Hello
I put manually on a daily chart some annotation and trendline. Using the toolbar I'm selecting a a 10 minutes scale of the same charts on the same workspace
The trendline is displayed, but not the annotation. Any idea why?
Martin
Search found 1292 matches
- 03 Sep 2013
- Forum: MultiCharts
- Topic: Annotation (Text) not show on a lower scale [SOLVED]
- Replies: 3
- Views: 1687
- 01 Sep 2013
- Forum: MultiCharts
- Topic: Trade Management web problem
- Replies: 1
- Views: 4244
Trade Management web problem
Hello I'm trying to get in Trade Management web site and I can't here is the message Exception caught There was en error trying to load and initiate the B2 engine. User tss_5 already has more than 'max_user_connections' active connections in /usr/home/tss/public_html/multichartscom/pm/include/B2DB/m...
- 27 Aug 2013
- Forum: MultiCharts
- Topic: Is it possible to use PL Editor from a command line? [SOLVED]
- Replies: 2
- Views: 1733
Re: Is it possible to use PL Editor from a command line? [SOLVED]
If I recall, I had done such request in the past. I will post another oneHello Arjfca,
Unfortunately it is not possible by means of Command Line. If your goal is automated backup, please leave us such feature request.
Have a good day
Martin
- 26 Aug 2013
- Forum: MultiCharts
- Topic: MultiCharts 8.7 Release New Builds 7633/7634
- Replies: 67
- Views: 28640
Re: MultiCharts 8.7 Release New Builds 7633/7634
A 1000$ dollars question I usually go bling with upgrade, but this time, I'm not so sure. I'm using Kaspersky. is it safe to upgrade. Do I get a chance to have my antivirus trigger false alarm. If so, I will wait for the next patch. If problem arise, is it possible to revert to the actual version? ...
- 24 Aug 2013
- Forum: MultiCharts
- Topic: MultiCharts 8.7 Release New Builds 7633/7634
- Replies: 67
- Views: 28640
Re: MultiCharts 8.7 Release New Builds 7633/7634
A 1000$ dollars question I usually go bling with upgrade, but this time, I'm not so sure. I'm using Kaspersky. is it safe to upgrade. Do I get a chance to have my antivirus trigger false alarm. If so, I will wait for the next patch. If problem arise, is it possible to revert to the actual version? M...
- 24 Aug 2013
- Forum: MultiCharts
- Topic: Is it possible to use PL Editor from a command line? [SOLVED]
- Replies: 2
- Views: 1733
Is it possible to use PL Editor from a command line? [SOLVED]
Hello
Is it possible to send a compile all and export indicators signals from a command line.
The purpose: create an automatic backup system for MC
Martin
Is it possible to send a compile all and export indicators signals from a command line.
The purpose: create an automatic backup system for MC
Martin
- 22 Aug 2013
- Forum: MultiCharts
- Topic: Text to speak dll
- Replies: 8
- Views: 2872
Re: Text to speak dll
Did try the demo49.95$ USD is cheap... I would go for it.
A robot as a nicer voice than this. It look like the voice from a Comodore 64..( for the oldies)
Martin
- 21 Aug 2013
- Forum: MultiCharts
- Topic: Shut down an indicator via code? is it possible
- Replies: 5
- Views: 2361
Re: Shut down an indicator via code? is it possible
right click on chart, select Remove All Drawings . if you want your drawings back, use " Jump " to go back one bar, then click on the " Terminate Playback " icon. MultiCharts will redraw all objects. I like your idea. But you know me,... I like to automatise all steps... It would be interesting if ...
- 21 Aug 2013
- Forum: MultiCharts
- Topic: Text to speak dll
- Replies: 8
- Views: 2872
Re: Text to speak dll
A friend send me this link of a Text to Voice C# code Maybe a C# expert could addapt it to be coded as a dll for MC Link: http://forum.unity3d.com/threads/56038-Text-to-Speech-Dll-for-Win32 e: // Voice Speaker (c) ZJP // // Windows 32B >> Copy 'Voice_speaker.dll' in windows\system32 folder // Window...
- 21 Aug 2013
- Forum: MultiCharts
- Topic: Shut down an indicator via code? is it possible
- Replies: 5
- Views: 2361
Shut down an indicator via code? is it possible
Hello Is there a way to cancell all plotted info on a chart from the code. I would like to have a cleaner chart when I look at my chart using a narrow bar spacing. I'm able to read the bar spacing using getappinfo(aiBarSpacing). I see that the value is modified whenever I use the icone on my bar to ...
- 20 Aug 2013
- Forum: MultiCharts
- Topic: Text to speak dll
- Replies: 8
- Views: 2872
Re: Text to speak dll
Not exactly a TTS... but there is enough AI and flexibility to tide you over for now: e.g. var: sound$(""); if barinterval = 5 then sound$ = "5min_going_up.wav" else if barinterval = 1 then sound$ = "1min_going_up.wav"; If up.condition = true then playsound( "c:\soundfiles\" + sound$ ); Hello TJ I ...
- 20 Aug 2013
- Forum: MultiCharts
- Topic: Text to speak dll
- Replies: 8
- Views: 2872
Re: Text to speak dll
I think you can record your own .wav file (using free online or windows software) and you can record any sound that you want.. PlaySound("C:\mysound.wav"); Hello Sptrader As mentionned, I'm already using the playsound command. I use ATT Text to speech webpage to create the message. https://www.goog...
- 20 Aug 2013
- Forum: MultiCharts
- Topic: Text to speak dll
- Replies: 8
- Views: 2872
Text to speak dll
Hello
Anybody as ever heard about a Text to Speak dll the could be run with MC. It would be interesting to have a tool like that. I,m already using the "play" command, but these has predefined voice message. I would like it to be more versatile.
Martin
Anybody as ever heard about a Text to Speak dll the could be run with MC. It would be interesting to have a tool like that. I,m already using the "play" command, but these has predefined voice message. I would like it to be more versatile.
Martin
- 02 Aug 2013
- Forum: MultiCharts
- Topic: Project Management: Is there a problem? [SOLVED]
- Replies: 6
- Views: 3595
Project Management: Is there a problem? [SOLVED]
Hello Today is August 02 at 3:45 am Easter Time ( New-York). I'm trying to report a request on Project Management, but it doesn't work. I can't go further than selecting I'm logged - Request new feature - Affected component: charting Feature to request: From the Data Window: Allow to click on the in...
- 01 Aug 2013
- Forum: MultiCharts
- Topic: Adding to Powerlanguance: Hide function.. Vote for it pls.
- Replies: 0
- Views: 2286
Adding to Powerlanguance: Hide function.. Vote for it pls.
Hello I did create a request to MC to add a function to Powerlanguage to allow an indicator to be set to "HIDE". Actually, we can set it manually, but every time the indicator is modify, we need to reset it again. Since some of my indicators ar use on more than 10 charts, it is a pain in the a.... w...
- 31 Jul 2013
- Forum: MultiCharts
- Topic: Strange BUG between IB and MC
- Replies: 5
- Views: 2491
Re: Strange BUG between IB and MC
Have you try to reload your data
It look like a glitch in your quote database
Martin
It look like a glitch in your quote database
Martin
- 31 Jul 2013
- Forum: MultiCharts
- Topic: Is there a way to get the Window caption name of Workspace
- Replies: 1
- Views: 2395
Is there a way to get the Window caption name of Workspace
Hello I want to use Excel to select and bring upfront a workspace Is there a function or a way to display the Window Caption name related to a specific workspace The window caption name is what appear at the top of a workspace Exemple: One of a workspace that I have is: "MultiCharts - 2250_Tick _Eur...
- 24 Jul 2013
- Forum: MultiCharts
- Topic: Trend linre replicator: Does it exist?
- Replies: 0
- Views: 1135
Trend linre replicator: Does it exist?
Hello
I don't want to re-invent the weel, so before coding I want to know if any of you has worked or seen on a trend line replicator that will replicate a created trend line on a chart to another workspace.
I remember to have seen a tool like that, but I just can't remember where.
Martin
I don't want to re-invent the weel, so before coding I want to know if any of you has worked or seen on a trend line replicator that will replicate a created trend line on a chart to another workspace.
I remember to have seen a tool like that, but I just can't remember where.
Martin
- 24 Jul 2013
- Forum: MultiCharts
- Topic: Where to get historical data
- Replies: 1
- Views: 1020
Where to get historical data
Hello
Where can I download monthly historical data. IB, my data server give me only 1 year (12 bars)
In the past, i did download from Dukascopy, but my links doesn't work anymore.
Martin
Where can I download monthly historical data. IB, my data server give me only 1 year (12 bars)
In the past, i did download from Dukascopy, but my links doesn't work anymore.
Martin
- 24 Jul 2013
- Forum: MultiCharts
- Topic: Quote Manager requests tick data even when not required [SOLVED]
- Replies: 11
- Views: 6720
Re: Quote Manager requests tick data even when not required [SOLVED]
Hello Henry, 1) MC version is 8.7 Build 7472 2) TWS version is 932.4 standalone The issue seems not being connected to a certain MC or TWS version and occurs on older versions of MC and older and newer versions of TWS as well. 3) I can reproduce it on a constantly basis. Even when I create a new wo...
- 24 Jul 2013
- Forum: MultiCharts
- Topic: IB Combo Order
- Replies: 8
- Views: 4800
Re: IB Combo Order
Hello. It has been more than 2 years now. Does any latest version of MC support IB Combo orders yet? This could be done using external IB API dll function . Not a free solution, nor an easy one, but it could be done. I'm using these dll with Excel, but they could be use within MC to. Look for Trade...
- 19 Jul 2013
- Forum: MultiCharts
- Topic: IB: EURUSD / IDEALPRO Chart not updating
- Replies: 25
- Views: 9936
Re: IB: EURUSD / IDEALPRO Chart not updating
No, there is obviously some serious problem with the IB Data Source Adapter in 7409! I Have also inconsistent Chart Data. The Chart is lagging (or not showing the latest tick). See attached. Please check! lantama Picture mean nothing for me.... I can't see where is the problem originate Best bet is...
