done editing the import settings for the symbol, I come back to t...
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: What is really unique about MultiCharts, and TSSupport?
Replies: 9
Views: 2626

Nick, What features and improvements should we add to make you satisfied? :) Phone tech support should be available AFTER day trading hours. I noticed right now it is from 6:30 AM till 2:00 PM EST. That's about when most trading takes place. Phone support should be available from, say 1030 to 6:30 ...
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: Cannot Delete Bad Data
Replies: 3
Views: 1107

To edit bad ticks: 1. EDIT bad ticks, and not DELETE them (leave the time stamps, edit the price/volume data; you may use the last good tick data preceeding the first bad tick to keep the chart smooth). Otherwise on the next run QM checks the database integrity and downloads bad ticks again. 2. Aft...
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: Cross-Hair and Tracking Modes should be 're-designed'
Replies: 11
Views: 2492

Re: Cross-Hair and Tracking Modes should be 're-designed'

I have previously commented (privately) to TS SUPPORT about how frustating it is to use the cursor-crosshair tracking modes. I will repeat here my complaint and suggestion for improvement: Once you click the toolbar choice for vertical cursor line and/or tracking mode, the vertical line is moving A...
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: How Irritatiing is THIS?
Replies: 13
Views: 2746

if I had known this product was only in beta, I would not have bought it.
It is clearly posted as being in a beta format.


Anyway, I did notice this problem as well. I thought it was just me.
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: Merged data and data collection questions....
Replies: 3
Views: 1147

Merged data and data collection questions....

Once you import data, you can then manipulate it however you wish, right? I saw the data merging tutorial. On slides 21-26 of the tutorial, it talks about defining resolution. My question is, when adding real data, can you change the resolution of the chart? What if I want to convert to minute or ot...
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: Highest H/lowest L/Donchian Channels; custom scale digits
Replies: 2
Views: 1101

Highest H/lowest L/Donchian Channels; custom scale digits

Do you offer a form of Donchian Channels? Or can I create a Highest High or Lowest Low indicator line drawn over xx number of bars or xx number of time? How do you adjust the decimal scale on a chart so that only a user-defined amount of digits displayed on the actual axis.? For example, MultiCharts...
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: 2 datafeeds at once? TransAct and IQ feed. Problems DTN...
Replies: 2
Views: 1186

Josh, If you want us to solve such issues faster, please contact us via our live chat or give us a call. We can converse for a long time trying to guess what is going on with your charts. But if you can contact us and allow to connect to your desktop via HelpDesk and analyze the problem with IQfeed...
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: How do I create a volume bar chart?
Replies: 4
Views: 1273

you create a volume bar chart the same way you create a minute chart. you create a volume bar chart from the very beginning, as soon as you specified a symbol, you go to specify whether it is a minute chart or a volume bar chart. there is no need to re-define the chart attribute. The option wasn't ...
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: How do I create a volume bar chart?
Replies: 4
Views: 1273

INSERT / SYMBOL / SETTINGS / compression = contracts
Yes. I see that you have to first create a chart, and then switch it over. luckily for me, it creates the subsequent charts defaulted to the volume bar chart.

There should be a way to create the volume bar chart from the get go. Oh well.
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: 2 datafeeds at once? TransAct and IQ feed. Problems DTN...
Replies: 2
Views: 1186

2 datafeeds at once? TransAct and IQ feed. Problems DTN...

I am having an issue loading IQ-feed data. The symbol SWM7 loaded fine. Then I tried to load MTJ7 and it's stalling. Other symbols seem to stall as well. It appears as if I cannot load 2 different datafeeds at once. I have DTN-IQ feed up with a few symbols. Then I tried loading a symbol, FDAXM7 from...
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: How do I create a volume bar chart?
Replies: 4
Views: 1273

How do I create a volume bar chart?

How do I create a volume bar chart. I notice the charts are setup for minutes. How do I start fresh with a volume-based chart?
by ybfjax
23 Mar 2007
Forum: MultiCharts
Topic: Pats System Data
Replies: 1
Views: 1102

Re: Pats System Data

Anyone using Pats for their European and U.S. futures data with MC?

What is the quality like? Does it go down?

Any feedback would be appreciated.

Thanks
I am also curious to know the answer to this as well. Please advise.
by ybfjax
13 Mar 2007
Forum: MultiCharts
Topic: Transact data plugin....
Replies: 12
Views: 2515

It will take 1-2 months approximately.
Okay. If you can beat SC to this, you may be in luck. I've already got the permanent license, but I'll start using the software more often :)
by ybfjax
12 Mar 2007
Forum: MultiCharts
Topic: Transact data plugin....
Replies: 12
Views: 2515

Any news on the OEC trader datafeed? ( www.openecry.com )
We have come to an agreement with "Open e Cry" and are planning to implement a data plug-in for them.
Any timeframe on this?
by ybfjax
07 Mar 2007
Forum: MultiCharts
Topic: Transact data plugin....
Replies: 12
Views: 2515

Paolo, If Transact is not present in the list of Data Sources, please contact us via the live chat or give us a call. Transact feed is working okay. I haven't used your platform in a while. I did get the license, as I feel it has a lot of potential. But you still have some things to work out with t...
by ybfjax
24 Feb 2007
Forum: MultiCharts
Topic: Chart Copying and pasting and Line thickness.....
Replies: 3
Views: 1114

Chart Copying and pasting and Line thickness.....