- 18 Jul 2013
- Forum: MultiCharts
- Topic: Arrow Style seem not OK
- Replies: 4
- Views: 1816
Re: Arrow Style seem not OK
Hello I want to display slim arrow's on my chart. Every value set on ARW_SetStyle return the same appearance. Martin Value1 = arw_new_s(Date,Time_s, High+.0004,Arrowdown); Value1 = arw_setcolor(value1, Blue); Value1 = arw_setStyle(value1, 0); Should I answer this question? hehe! After 45 minutes tu...
- 18 Jul 2013
- Forum: MultiCharts
- Topic: Arrow Style seem not OK
- Replies: 4
- Views: 1816
Arrow Style seem not OK
Hello
I want to display slim arrow's on my chart. Every value set on ARW_SetStyle return the same appearance.
Martin
I want to display slim arrow's on my chart. Every value set on ARW_SetStyle return the same appearance.
Martin
Code: Select all
Value1 = arw_new_s(Date,Time_s, High+.0004,Arrowdown);
Value1 = arw_setcolor(value1, Blue);
Value1 = arw_setStyle(value1, 0);
- 15 Jul 2013
- Forum: MultiCharts
- Topic: IB: EURUSD / IDEALPRO Chart not updating
- Replies: 25
- Views: 9936
Re: IB: EURUSD / IDEALPRO Chart not updating
Hi, my charts of the EURUSD / IDEALPRO from IB are not updating since the update to 8.7 (7409). History is loading, Quotemanager is collecting, but somehow the charts are not updating with new ticks (last, bid, 1 minute, ticks.....) . This is weird, as other symbols are working fine. Any idea what ...
- 14 Jul 2013
- Forum: MultiCharts
- Topic: Playback, Step forward; Is there a hot key [SOLVED]
- Replies: 3
- Views: 5092
Re: Playback, Step forward; Is there a hot key [SOLVED]
Henry,Hello Martin,
We are going to add keyboard shortcuts for playback controls in MultiCharts 8.7 beta 2.
Is the hotkey for playback as been implemented? I don't found any list of hotkey applicable to playback tool.
Martin
- 13 Jul 2013
- Forum: MultiCharts
- Topic: Multicharts Technical Features
- Replies: 4
- Views: 2835
Re: Multicharts Technical Features
take care about High[1] and Low[1] if you use (like i think) 'Update on every tick' on indicator properties folder of your indicator. 'High 1 bar ago' will do solve your code ;) Thank you Smoky.... I did modify my code. Since the problem was intermittent, usage will tell me f it resolve it. Would y...
- 12 Jul 2013
- Forum: MultiCharts
- Topic: Multicharts Technical Features
- Replies: 4
- Views: 2835
Re: Multicharts Technical Features
Hello, I am new to Multicharts. Please point me in the right direction if possible On a 200 tick & daily chart is it possible to: Have the daily highs and lows coloured in every day. Have the opening range highlighted for each trading session (*3 in a 24 hour period) On the Market scanner screen Is...
- 11 Jul 2013
- Forum: MultiCharts
- Topic: How to read / write a single line in a file
- Replies: 2
- Views: 3704
How to read / write a single line in a file
Hello
I'm looking to replace the Global Variable String that I'm using in Excel because it cause me some problem. To do so, I want to look at working with a file to trasmit info between MC and Excel
Anyone as an example of code use to write and read a single line to a file
Martin
I'm looking to replace the Global Variable String that I'm using in Excel because it cause me some problem. To do so, I want to look at working with a file to trasmit info between MC and Excel
Anyone as an example of code use to write and read a single line to a file
Martin
- 11 Jul 2013
- Forum: MultiCharts
- Topic: Using Global Variable with Excel
- Replies: 1
- Views: 2274
Re: Using Global Variable with Excel
I found this information, but not to resolve it It seem that Excel use "BSTR" format for it's string while C++ "LSTR". Both are different and it may explain why I got problem. Still, I don't know how to resolve that yet Martin Hi All, Thanks everyone for the replies. I've been reading some informati...
- 11 Jul 2013
- Forum: MultiCharts
- Topic: Using Global Variable with Excel
- Replies: 1
- Views: 2274
Using Global Variable with Excel
Hello I'm looking for an explanation about why using Global Variable string in Excel is causing erroneous data when it is modified Excel code. Is it the proper way to declare the function? When using GVSetNamedString ("String1", "A test String", If I modify the string, I got erroneous data. The prev...
- 11 Jul 2013
- Forum: MultiCharts
- Topic: ADE-- String and Excel questions
- Replies: 0
- Views: 1565
ADE-- String and Excel questions
Hello
Having a problem with the Global Variable string in Excel, I'm looking for a new solution
- Is it possible to use ADE and string?
- Is then ADE collection as available to be use with Excel
- Where could I get the ADE collection
Martin
Having a problem with the Global Variable string in Excel, I'm looking for a new solution
- Is it possible to use ADE and string?
- Is then ADE collection as available to be use with Excel
- Where could I get the ADE collection
Martin
- 11 Jul 2013
- Forum: MultiCharts
- Topic: Global Variable use in Excel: Strange behavior
- Replies: 0
- Views: 1534
Global Variable use in Excel: Strange behavior
Hello I use Global Variable to pass information between Excel and MC My problem is with the Excel version, when I want to erase a string from a GV_NamedString using a nil string ("") , only the first character is erased EX in Excel ac = GVSetNamedString ("GVTEST1", "This is a test") Astring = GVGetN...
- 01 Jul 2013
- Forum: MultiCharts
- Topic: Elexcel fail to send data to Excel after Excel file failure
- Replies: 0
- Views: 1551
Elexcel fail to send data to Excel after Excel file failure
Hello
I had some problem with an Excel file opening. Since the success of the re-opening the Excel file, Elexcel stop being able to write data to Excel.
Is there a complement or a patch that need to be anable in Excel so both can talk again.
Any help appreciated
Martin
I had some problem with an Excel file opening. Since the success of the re-opening the Excel file, Elexcel stop being able to write data to Excel.
Is there a complement or a patch that need to be anable in Excel so both can talk again.
Any help appreciated
Martin
- 19 Jun 2013
- Forum: MultiCharts
- Topic: Creating an erasable trend line: Possible? [SOLVED]
- Replies: 2
- Views: 4050
Creating an erasable trend line: Possible? [SOLVED]
Hello Is it possible to code the creation of a new trend line that is not "attached" to the indicator that has created it. Meaning, I could select a trend line created by the indicator, erased it without having my indicator closed after I killed the line Actually, when I remove a line, my indicator ...
- 18 Jun 2013
- Forum: MultiCharts
- Topic: Vote for my request: Adding an alarm option on rectangle
- Replies: 0
- Views: 1402
Vote for my request: Adding an alarm option on rectangle
Hello I did post a request to add an option to set an alarm for a rectangle that we draw on a chart https://www.multicharts.com/pm/viewissue.php?issue_no=MC-1363 Actually, we could set an alarm for a line, but not for a rectangle shape. I use it to delimit region of interest and I would like to trig...
- 10 Jun 2013
- Forum: MultiCharts
- Topic: Problem While....Loop
- Replies: 13
- Views: 3266
Re: Problem While....Loop
HI Martin, Thank for your email. I did change it to manual input from auto-detection. My problem has not resolved. I guess the fundamental question is associated to the logic of multicharts. It seems to me that multicharts ( version 8.5) cannot deal with something is changing. As advised by the sup...
- 08 Jun 2013
- Forum: MultiCharts
- Topic: Problem While....Loop
- Replies: 13
- Views: 3266
Re: Problem While....Loop
HI TJ.. THks I am sure my coding is correct because all dots was at the correct place I expected. The only thing I have been confused that is the first dot placement. It should be occurred at somewhere earlier than Aug 2006 because My data was started as of Dec 2003. Anyway , thks a lot Kam Kam, is...
- 01 Jun 2013
- Forum: MultiCharts
- Topic: What is ADE: "All data everywhere"
- Replies: 1
- Views: 2680
What is ADE: "All data everywhere"
Hello I read an article about an indicator that was using ADE in TS. Did try to find info on the wiki, nothing. It seem to be similar usage as the global variable. If so, is it better? Why and when would it be OK to use it. I do use a lot global variable, mainly named string. I got a memory leak som...
- 29 May 2013
- Forum: MultiCharts
- Topic: feature request - reversal bars
- Replies: 3
- Views: 2324
- 23 May 2013
- Forum: MultiCharts
- Topic: Arw_New_self_DT(date,114843257,1.2895,false); Not compile [SOLVED]
- Replies: 5
- Views: 3223
Re: Arw_New_self_DT(date,114843257,1.2895,false); Not compil [SOLVED]
TJ, Amouseclick will be false My understanding was that once an arrow was draw, it will be kept there forever or until manually kill from the chart. I realize now that it should be re-enabled on every pass. I did try to put the draw arrow function outside of the loop, but it was slowing down my char...
- 23 May 2013
- Forum: MultiCharts
- Topic: Arw_New_self_DT(date,114843257,1.2895,false); Not compile [SOLVED]
- Replies: 5
- Views: 3223
Re: Arw_New_self_DT(date,114843257,1.2895,false); Not compil [SOLVED]
Hi Martin, doesn't _DT mean that the reserved uses a datetime input? Which would mean you have one input for time and date only. Regards, ABC Good day Sir Problem half way resolved. Finally, I'm able to show an arrow at the position that I "Shift click "on the chart. Only problem, the arrow disappe...
- 23 May 2013
- Forum: MultiCharts
- Topic: Arw_New_self_DT(date,114843257,1.2895,false); Not compile [SOLVED]
- Replies: 5
- Views: 3223
Arw_New_self_DT(date,114843257,1.2895,false); Not compile [SOLVED]
Hello The new function Arw_New_self_DT(date,114843257,1.2895,false); value1 = Arw_New_self_DT(date,114843257,1.2895,false); Error given is Compiled with error(s): ------ Invalid number of parameters. 3 parameter(s) expected errLine 57, errColumn 15, errLineEnd 57, errColumnEnd 15 causal study: (Func...
- 23 May 2013
- Forum: MultiCharts
- Topic: Setting time precision [SOLVED]
- Replies: 3
- Views: 2333
Re: Setting time precision [SOLVED]
Hello Martin, There is no way to reduce the number of digits. Milliseconds are displayed only on tick charts. We believe that this information is important for traders. Depend for each of us. For me it is a distraction. My eyes, not trained. Time is important but in the context of the period of the...
- 23 May 2013
- Forum: MultiCharts
- Topic: Is there a Characters replacement in a string function?
- Replies: 2
- Views: 2134
Is there a Characters replacement in a string function?
Hello
Is there a function to replace characters in a string.
I need to remove ":" and the "." in a time string like 06:30:37.957
Martin
Is there a function to replace characters in a string.
I need to remove ":" and the "." in a time string like 06:30:37.957
Martin
- 23 May 2013
- Forum: MultiCharts
- Topic: Using MouseClick event to show arrow:
- Replies: 3
- Views: 2270
Re: Using MouseClick event to show arrow:
"TJ" arw_new_dt arw_new_self_dt arw_setlocation_dt arw_gettime_dt We don't seem to have the "_DT" for clicktime = datetime2eltime_dt (vclickdatetime); It won't compile - The capture is done using the vclickdatetime = MouseClickDateTime - The time is then read from the value using : clicktime = date...
- 23 May 2013
- Forum: MultiCharts
- Topic: Using MouseClick event to show arrow:
- Replies: 3
- Views: 2270
Using MouseClick event to show arrow:
Hello using MC beta 7 and the time precision is to the millisecond. I'm using Tick Chart. Where is my error I want to use the mouse click event to show an arrow. From my code, arrow is not showed. I suspect because the time precision is not the millisecond. Martin if MouseClickshiftPressed then begi...
- 23 May 2013
- Forum: MultiCharts
- Topic: Setting time precision [SOLVED]
- Replies: 3
- Views: 2333
Setting time precision [SOLVED]
Hello
Is it possible to set the time precision to the second instead ot the milisecond on the chart?
I don't really need the last digit for the moment.
Martin
Is it possible to set the time precision to the second instead ot the milisecond on the chart?
I don't really need the last digit for the moment.
Martin
- 22 May 2013
- Forum: User Contributed Studies and Indicator Library
- Topic: Targets and stop with mouseclick
- Replies: 7
- Views: 4692
Re: Targets and stop with mouseclick
OK OK . I see said the blind menCode: Select all
begin
//Begin tracking after crtl + mouseclick
If MouseClickCtrlPressed then
BEGIN
StartTracking = 1;
print( "MouseClick");
END;
end;
- 22 May 2013
- Forum: User Contributed Studies and Indicator Library
- Topic: Targets and stop with mouseclick
- Replies: 7
- Views: 4692
Re: Targets and stop with mouseclick: Function bug?
Hello SP Thanks for the code I did try it and was not lucky to have it work yet After the line 58 of your code, I added a print ("Mouse Click");. To my surprise, the print out is done even when no mouse click is done begin //Begin tracking after crtl + mouseclick If MouseClickCtrlPressed then Start...
- 22 May 2013
- Forum: User Contributed Studies and Indicator Library
- Topic: Targets and stop with mouseclick
- Replies: 7
- Views: 4692
Re: Targets and stop with mouseclick: Function bug?
This code shows how to use the new mouseclick function to plot lines on the chart. - If you use "crtl + mouseclick" the indicator starts plotting the entry based on the last close, 2 long targets and 1 stop based on ticks. - If you click above the last close it plots targets for short entry, below ...
- 22 May 2013
- Forum: MultiCharts
- Topic: MULTICHARTS 8.7 BETA 1
- Replies: 51
- Views: 24857
Re: MULTICHARTS 8.7 BETA 1 / Rectangle date & time
Hello Andrew I installed the latest beta version to resolve the date & time of a rectagle that was not respected. It work, but another strange behavior now occur Draw a rectangle up to a space further in time than the last bar on a chart. The rectangle will be draw, A next bar comme along, the recta...
- 09 May 2013
- Forum: MultiCharts
- Topic: Equidistant channel: Is there a function to code for it?
- Replies: 1
- Views: 1536
Equidistant channel: Is there a function to code for it?
Hello
Is there a function to draw equidistant channel on a chart using the code?
Martin
Is there a function to draw equidistant channel on a chart using the code?
Martin
- 08 May 2013
- Forum: MultiCharts .NET
- Topic: IChartCustomDrawer Interface
- Replies: 13
- Views: 5080
Re: IChartCustomDrawer Interface
HelloWe will provide you with the examples shortly.
An old post, Is an example of code has been published?
Martin
- 08 May 2013
- Forum: MultiCharts
- Topic: TrendLine created, not displayed [SOLVED]
- Replies: 12
- Views: 4233
Re: TrendLine created, not displayed: Resolved??? [SOLVED]
Hello Jonathan / John .... I did not known that the Begin And End as to be in a special order Martin There is no rule to set the Begin and End in a special order, you only have to apply them in the logic you want. Computer is dumb; it only does things the way you instruct them to do. https://www.mu...
- 08 May 2013
- Forum: MultiCharts
- Topic: TrendLine created, not displayed [SOLVED]
- Replies: 12
- Views: 4233
Re: TrendLine created, not displayed: Resolved??? [SOLVED]
Hello Jonathan / John I did reolved the problem, but for a strange reason. I did use John suggestion and I looked at the trendline format. Strangely, the format for the trendline was from a start from the actual, calculated from the code, High and time, but the end was from the previous value.. To m...
- 08 May 2013
- Forum: MultiCharts
- Topic: TrendLine created, not displayed [SOLVED]
- Replies: 12
- Views: 4233
Re: TrendLine created, not displayed [SOLVED]
Hello I want to draw horizontal trendline to show the previous Day High & Day Low on my 250 Ticks chart.. The trend line does not appear on my chart and I don't know why ... Martin Try: tl_setbegin_s TL_SetEnd_s Thanks TJ, it resolved in part the problem Now, A trendline is visible, but not in an h...
- 07 May 2013
- Forum: MultiCharts
- Topic: TrendLine created, not displayed [SOLVED]
- Replies: 12
- Views: 4233
Re: TrendLine created, not displayed [SOLVED]
I have on rare occasion had trend lines not show. I check the location of the date and time in the properties for the line but they simply are not showing. I check the color and they should be visible but they are not. It is pretty rare (maybe once every 3 months). 99.999% of the time there is no p...
- 07 May 2013
- Forum: MultiCharts
- Topic: TrendLine created, not displayed [SOLVED]
- Replies: 12
- Views: 4233
TrendLine created, not displayed [SOLVED]
Hello I want to draw horizontal trendline to show the previous Day High & Day Low on my 250 Ticks chart.. The trend line does not appear on my chart and I don't know why A trendline number is created and is re-use everytime. One Line number per High and one per low. The value of the last day High an...
- 30 Apr 2013
- Forum: MultiCharts
- Topic: Multi Charts disposition: Could we do that [SOLVED]
- Replies: 3
- Views: 2403
Re: Multi Charts disposition: Could we do that [SOLVED]
Wow, I got a fast answer
Thank's TJ, Arnie
I never worked with the scanner, so I'm not familiar . But for sure, I know what to look for
Martin
Thank's TJ, Arnie
I never worked with the scanner, so I'm not familiar . But for sure, I know what to look for
Martin
- 30 Apr 2013
- Forum: MultiCharts
- Topic: Multi Charts disposition: Could we do that [SOLVED]
- Replies: 3
- Views: 2403
Multi Charts disposition: Could we do that [SOLVED]
Hello I was listening to a webminar. The instructor was working with TS. I took a snap picture of his workspace. On the left a scanner window with all the instruments that he is following. All the charts displayed on the worskpace is is of the same instrument selected on the scanner. From weekly to ...
- 24 Apr 2013
- Forum: MultiCharts
- Topic: What is the function to get the price of a pivot low [SOLVED]
- Replies: 2
- Views: 1452
Re: What is the function to get the price of a pivot low [SOLVED]
Hello I'm may be tired, but I just can't remenber what is the function that I used before to get the price of a pivot low ( or high) Martin :) Look under function name that starts with "pivot"; there are a few with various capabilities. Thank you TJ! Did not find any good info on MC site. Did find ...
- 23 Apr 2013
- Forum: MultiCharts
- Topic: What is the function to get the price of a pivot low [SOLVED]
- Replies: 2
- Views: 1452
What is the function to get the price of a pivot low [SOLVED]
Hello
I'm may be tired, but I just can't remenber what is the function that I used before to get the price of a pivot low ( or high)
Martin
I'm may be tired, but I just can't remenber what is the function that I used before to get the price of a pivot low ( or high)
Martin
- 23 Apr 2013
- Forum: MultiCharts
- Topic: Stop order on same bar as entry (How to) [SOLVED]
- Replies: 7
- Views: 4031
Re: Stop order on same bar as entry (How to) [SOLVED]
Great thanks. Alternatively if used the function under "strategy properties...Auto Trading": Recalculate on Broker Events ....... Market position change....order filled. Would this allow me to create a stop immediately after a fill (on the same bar) without the need for IOG code? I'm really not an ...
- 23 Apr 2013
- Forum: MultiCharts
- Topic: Stop order on same bar as entry (How to) [SOLVED]
- Replies: 7
- Views: 4031
Re: Stop order on same bar as entry (How to) [SOLVED]
Use IntraBarOrderGeneration IOG This will allow order to be generated while the bar is in completion if your condition is true. Just make sure that you add condition so the same entry order is not repeated on the same bar. [IntrabarOrderGeneration=true] If Marketposition=-1 then begin sstop=Minlist(...
- 20 Apr 2013
- Forum: MultiCharts
- Topic: Playback, Step forward; Is there a hot key [SOLVED]
- Replies: 3
- Views: 5092
Playback, Step forward; Is there a hot key [SOLVED]
Hello
I want to study some charts using the step back / step forward button on the task bar. Is there a hotkey to control the step. I did look in the hotkeys list and I did not see one
Martin
I want to study some charts using the step back / step forward button on the task bar. Is there a hotkey to control the step. I did look in the hotkeys list and I did not see one
Martin
- 19 Apr 2013
- Forum: MultiCharts
- Topic: Any way to deactivate click to select?
- Replies: 6
- Views: 2656
Re: Any way to deactivate click to select?