I was wondering if there was a way to copy and paste a chart within the same workbook. More importantly, to copy and paste a chart between workbooks. Also, I dont know if I mentioned this before, but the line thickness of the MA lines is terrible. I moved up 1 notch from the thinnest line, to the se...
by ybfjax
24 Feb 2007
Forum: MultiCharts
Topic: Transact data plugin....
Replies: 12
Views: 2515

Okay. I see. But first, I had to set one symbol up manually in QuoteWindow. Hopefully not ALL the symbols. Just one. That wouldn't be good. SC has a way in which they automatically pull all of the symbols that your acct is activated for and allow you to select from a list which charts to open initia...
by ybfjax
24 Feb 2007
Forum: MultiCharts
Topic: OpenEcry.com support and market replay....
Replies: 6
Views: 3052

Do you know if they offer tick data Josh ? For 25/month it would indeed be a good feed source if MC can support it. IB is a good free feed, but their candle building on tick charts looks nothing like esig charts. I would like to see how OpenECry does Yes. They actually have a trade-on-the-chart fea...
by ybfjax
24 Feb 2007
Forum: MultiCharts
Topic: Transact data plugin....
Replies: 12
Views: 2515

Dear ybfjax, Are you able to see TransAct as it shown on the screenshot attached? Is this in the multicharts platform, or the quote manager? When I initially went to open a new chart in the multicharts platform, I didn't see it. But I did see something in the Quote manager for transact. But it shou...
by ybfjax
23 Feb 2007
Forum: MultiCharts
Topic: OpenEcry.com support and market replay....
Replies: 6
Views: 3052

Hi, I downloaded OpenCry's demo package and was impressed on how fast data downloaded. It also seemed to be a lot closer to datafeeds such as esig or TS. I think it would be a good feed for MC if you could implement it somehow. IB tends to have holes in data. I did not however see any tick data fro...
by ybfjax
23 Feb 2007
Forum: MultiCharts
Topic: Transact data plugin....
Replies: 12
Views: 2515

Transact data plugin....

I noticed that transact is supposed to be supported here: http://www.tssupport.com/products/multicharts/datamanagement/#datasource . Well, how do I go about selecting it as a datafeed? I don't see it in the drop-down menu when I go to open a new chart. Please advise. I'm using MultiCharts 2.0.777.777
by ybfjax
23 Feb 2007
Forum: User Contributed Studies and Indicator Library
Topic: Current price line study....
Replies: 3
Views: 2491

Current price line study....

I was wondering if MC had or could have a study that automatically drew a horizontal line that changed with the current price. This line extends back throughout the chart history. The purpose was to see where current prices could touch support and resistance or other chart reaction points in the pas...
by ybfjax
23 Feb 2007
Forum: MultiCharts
Topic: OpenEcry.com support and market replay....
Replies: 6
Views: 3052

We had no requests for OpenEcry before, if they contact us, we'll be glad to communicate with a potential partner. The TransAct will be added in the next beta to be released. As to data playback, a complete properly working version will be available in the first quarter of the next year. I was just...
by ybfjax
29 Dec 2006
Forum: MultiCharts
Topic: IB backfill problem (pacing violation) [SOLVED]
Replies: 20
Views: 14732

it's a IB problem [SOLVED]

As a follow-up, Ensign Software's IB refresh also failed. I had to update using their DTN feed. This is definitely an IB problem and I don't think there is anything MC can do to resolve this, other than display charts with available data. ~mojo SC has said that IB's backfill has ALWAYS been unrelia...
by ybfjax
24 Nov 2006
Forum: MultiCharts
Topic: OpenEcry.com support and market replay....
Replies: 6
Views: 3052

OpenEcry.com support and market replay....

There were two additional feature questions that I had? Could you all support the OpenEcry tick datafeed? That would be wonderful OpenEcry support did say that they would try to contact you all on Monday or so. I told the guy I would post on the forum as well. www.OpenEcry.com . They have an API to ...
by ybfjax
16 Nov 2006
Forum: MultiCharts
Topic: Integrate brokerage, Trade from chart,
Replies: 1
Views: 956

Integrate brokerage, Trade from chart,

I thought I posted this a few days ago, but the post did not go through (that has happened a few times on this board. So let's see if I remember what I wrote. 1) Integrate brokerage data. The particular one I was referring to is www.transactfutures.com . I would love to take their feed and create ch...
by ybfjax
14 Nov 2006
Forum: MultiCharts
Topic: Copy/paste window, new datafeed, and trading from the chart:
Replies: 1
Views: 988

Copy/paste window, new datafeed, and trading from the chart:

I was glad to see that some of my suggestions were actually in the software, although I had to dig. 1) Can you copy and paste a window? Having to start the new window process is a bit cumbersome. 2) A new feature request is to allow support for InfinityBrokerage (TransActFutures) www.infinitybrokera...
by ybfjax
10 Nov 2006
Forum: MultiCharts
Topic: E-mini russell missing data for no reason.
Replies: 1
Views: 1138

E-mini russell missing data for no reason.

When I loaded ER2 (emini Rusell for TS) 30 sec, 1 min and 5 minute charts onto MC, I notice that it skips from 00:18:00 to 10:00. It did NOT do this for the e-mini nasdaq NQ charts (nasdaq properly shows the whole 24 hour period). I did NOTHING different. So what happened to my data? Loads in TS jus...
by ybfjax
08 Nov 2006
Forum: MultiCharts
Topic: Feature requests topic and poll
Replies: 231
Views: 85300

Don't overlook the simple stuff....

1) User should be able to add xxx blank bar space to the right of the chart, configurable from the preferences and saved as a default. 2) When pulling data for a chart, user should be able to specify xx days back, instead of having to calculate/configure the days manually. 3) Fixed scaling PLEASE. N...

Go to advanced search