Sorry, i miss read your problem I tough that you wanted to use the mouse click function to get data from a bar. Probably because I had a similar problem when I worked with this function. But my easy solution for your problem could be the same. Place a 2' chart with the same instrument and scale and ...
- 19 Apr 2013
- Forum: MultiCharts
- Topic: Any way to deactivate click to select?
- Replies: 6
- Views: 2656
Re: Any way to deactivate click to select?
Yes, I have tried that. It does not seem to make much difference. My indicator uses High/Low bars to paint channels (eg a 90 min channel) in the background across most or all of the screen. Any click in that area (which is frequently the whole screen) and the indicator tends to be selected. Again, ...
- 18 Apr 2013
- Forum: MultiCharts
- Topic: Any way to deactivate click to select?
- Replies: 6
- Views: 2656
Re: Any way to deactivate click to select?
Hello trader39 Publishing your indicator may help us to help uo I had this problem with some of my indicator that was create to write data on the Data Window only. For this particular Indicator, I need to hide it ( in the format). Not doing so, I got the same problem as you I never investigate but I...
- 12 Apr 2013
- Forum: MultiCharts
- Topic: Attaching data window to the left
- Replies: 2
- Views: 1007
Re: Attaching data window to the left
Hello Amateur question.... In one of my workspace, the data window is attached to the right of the chart. I don't succeed to have it attached to the left Weird..... :) Martin Just drag it from one side to the other. Grab the title window and drag it till the left toolbars. As soon the mouse goes on...
- 12 Apr 2013
- Forum: MultiCharts
- Topic: Attaching data window to the left
- Replies: 2
- Views: 1007
Attaching data window to the left
Hello
Amateur question....
In one of my workspace, the data window is attached to the right of the chart. I don't succeed to have it attached to the left
Weird.....
Martin
Amateur question....
In one of my workspace, the data window is attached to the right of the chart. I don't succeed to have it attached to the left
Weird.....
Martin
- 11 Apr 2013
- Forum: MultiCharts .NET
- Topic: Global Variable & Elecxel.dll for MC.Net
- Replies: 3
- Views: 2105
Re: Global Variable & Elecxel.dll for MC.Net
Thank you HenryHello Martin,
GlobalVariables for all MultiCharts versions including MultiCharts .Net
*Added to MC .Net FAQ
Any info about the Elexcel.dll? Using MC.net, is it possible to use dll that are available in the regular version?
Martin
- 11 Apr 2013
- Forum: MultiCharts .NET
- Topic: Global Variable & Elecxel.dll for MC.Net
- Replies: 3
- Views: 2105
Global Variable & Elecxel.dll for MC.Net
Hello
I just installed the MC.net Starter version.
Is the global variable and Elexcel.dll are available for this version? I don't see the global variable in the available function
Martin
I just installed the MC.net Starter version.
Is the global variable and Elexcel.dll are available for this version? I don't see the global variable in the available function
Martin
- 24 Mar 2013
- Forum: User Contributed Studies and Indicator Library
- Topic: How to get ELcollections to read a 3 field CSV file.
- Replies: 10
- Views: 11478
Re: How to get ELcollections to read a 3 field CSV file.
Did resolve my problem
There is a function call:
ListS.Count(ListS_ID) that return the count of how many string line in the list.
recordNumbermax = ListS.Count(ListS_ID) ; When reading my file, I make sure that my ID number does not go further than this value
Martin
There is a function call:
ListS.Count(ListS_ID) that return the count of how many string line in the list.
recordNumbermax = ListS.Count(ListS_ID) ; When reading my file, I make sure that my ID number does not go further than this value
Martin
- 24 Mar 2013
- Forum: User Contributed Studies and Indicator Library
- Topic: How to get ELcollections to read a 3 field CSV file.
- Replies: 10
- Views: 11478
Re: How to get ELcollections to read a 3 field CSV file.
I was having problems figuring this out at the end of the day but I got it to work after a good nights sleep with a rested gray matter. The correct code is below. The command ListC.ReadFile(ListC_ID, "C:\EL_CollectionsTestData.txt"); is used to read the following file in. C:\EL_CollectionsTestData....
- 23 Mar 2013
- Forum: MultiCharts
- Topic: Using ElCollection to read CSV file: Error
- Replies: 4
- Views: 2206
Re: Using ElCollection to read CSV file: Error
Martin, ListC.Readfile is not a standard MC function, but a function from the ELCollections set. So you probably just need to place the ELCollections.dll in the MC program folder and everything should work fine. Regards, ABC Good afternoon Chris I did install the dll in MC folder and I'm receiving ...
- 22 Mar 2013
- Forum: MultiCharts
- Topic: Using ElCollection to read CSV file: Error
- Replies: 4
- Views: 2206
Using ElCollection to read CSV file: Error
Hello I'm trying to use ElCollection dll to read a CSV file. The code compiled OK, but when it is run, I received an error message :Can't find dll Elcollection.dll Since the code did compile, how can I receive an error message that MC can't find the ElCollections.dll since << ListC.Readfile >> is a ...
- 22 Mar 2013
- Forum: MultiCharts
- Topic: The simplest thing doesn't seem to work, can someone help? [SOLVED]
- Replies: 3
- Views: 1949
Re: The simplest thing doesn't seem to work, can someone hel [SOLVED]
Hey Mips, thanks ALOT . I knew I was missing some key concept when even the simplest of functions would not retain their values. I've been thru the EasyLanguage manual, don't recall seeing this explicitly stated anywhere, and it's such a foundational concept for all other languages that it's easy t...
- 20 Mar 2013
- Forum: MultiCharts
- Topic: Elexcel, Global variable: Memory overload problem
- Replies: 7
- Views: 2631
Re: Elexcel, Global variable: Memory overload problem
It would be really cool if someone could show how to write a very simple DLL using Visual Studio that is compatible with MultiCharts, either on a 32-bit or 64-bit basis. I have done some experimenting with it, but quite honestly, I gave up because it's so hard to debug problems. The DLL will compil...
- 19 Mar 2013
- Forum: MultiCharts
- Topic: Elexcel, Global variable: Memory overload problem
- Replies: 7
- Views: 2631
Re: Elexcel, Global variable: Memory overload problem
Martin, unfortunately there is nothing we can help with without the source code of the dll. I suppose that you have the source code for the global variable, since it is an MC integral part. Any known problem with memory usage using it? The other one is Elexcel, an open source dll to communicate wit...
- 18 Mar 2013
- Forum: MultiCharts
- Topic: Being able to hide/show indicators. [SOLVED]
- Replies: 2
- Views: 2027
Re: Being able to hide/show indicators. [SOLVED]
I have created a feature request to add the ability to hide/show indicators on the screen without having to go through the process of physically deleting and inserting them. I am thinking that a user would be able to click a drop down icon symbol to that of changing a symbol or timeframe from the s...
- 15 Mar 2013
- Forum: MultiCharts
- Topic: Elexcel, Global variable: Memory overload problem
- Replies: 7
- Views: 2631
Re: Elexcel, Global variable: Memory overload problem
Hello Martin, We can give you a hand in this situation in case you have the source code of the dll. Hello Henry Thanks for the offer, but I don't have the source code for these. I'm using ElXcel.dll and the regular Global variable from MC. All running under MC 32. As mentioned. a workspace is loade...
- 13 Mar 2013
- Forum: MultiCharts FAQ
- Topic: [Advanced Topic] Programming DLL
- Replies: 37
- Views: 43715
Re: [Advanced Topic] Programming DLL
CsharpStudent. Look on this post from user TJ: viewtopic.php?f=16&t=10094#p48319Martin,
Thanx for the pointer. Where would I find this ElCollection.dll , its docs/usage steps etc.
Best
Martin
- 13 Mar 2013
- Forum: MultiCharts FAQ
- Topic: [Advanced Topic] Programming DLL
- Replies: 37
- Views: 43715
Re: [Advanced Topic] Programming DLL
Hello all. I have tried to follow the very helpful responses above on how to build a dll for MC. I would REEEEALLLY be thankfyl if anyone could help me get the following accomplished: Objective of the DLL - Send from PowerLanguage code, date and time and read an ASCII file and pass the value back t...
- 11 Mar 2013
- Forum: MultiCharts
- Topic: Please help me out of MC8.5
- Replies: 4
- Views: 1551
Re: Please help me out of MC8.5
Hi, Is there a way of getting free from MC8.5 and go back to 8.0 ? I tried to install 8.0 but that was not possible once you've installed a newer version... Any ideas are appreciated as MC8.5 is making it impossible for me to trade. Thanks, Lars Hello Lars Could you explain what is causing a proble...
- 07 Mar 2013
- Forum: MultiCharts .NET
- Topic: Rectangle [SOLVED]
- Replies: 6
- Views: 3690
Re: Rectangle [SOLVED]
Henry, is it available for the regular MC or only for MC.net?Hello Zoli,
You can use IChartCustomDrawer Interface to draw whatever you like for ex. recatangles, triangles.
I never saw that function
Martin
- 07 Mar 2013
- Forum: MultiCharts
- Topic: Is there a Last bar of the day or session function? [SOLVED]
- Replies: 1
- Views: 1244
Is there a Last bar of the day or session function? [SOLVED]
Hello
I think I have worked with a function that returned true or false if a bar is the last of the day. or session. But, I don't recall what it is
Martin
I think I have worked with a function that returned true or false if a bar is the last of the day. or session. But, I don't recall what it is
Martin
- 05 Mar 2013
- Forum: MultiCharts
- Topic: MULTICHARTS 8.5 RELEASE
- Replies: 186
- Views: 76855
Re: MULTICHARTS 8.5 RELEASE
Hello Martin, I use MC8.5 64 bit latest release version and have 16gb of RAM. Didn't try this with releases before 8.5 or beta 8.5. In windows taskmanager, quotemanager is not taking much memory (max 8.000kb) I am not backtesting, but scrolling through the data in quotemanager. * select a symbol, r...
- 04 Mar 2013
- Forum: MultiCharts
- Topic: MULTICHARTS 8.5 RELEASE
- Replies: 186
- Views: 76855
Re: MULTICHARTS 8.5 RELEASE
I have a issue with the quotemanager. When scrolling trough data of a symbol (edit data..screen), quotemanager will freeze. And it will scramble your display (I have multimonitor setup). It also will change the behaviour of your keyboard. For example the capslock is locked to status on or special c...
- 03 Mar 2013
- Forum: MultiCharts
- Topic: MULTICHARTS 8.5 RELEASE
- Replies: 186
- Views: 76855
Resolved: MULTICHARTS 8.5 RELEASE
Links to install the latest version: Wrong Internet browser is opening up Is there another link to install the latest version. When I use the one from my Toolbar //Help //Check & update, Internet Explorer is opening up for the download. My default browser is Chrome and I want to stick with it. Under...
- 01 Mar 2013
- Forum: MultiCharts
- Topic: Elexcel, Global variable: Memory overload problem
- Replies: 7
- Views: 2631
Elexcel, Global variable: Memory overload problem
Hello The memory usage of a workspace is always increasing up to a point where I receive message of memory overloading from MC when the 1GB target is reached. It look like a memory leak from my indicator. This workspace as an indicator that is used to send 8 strings of data to Excel. The strings are...
- 26 Feb 2013
- Forum: MultiCharts
- Topic: Rules for IB Ideal Pro Forex trading [SOLVED]
- Replies: 11
- Views: 6673
Re: Rules for IB Ideal Pro Forex trading [SOLVED]
OCO Group working correctly ? To my knowledge all OCO orders at IB should have the same Base ID, with indexes incrementes for associated stop and / or profit target. This is described as well in https://www.multicharts.com/trading-software/index.php/Chart_Trading in the last sentence in OCO-Orders ...
- 24 Feb 2013
- Forum: MultiCharts
- Topic: Extract price data at specific time
- Replies: 4
- Views: 1991
Re: Extract price data at specific time
Hi TJ, Thanks for your reply. In principle, this should work, but since I generally base my charts on exchange time instead of computer time, I would prefer if there would be something like "CURRENT_EXCHANGE_TIME", but I think there isn't? Of course you can do the math and convert the time, but sin...
- 18 Feb 2013
- Forum: MultiCharts
- Topic: Creating a set of data to be displayed as a candelstick? [SOLVED]
- Replies: 1
- Views: 1025
Creating a set of data to be displayed as a candelstick? [SOLVED]
Hello
Is it possible to create a set of data and us it to be displayed as a candlestick?
I just looked at a webminar from Fulcrum Trader where he was using Delta Volume displayed as a candlestick
Maybe this type of indicator already exist, just never saw it before.
A good day to all
Martin
Is it possible to create a set of data and us it to be displayed as a candlestick?
I just looked at a webminar from Fulcrum Trader where he was using Delta Volume displayed as a candlestick
Maybe this type of indicator already exist, just never saw it before.
A good day to all
Martin
- 14 Feb 2013
- Forum: MultiCharts
- Topic: Line Brake Charts... No looking good
- Replies: 1
- Views: 1080
Line Brake Charts... No looking good
Hello I want to add a line brake chart to add another view of a same instrument on my workspace. I know I have done it in the past, but for whatever reason, the chart doesn't look completed. I did try to change my background to see if some bar where hidden , but nothing there. Any info appreciated M...
- 12 Feb 2013
- Forum: MultiCharts
- Topic: Cloring a bar with two color: Is it possible [SOLVED]
- Replies: 1
- Views: 1033
Resolve: Cloring a bar with two color: Is it possible [SOLVED]
I resolved my problem
Just draw two distinctive Plot Plot1, Plot2
Martin
Just draw two distinctive Plot Plot1, Plot2
Martin
- 12 Feb 2013
- Forum: MultiCharts
- Topic: Cloring a bar with two color: Is it possible [SOLVED]
- Replies: 1
- Views: 1033
Cloring a bar with two color: Is it possible [SOLVED]
Hello. Maybe a dummy question, but unresolved for me. I'm looking for a way to color a same bar with 2 color. Is it possible? On a same bar, I want to chart the delta ( Upticks- Downticks) and the total volume. Since plotting only the delta doesn't show the real furious periods where sellers and buy...
- 07 Feb 2013
- Forum: MultiCharts
- Topic: Excel Link.. Send data to Excel /Reactivating an old project [SOLVED]
- Replies: 19
- Views: 5559
Re: Excel Link.. Send data to Excel /Reactivating an old pro [SOLVED]
Thanks MArtin, I think all is right on my pc. I'm going to contact the MC support. It isn't the first time, i have too many problem, MC isn't reliable. MC not reliable ????? Only problem that I may have is when using tick chart or to many indicator in use on a low resolution. I'm not there to defen...
- 07 Feb 2013
- Forum: MultiCharts
- Topic: Excel Link.. Send data to Excel /Reactivating an old project [SOLVED]
- Replies: 19
- Views: 5559
Re: Excel Link.. Send data to Excel /Reactivating an old pro [SOLVED]
Did you succeed once to send data to Excel? If not, then maybe your Excel sheet is not at the proper link address "C:\...\ExcelFile.Xlsm" - If you did succeed then probably that you have more than one Excel instance opened Do Ctrl Alt Del.. You will get the Windows Task Manager. Look under the Proce...
- 07 Feb 2013
- Forum: MultiCharts
- Topic: Excel Link.. Send data to Excel /Reactivating an old project [SOLVED]
- Replies: 19
- Views: 5559
Re: Excel Link.. Send data to Excel /Reactivating an old pro [SOLVED]
Martin, I've just renamed the dll and same problem. Some times i have the error message 50 sometimes not !!!!!!! Did you you find an easy way for using mc with excel ? Best regards. Please post your code section - Did you have the correct "address" of your Excel file EX:" C:myExcelfile\Excelfile.Xl...
- 07 Feb 2013
- Forum: MultiCharts
- Topic: Excel Link.. Send data to Excel /Reactivating an old project [SOLVED]
- Replies: 19
- Views: 5559
Re: Excel Link.. Send data to Excel /Reactivating an old pro [SOLVED]
Hello Young56. As mentionned, problem as been resolved by renaming the dll fileHi,
Any news about this issue ?
Best regards.
Do you have a specific problem?
Martin
- 25 Jan 2013
- Forum: MultiCharts
- Topic: Cumulative delta chart [SOLVED]
- Replies: 2
- Views: 1102
Re: Cumulative delta chart [SOLVED]
Ha!!!Arjfca, is the version of MultiCharts - 8.5 Beta 2?
Neg: I got 8.0 (Build 6163)
Martin
- 25 Jan 2013
- Forum: MultiCharts
- Topic: Cumulative delta chart [SOLVED]
- Replies: 2
- Views: 1102
Cumulative delta chart [SOLVED]
Hello
Maybe a dummy question
I'm trying to see a Cumulative Delta chart, but I don't see this option in my format instrumnet "Chart type". Is it available for Forex instrument?
Anyone could explain me in few word what is a cumulative delta chart.
A good weekend to all.
Martin
Maybe a dummy question
I'm trying to see a Cumulative Delta chart, but I don't see this option in my format instrumnet "Chart type". Is it available for Forex instrument?
Anyone could explain me in few word what is a cumulative delta chart.
A good weekend to all.
Martin
- 24 Jan 2013
- Forum: MultiCharts
- Topic: Vote for a Text to voice function
- Replies: 6
- Views: 1525
Re: Vote for a Text to voice function
Nice work. Thanks for sharing. a small programming tip: When declaring a string variable, use a $ suffix with the name. This will separate the numeric variables from the string variables, and will help you when you need to trace a bug later on. eg: Var: Scale$(""); Very clever. Thanks for the tip M...
- 24 Jan 2013
- Forum: MultiCharts
- Topic: Vote for a Text to voice function
- Replies: 6
- Views: 1525
Re: Vote for a Text to voice function
at the mean time, you can add an alert which gives you a visual report via a pop up window: alert( "Divergence on " + text(barinterval:0:0) + " Chart"); In fact, I did implement it this morning just after having post the request It Show in the alert the chart definition Once begin ClearDebug; scale...
- 24 Jan 2013
- Forum: MultiCharts
- Topic: Vote for a Text to voice function
- Replies: 6
- Views: 1525
Vote for a Text to voice function
Hello I did wrote a new function request to MC Project Manager about adding a new Text to Voice function My goal is to be able to create a descriptive string about an actual setup on a specific chart or instrument and have it send as a voice message to the speaker I got 3 chart opened with 2 instrum...
- 22 Jan 2013
- Forum: MultiCharts
- Topic: Volume Breakdown Functionality (VB) [SOLVED]
- Replies: 12
- Views: 5160
Re: Volume Breakdown Functionality (VB) [SOLVED]
SP,You need a normal range chart as data 1 and insert a second Cumulative Delta chart as data 2 with the same resolution as data 1 and then create an indicator with:
Excuse my ignorance, but what is a cumulative delta chart? Is it available for Forex
Any info appreciated.
Martin
- 18 Jan 2013
- Forum: MultiCharts
- Topic: Coding for MC 64 dll and Microsoft Office: Compiler to use?
- Replies: 1
- Views: 1252
Coding for MC 64 dll and Microsoft Office: Compiler to use?
Hello An un resolved question for me yet: I want to gatter info before sending a request to a coder for a dll. My goal is to switch to MC 64 but before, I need to have a dll that woul enable me to write string of data from MC 64 to Excel 32. Actually, I' m using Elexcel User JoshM did ask a similar ...
- 18 Jan 2013
- Forum: MultiCharts FAQ
- Topic: Learn EasyLanguage from Beginner to Expert, all free
- Replies: 10
- Views: 18643
Re: Learn EasyLanguage from Beginner to Expert, all free
Anyone as the link for the SDK developpment tool. the one given in this post doen't work anymore
MartinTS EasyLanguage Extension Software Development Kit:
http://www.TS.com/Support/Boo ... on_SDK.pdf
- 18 Jan 2013
- Forum: MultiCharts
- Topic: Project Management web pages: Slow Slow Slow... Is it me?
- Replies: 18
- Views: 7702
Project Management web pages: Slow Slow Slow... Is it me?
Hello Every time that I visit your Project Management site I found it very very slow to load up. Is it me? It just remind me the time it took to load up a page with my first Internet phone modem in 1995 : https://www.multicharts.com/pm/ Nota Bene: I did post a request about getting more info from a ...
- 10 Jan 2013
- Forum: MultiCharts
- Topic: Precision displayed not the same for two Instrument indicato
- Replies: 7
- Views: 2009
Re: Precision displayed not the same for two Instrument indi
I post the request...I see your point. Thank you for your suggestion, i forwarded it to our developers. I also recommend you to leave respective feature request.
I don't know why, but your Project Management site is very very slow. More than 3 minutes to loadup the page
Martin
- 10 Jan 2013
- Forum: MultiCharts FAQ
- Topic: [Advanced Topic] Anything Tricky with dates and times
- Replies: 7
- Views: 8215
Re: Anything Tricky with dates and times
Here is a function with a test script that can take any pair of old and new date/time_s and calculate the number of days between or minutes between or seconds between. the test script is below. The test script and the function are included in the zip file. After about 1.5 hours I ran out of time to...
- 08 Jan 2013
- Forum: MultiCharts
- Topic: Lost in time( again..) :) [SOLVED]
- Replies: 8
- Views: 1998
Re: Lost in time( again..) :) [SOLVED]
I have often wanted to simplify this difference calculation with a function. I could not resist spending about 2 hours on it. It is in the FAQ " Anything Tricky with dates and times " thread at post #4 (here is the link). https://www.multicharts.com/discussion/viewtopic.php?f=16&t=10411&p=57641#p57...
- 08 Jan 2013
- Forum: MultiCharts
- Topic: Lost in time( again..) :) [SOLVED]
- Replies: 8
- Views: 1998
Re: Lost in time( again..) :) [SOLVED]
I have often wanted to simplify this difference calculation with a function. I could not resist spending about 2 hours on it. It is in the FAQ " Anything Tricky with dates and times " thread at post #4 (here is the link). https://www.multicharts.com/discussion/viewtopic.php?f=16&t=10411&p=57641#p57...
- 08 Jan 2013
- Forum: MultiCharts
- Topic: Lost in time( again..) :) [SOLVED]
- Replies: 8
- Views: 1998
Re: Lost in time( again..) :) [SOLVED]
ie. if you are using a 24 hr 100 tick chart, and the last bar of the day has only 80 ticks when midnight struck. MultiCharts will close out the bar even though the bar has less than 100 ticks. So what is the time it takes to complete the 1st bar of the day? The simple answer is the TIME_S . TJ, Tru...
- 08 Jan 2013
- Forum: MultiCharts
- Topic: Lost in time( again..) :) [SOLVED]
- Replies: 8
- Views: 1998
Re: Lost in time( again..) :) [SOLVED]
Hello Anyone as the link for the Easylanguage document that is explaining how to do calculation on time. I had read this document few years ago, now , again, I'm lost in time. Did look in the wiki, but still unresolved. Using tick charts, I want to calculate the time spent to create a bar. To do so...
- 08 Jan 2013
- Forum: MultiCharts
- Topic: Lost in time( again..) :) [SOLVED]
- Replies: 8
- Views: 1998
Lost in time( again..) :) [SOLVED]
Hello Anyone as the link for the Easylanguage document that is explaining how to do calculation on time. I had read this document few years ago, now , again, I'm lost in time. Did look in the wiki, but still unresolved. Using tick charts, I want to calculate the time spent to create a bar. To do so,...
- 07 Jan 2013
- Forum: MultiCharts
- Topic: Tick chart filled my SSD disk: Is it plausible? [SOLVED]
- Replies: 7
- Views: 2190
Re: Tick chart filled my SSD disk: Is it plausible? [SOLVED]
OK, I found the key... Will process with the modificationHi Martin,
Please check this path:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\TS Support\MultiCharts\Databases
Martin
- 07 Jan 2013
- Forum: MultiCharts
- Topic: Tick chart filled my SSD disk: Is it plausible? [SOLVED]
- Replies: 7
- Views: 2190
Re: Tick chart filled my SSD disk: Is it plausible? [SOLVED]
You can also follow our wiki guide How to Move MultiCharts Database, Studies and Logs from C Drive Hello Henry /TJ Wiki instruction to move database: I don't find the registry : HKEY_LOCAL_MACHINE\SOFTWARE\TS Support\MultiCharts\Databases\Portfolio My system: Win 7 64. MC 32 Click Windows Start but...
- 05 Jan 2013
- Forum: MultiCharts
- Topic: My Workspaces are empty????
- Replies: 3
- Views: 998
Re: My Workspaces are empty????
Maybe it has to do with your ssd recovery? I hope you have made back ups. Hello Yes, it seem related. Backup , not complete so I did loss some workspaces. I'm lucky if it is the only problem that as been caused. Suggestion to MC: - Verify space on disk before updating a file. If this had been done,...
- 05 Jan 2013
- Forum: MultiCharts
- Topic: My Workspaces are empty????
- Replies: 3
- Views: 998
My Workspaces are empty????
Hello
Strange. This morning I'm re-opening MC and all workspaces that where opened on my last session look empty. Nothing, Nada, Rien.
The workspace name is still valid, it open in an empty or a new workspace.
What could cause that?
Could I recuperate them?
Martin
Strange. This morning I'm re-opening MC and all workspaces that where opened on my last session look empty. Nothing, Nada, Rien.
The workspace name is still valid, it open in an empty or a new workspace.
What could cause that?
Could I recuperate them?
Martin
- 04 Jan 2013
- Forum: MultiCharts
- Topic: Tick chart filled my SSD disk: Is it plausible? [SOLVED]
- Replies: 7
- Views: 2190
Resolve: Tick chart filled my SSD disk: Is it plausible? [SOLVED]
Hello MC not in fault here. My AV Kaspersky had filled all empty space on the drive. Did uninstall the anti-Virus and re-install. My disk as found back all the free space that it had before But same question remain. Can I have my data saved in another disk than the disk where reside the program? Mar...
- 04 Jan 2013
- Forum: MultiCharts
- Topic: Tick chart filled my SSD disk: Is it plausible? [SOLVED]
- Replies: 7
- Views: 2190
Tick chart filled my SSD disk: Is it plausible? [SOLVED]
Hello I received a warning from my PV that my SSD disk is full. MC is install on my c: disk witch the SSD disk. Is it plausible that using tick chart did fill my disk? The last time I had check my disk, I had more than 50% free Now it is full up to the capacity. If so, how can I reduce the space use...
- 04 Jan 2013
- Forum: MultiCharts
- Topic: Tick chart & time; is it possible to mix them
- Replies: 2
- Views: 1001
- 04 Jan 2013
- Forum: MultiCharts
- Topic: Tick chart & time; is it possible to mix them
- Replies: 2
- Views: 1001
Tick chart & time; is it possible to mix them
Hello An idea that I got Tick charts as an equal # of tick per bar Time chart as an equal # time per bar How if we mix a tick chart with a time base chart. Each bar will have a different width, depending of the time that a bar as took to accumulate X numbers of tick. It probably already exist, but I...
- 04 Jan 2013
- Forum: MultiCharts FAQ
- Topic: What compiler
- Replies: 8
- Views: 5242
Re: Recommended compiler to write MC64 dll's?
Thanks for asking it Trader39, I came here to ask the same thing. I read yesterday on BMT that Visual Studio 2010 generates DLLs that aren't compatible with MultiCharts. If Visual Studio, the 'industry standard', doesn't work with MultiCharts, can MC Support provide a list with IDE's for various pr...
- 02 Jan 2013
- Forum: MultiCharts
- Topic: slippage
- Replies: 1
- Views: 1167
Re: slippage
Hello
First, it depend on your broker spread. I don't trade the crude so I got no idea for it
I trade mainly the Forex and my broker is IB. My normal spread is 0.5Pip on Eur.Usd. So for my simulation I will use 1 full pip per side
Good luck
Martin
First, it depend on your broker spread. I don't trade the crude so I got no idea for it
I trade mainly the Forex and my broker is IB. My normal spread is 0.5Pip on Eur.Usd. So for my simulation I will use 1 full pip per side
Good luck
Martin
- 21 Dec 2012
- Forum: MultiCharts
- Topic: Precision displayed not the same for two Instrument indicato
- Replies: 7
- Views: 2009
Re: Precision displayed not the same for two Instrument indi
Arjfca, could you describe a scenario how can this be used in practice? Andrew This function should not be to difficult to implement. All the code is within MC. It could be set like the [Intrabarordergenetrator] option, at the beginning of an indicator code. At the start of the code [Hide] // This ...
- 21 Dec 2012
- Forum: MultiCharts
- Topic: Precision displayed not the same for two Instrument indicato
- Replies: 7
- Views: 2009
Re: Precision displayed not the same for two Instrument indi
Andrew, I did recompiled the indicator and the problem as been resolved As mentioned, both indicators had the same setting. When will MC add the option to set "Hide" to an indicator setup from the code. I need to set all 8 workspaces every time I recompile an indicator that is used by them. I did po...
- 21 Dec 2012
- Forum: MultiCharts
- Topic: Precision displayed not the same for two Instrument indicato
- Replies: 7
- Views: 2009
Precision displayed not the same for two Instrument indicato
A workspace display 2 Instrument: Eur.Usd // Gbp.Usd Both charts use the same Indicators Both instruments set to 5 digit precision Both indicator set to use Instrument scale Precision displayed is not the same for each. I remember that I had this problem before. but can't resolve it now. What could ...
- 12 Dec 2012
- Forum: MultiCharts
- Topic: elexcel.dll on 2 workspace failed.. why? [SOLVED]
- Replies: 4
- Views: 1865
Re: elexcel.dll on 2 workspace failed.. why? [SOLVED]
Hello arjfca, We have tested the .dll it turned out it cannot be used by scripts from 2 separate charts or workspace. But if you launch 2nd instance of MultiCharts, you should be able to use the .dll there Hello Andrew Just to let you know that I did succeed to send data from up to 8 charts in the ...
- 10 Dec 2012
- Forum: MultiCharts
- Topic: Capture certain time periods of an array [SOLVED]
- Replies: 29
- Views: 5060
Re: Capture certain time periods of an array [SOLVED]
For the month,,, not to hard
Look here
https://www.multicharts.com/trading-sof ... .php/Month
You could also use the date of the bar
- From it, Extract the month value
- If Month_date <> Month_date [1] then newmont = true
Martin
Look here
https://www.multicharts.com/trading-sof ... .php/Month
You could also use the date of the bar
- From it, Extract the month value
- If Month_date <> Month_date [1] then newmont = true
Martin
- 10 Dec 2012
- Forum: MultiCharts
- Topic: Vote to allow indicator to be hide from code
- Replies: 0
- Views: 737
Vote to allow indicator to be hide from code
Hello I just posted a request to ask MC to include a new flag or function that would allow an indicator to be hide from a chart from the code. Actually, we can do it using the indicator format and selecting "Hide" That would be nice to set it once for all in the code and never have to Hide it again ...
- 10 Dec 2012
- Forum: MultiCharts
- Topic: Capture certain time periods of an array [SOLVED]
- Replies: 29
- Views: 5060
Re: Capture certain time periods of an array [SOLVED]
A point to note also If you want your variable to be valid all accross the process, you may need to declare them as Intrabarpersist like: IntrabarpersistWeekHigh (0); Other wise, after each new bar, ( day bar per example) the variable WeekHigh will be reset. Your Main question was also about array T...
- 10 Dec 2012
- Forum: MultiCharts
- Topic: Capture certain time periods of an array [SOLVED]
- Replies: 29
- Views: 5060
Re: Capture certain time periods of an array [SOLVED]
Hello Look inside of my code. I use it as a deliminator of week and months on a chart // Week and months deliminator by Martin Theriault 2012/12/10 Inputs: WeekColor (Blue), MonthColor ( darkGreen); Var: LineTime_1 (0), LineNumHigh_Intra (0), LineNumLow_Intra (0), Offset(0), HighIntra (0), LowIntra ...
- 10 Dec 2012
- Forum: MultiCharts
- Topic: Capture certain time periods of an array [SOLVED]
- Replies: 29
- Views: 5060
Re: Capture certain time periods of an array [SOLVED]
Hello Look inside of my code. I use it as a deliminator of week and months on a chart // Week and months deliminator by Martin Theriault 2012/12/10 Inputs: WeekColor (Blue), MonthColor ( darkGreen); Var: LineTime_1 (0), LineNumHigh_Intra (0), LineNumLow_Intra (0), Offset(0), HighIntra (0), LowIntra ...
- 10 Dec 2012
- Forum: MultiCharts
- Topic: Using Elexcel on multi instance.. a concept that work
- Replies: 0
- Views: 1000
Using Elexcel on multi instance.. a concept that work
Hello Anybody when as try to work with Elexcel dll collection to send data to Excel as encounter a problem when trying to use the dll in more than one charts . Inevitably, a failure do occur and the indicator is turned off. I did find a solution to enable me to send data from up to 8 charts ( could ...
- 09 Dec 2012
- Forum: MultiCharts
- Topic: Capture certain time periods of an array [SOLVED]
- Replies: 29
- Views: 5060
Re: Capture certain time periods of an array [SOLVED]
I am not sure how to incorporate the suggestion of martin in my signal. I tried different possibilities. The best I have managed to do, is to get the daily values of the pricerange, average rang and highest rang and calculate an average on that weekly and monthly. But that is different then having ...
- 09 Dec 2012
- Forum: MultiCharts
- Topic: Dummy question: How to declare an area of 8 strings [SOLVED]
- Replies: 1
- Views: 1040
Resolve: Dummy question: How to declare an area of 8 strings [SOLVED]
Resolved: English translation problem I was searching for "AREA" instead of "ARRAY"
Martin
Martin
- 08 Dec 2012
- Forum: MultiCharts
- Topic: Dummy question: How to declare an area of 8 strings [SOLVED]
- Replies: 1
- Views: 1040
Dummy question: How to declare an area of 8 strings [SOLVED]
Hello
I'm probably to tire but I just don't figure how to declare an area of 8 strings. I know I had done it before but ,,, no luck yet
I don't find any info.
Datastring_address [8]
Inistring_Address [8]
Martin
I'm probably to tire but I just don't figure how to declare an area of 8 strings. I know I had done it before but ,,, no luck yet
I don't find any info.
Datastring_address [8]
Inistring_Address [8]
Martin
- 08 Dec 2012
- Forum: MultiCharts
- Topic: How to count how many comma in a CSV string [SOLVED]
- Replies: 2
- Views: 1233
Re: How to count how many comma in a CSV string [SOLVED]
Hello How can i count the number of comma (",") in a a CSV string: Comma separated String Any help appreciated Martin first, find out the length of the string (hint: there is a keyword for that), then create a loop that cycles the length of the string, during the cycle through the loop, check each ...
- 07 Dec 2012
- Forum: MultiCharts
- Topic: How to count how many comma in a CSV string [SOLVED]
- Replies: 2
- Views: 1233
How to count how many comma in a CSV string [SOLVED]
Hello
How can i count the number of comma (",") in a a CSV string: Comma separated String
Any help appreciated
Martin
How can i count the number of comma (",") in a a CSV string: Comma separated String
Any help appreciated
Martin
- 07 Dec 2012
- Forum: MultiCharts
- Topic: Can Drawings appear on more than 1 chart? [SOLVED]
- Replies: 3
- Views: 1677
Re: Can Drawings appear on more than 1 chart? [SOLVED]
Is it possible to have Drawings on one chart appear on another? Basically, I'm marking up support and resistance on one chart and would like it to appear on other charts in the same workspace and instrument. I thought perhaps this would work if i linked the charts but it doesn't seem to. thanks No ...
- 06 Dec 2012
- Forum: MultiCharts
- Topic: Replace N/A bars with last known price?
- Replies: 7
- Views: 2431
Re: Replace N/A bars with last known price?
I'm doing a lot of correlation/spread trading, and use data series overlapping in one chart to spot these. The problem is that in very calm markets, on lower timeframes, there might not be a tick at that certain bar. Multicharts show this as an N/A bar in that case, which messes up the indicators a...
- 05 Dec 2012
- Forum: MultiCharts
- Topic: Capture certain time periods of an array [SOLVED]
- Replies: 29
- Views: 5060
Re: Capture certain time periods of an array [SOLVED]
Hello Here is some code that I have done Month: //MonthBegin // Return true if the bar is the first bar of a new month MonthBegin = False; If (Month(date) <> Month(date[1])) then MonthBegin = true; Week //WeekBegin //Return true if the first bar is the begining of the week //If actual day = Sunday a...
- 04 Dec 2012
- Forum: MultiCharts
- Topic: Remaining ticks on a ticks chart [SOLVED]
- Replies: 3
- Views: 1400
Re: Remaining ticks on a ticks chart [SOLVED]
Hello Using Ticks charts, Is it possible to know how many ticks still need to be process before the end of a bar. I want to set an alarm when the bar is near completion Martin It can easily be done. I think it is within your programming capability. Hello TJ Agree about within my capability. I had n...
- 03 Dec 2012
- Forum: MultiCharts
- Topic: Remaining ticks on a ticks chart [SOLVED]
- Replies: 3
- Views: 1400
Remaining ticks on a ticks chart [SOLVED]
Hello
Using Ticks charts,
Is it possible to know how many ticks still need to be process before the end of a bar. I want to set an alarm when the bar is near completion
Martin
Using Ticks charts,
Is it possible to know how many ticks still need to be process before the end of a bar. I want to set an alarm when the bar is near completion
Martin
- 03 Dec 2012
- Forum: MultiCharts
- Topic: Need help with a small basic system
- Replies: 3
- Views: 1104
Re: Need help with a small basic system
I will send you a private message.Martin
Thank you . Can you please tell me if you know of a good programmer who can code this system for me? and how was your experience with the one you hired and what should i expect to pay
Regards
V
Martin
- 30 Nov 2012
- Forum: MultiCharts
- Topic: elexcel.dll on 2 workspace failed.. why? [SOLVED]
- Replies: 4
- Views: 1865
Re: elexcel.dll on 2 workspace failed.. why? [SOLVED]
Hello arjfca, We have tested the .dll it turned out it cannot be used by scripts from 2 separate charts or workspace. But if you launch 2nd instance of MultiCharts, you should be able to use the .dll there I'm not succeeding in launching elexcel.dll on a 2' MC instance. I'm looking for a solution t...
- 30 Nov 2012
- Forum: MultiCharts
- Topic: elexcel.dll on 2 workspace failed.. why? [SOLVED]
- Replies: 4
- Views: 1865
elexcel.dll on 2 workspace failed.. why? [SOLVED]
Hello A question for genius coder ( at least more than me :) ) Problem using elexcel.dll on more than one worspace I would like to know the cause of failure of the elexcel.dll when I apply it at the same time on two workspaces. - Is there a solution, a Boolean condition to be use ? - Is a new dll ma...
- 29 Nov 2012
- Forum: MultiCharts
- Topic: Need help with a small basic system
- Replies: 3
- Views: 1104
Re: Need help with a small basic system
Folks Wanted help to code te following auto trade system. I am completely new here and dont know much about programming. Would really appreciate your help 1) On a chart , i want to look for 3 consecutive bullish or 2 consecutive bearish bars and enter a trade on the close of the 3rd bar (signal dis...
- 26 Nov 2012
- Forum: MultiCharts
- Topic: String to Speech; Anyone as done some work?
- Replies: 4
- Views: 1184
Re: String to Speech; Anyone as done some work?
Hello arjfca, It may work by means of a 3rd party .dll file that would call the application to play a particular sound file, similar to how it is done in command line MC 8 has some voice message. How are they produce?. Is it pre-recorded message or a text to speech code Any link to a dll collection...
- 25 Nov 2012
- Forum: MultiCharts
- Topic: String to Speech; Anyone as done some work?
- Replies: 4
- Views: 1184
Sending a command line to Win 7 64
Hello
In my quest to find a string to speech, i did found a little application that is called from a command line
<< Saystatic.exe "Hello Martin">> will send a voice message to speaker.
Is the any way in MC to send a command line. I'm using MC 8.0 and Win 7 64 bit
Martin
In my quest to find a string to speech, i did found a little application that is called from a command line
<< Saystatic.exe "Hello Martin">> will send a voice message to speaker.
Is the any way in MC to send a command line. I'm using MC 8.0 and Win 7 64 bit
Martin
- 25 Nov 2012
- Forum: MultiCharts
- Topic: String to Speech; Anyone as done some work?
- Replies: 4
- Views: 1184
String to Speech; Anyone as done some work?
Hello I'm using the sound function to send voice message to speaker. These message are pre- recorded wav file. Work fine, but all message need to be pre-recorded Anyone as worked with a String to Speech dll or function application? That would be interesting to be able to send a string and heard the ...
- 24 Nov 2012
- Forum: MultiCharts
- Topic: Setting data window resolution
- Replies: 1
- Views: 763
Setting data window resolution
Hello Setting data resolution for Data Window Sorry to ask this amateur question. I know I had done it before, but can't do it at the moment. I even think that I had ask the question before and I can't find it either. Same Indicator is applied to 2 Instruments, In one instrument the data window show...
- 24 Nov 2012
- Forum: MultiCharts
- Topic: How to know on witch charts indicator indicator is apply
- Replies: 3
- Views: 1347
Re: How to know on witch charts indicator indicator is apply
Hello I got an indicator that is applied on 2 instruments. A simple test to show an inside bar is done. Mow, I want to add a voice message. I need to know on witch Instrument the indicator as detected an inside bar. Once detected, I save the value in a Global Variable. Actually I got the same messa...
- 24 Nov 2012
- Forum: MultiCharts
- Topic: How to know on witch charts indicator indicator is apply
- Replies: 3
- Views: 1347
How to know on witch charts indicator indicator is apply
Hello I got an indicator that is applied on 2 instruments. A simple test to show an inside bar is done. Mow, I want to add a voice message. I need to know on witch Instrument the indicator as detected an inside bar. Once detected, I save the value in a Global Variable. Actually I got the same messag...
- 21 Nov 2012
- Forum: MultiCharts
- Topic: Manage order on IB server wth TwsSocketClient.dll. Possible?
- Replies: 3
- Views: 1171
Re: Manage order on IB server wth TwsSocketClient.dll. Possi
Hello arjfca, This should be possible not in regular MultiCharts, but in MC .NET. There you can place orders right from signal directly to your broker if you have such script. A last question about this, maybe a dummy one, but I'm green on the subject What is the difference between in the way to us...
- 21 Nov 2012
- Forum: MultiCharts
- Topic: Manage order on IB server wth TwsSocketClient.dll. Possible?
- Replies: 3
- Views: 1171
Manage order on IB server wth TwsSocketClient.dll. Possible?
Hello Just an idea for a coding guru ( witch I'm not). My Broker is IB and TwsSocketClient.dll is the dll that MC seems to use to talk directly to the broker server. Is it possible to use this dll collection directly from coding. The end goal is to make sure that order do reside on IB server, not on...
- 21 Nov 2012
- Forum: MultiCharts
- Topic: Get exist position info when re-active auto-trading
- Replies: 10
- Views: 2394
Re: Get exist position info when re-active auto-trading
so,any in-direct way to store and use multiple separate entries/positions data?for example,ELcollection You may try Global Variable or a text file Value1 = GVSetNamedString ("LastStopPrice",NumToStr(StopPrice,4)); // Set the value BackupStopPrice = NumtoStr(GVGetNamedString("LastStopPrice","9999"))...
- 20 Nov 2012
- Forum: MultiCharts
- Topic: Backtest realistic configuration
- Replies: 1
- Views: 814
Backtest realistic configuration
Hello I did succeed to write a small signal code that return a nice up slope in the profit. I'm trading Forex Eur.Usd Question to get a bit realistic: My broker is IB. How do I set the signal property - How do I set for a transaction fee of 2.5$ per 100K - How do I set a slippage of .5 pip per trade...
- 20 Nov 2012
- Forum: MultiCharts
- Topic: Interogation: Sell All Shares Next Bar At StopLong Stop;
- Replies: 1
- Views: 906
Interogation: Sell All Shares Next Bar At StopLong Stop;
Hello I have not done any signal coding since many month and I'm a bit rusted. I want to set a stop loss price (StopLong) to sell all long position of a given instrument. What will be the result of this code line; Sell All Shares Next Bar At StopLong; a) all open position in the account will be liqu...
- 14 Nov 2012
- Forum: MultiCharts
- Topic: Once..begin sometimes triggered twice [SOLVED]
- Replies: 9
- Views: 3241
Re: Once Begin: Executed twice... Any reason [SOLVED]
Martin, please provide a sample code that can be compiled by all forum members and that will reproduce the problem. If you are using custom functions-please export the study with dependent functions. That is not possible to provide any insight on the code you have posted above. OK I think I found a...
- 14 Nov 2012
- Forum: MultiCharts
- Topic: Once..begin sometimes triggered twice [SOLVED]
- Replies: 9
- Views: 3241
Re: Once Begin: Executed twice... Any reason [SOLVED]
Hello Martin, Probably your code requires more than two bars for calculation. Please try to increase SetMaxBarsBack value and post your sample code here if you still have the issue. Hello Henry Result for setBarMaxBack: My code may be difficult to reproduce since I do have special function and dll ...
- 14 Nov 2012
- Forum: MultiCharts
- Topic: Once..begin sometimes triggered twice [SOLVED]
- Replies: 9
- Views: 3241
Once Begin: Executed twice... Any reason [SOLVED]
Hello Any reason why Once Begin codes lines are repeated twice? I got some initialization code that I have put inside a Once Begin ... ... end; I see that user JoshM as issued a similar post about the subject and user DRU as issued a solution by seting the SetBarsMaxBack (2) >1 to resolve the proble...
- 13 Nov 2012
- Forum: MultiCharts
- Topic: Once..begin sometimes triggered twice [SOLVED]
- Replies: 9
- Views: 3241
Re: Once..begin sometimes triggered twice [SOLVED]
It is auto maximum number of bars back calculations ... Set up MaxBarsStudyWillReference manually to 20 and look on results. The algorithm's work is looks like: 1) Set MaxBB = 0. Calculate. Detect that we need 1 BB. Break (Status Off). 2) Set MaxBB = 6. Calculate. Detect that we need *** BB. Break ...
- 08 Nov 2012
- Forum: MultiCharts
- Topic: Another voting request: Adding rectangular function to MC
- Replies: 0
- Views: 767
Another voting request: Adding rectangular function to MC
Hello I did post a request to MC to add rectangular drawing function to MC. I don't think that it is a complicated job for the coder because all the code is embedded in MC since we can draw them manually. I wish I could code to draw a rectangular over pertinent area of my chart. If interested, pleas...
- 08 Nov 2012
- Forum: MultiCharts
- Topic: I think most will want to vote for this idea.
- Replies: 5
- Views: 1177
Re: I think most will want to vote for this idea.
I think this will get a lot more votes once everyone knows about it. Confirmation Prompt: Are you sure you want to delete this study/indicator? https://www.multicharts.com/pm/viewissue.php?issue_no=MC-942 If the votes jump by 3 or more from the current 2 votes then it suggests that the bug tracker ...
- 07 Nov 2012
- Forum: MultiCharts
- Topic: Is it possible to define session start / end using code?
- Replies: 7
- Views: 3209
Re: Is it possible to define session start / end using code?
Hello TJ
Indeed, I was not clear
My idea was to calculate pivot for different session starting time. My quest was to send a code to give a new session start time, but it is ilogic to do it
Thanks for the reply
Martin
Indeed, I was not clear
My idea was to calculate pivot for different session starting time. My quest was to send a code to give a new session start time, but it is ilogic to do it
Thanks for the reply
Martin
- 06 Nov 2012
- Forum: MultiCharts
- Topic: Message: Your PC is running out of memory few questions: [SOLVED]
- Replies: 28
- Views: 12605
Re: Message: Your PC is running out of memory few questions: [SOLVED]
N second charts are built from ticks [Source] - I learned something here....I will reduce my backlog - Ok for multiple instance. I had 5 workspaces on a particular instance. I will make sure to limit them. None of them driven by tick data, 15 min. 1h, 4h, day, week. - Will take a closer look to Mul...
- 06 Nov 2012
- Forum: MultiCharts
- Topic: Message: Your PC is running out of memory few questions: [SOLVED]
- Replies: 28
- Views: 12605
Message: Your PC is running out of memory few questions: [SOLVED]
Hello New message did appeared today from Multicharts.exe Your PC is running out of memory Reduce the number of bars on the charts or the number of charts and indicator. I don't use tick charts, the lower resolution is 175 sec. (3minutes * 6 days) - With MC 64, could I still use Global variable and ...
- 04 Nov 2012
- Forum: MultiCharts
- Topic: HotKey to Start / Stop Indicator: Vote for my request
- Replies: 9
- Views: 1619
Re: HotKey to Start / Stop Indicator: Vote for my request
John, here is the command: NameInstrument = GetSymbolName; //Getsymbole name is the code to use to get the instrument in use Actually, I send the symbol name to Excel. With my sheet,I display data for either Eur.Usd or Gbp.Usd. I use it as a verification. So in your case, the validation could be the...
- 04 Nov 2012
- Forum: MultiCharts
- Topic: HotKey to Start / Stop Indicator: Vote for my request
- Replies: 9
- Views: 1619
Re: HotKey to Start / Stop Indicator: Vote for my request
John, to determine witch worspace is in use I did: - Read the barinterval - Send the Numeric Value to a function that return a string - Compare this string with String value stored in GV ( from Excel) Martin ScaleValue = ScaleValue_Calc(Barinterval); scale = scaleString; //ScaleString... afunction t...
- 03 Nov 2012
- Forum: MultiCharts
- Topic: HotKey to Start / Stop Indicator: Vote for my request
- Replies: 9
- Views: 1619
Re: HotKey to Start / Stop Indicator: Vote for my request
John, I did implement your idea global variable to control an indicator I had a problem with a function that send data to Excel. When the same indicators with the same function was use in multiple workspaces under the same instance, I had an error and the indicator did stop I had a condition to look...
- 03 Nov 2012
- Forum: MultiCharts
- Topic: Help for Newbie to MC.....
- Replies: 3
- Views: 1141
Re: Help for Newbie to MC.....
Thank you TJ, for your very helpful reply. 9For some reason the "Thanks" button did not work for me. Welcome aboard stilli. Thanks button does not work either for me for user "TJ" only. He probably receive to many thanks and is counter overflowl. Reload your page "F5" and your thanks will appear. M...
- 02 Nov 2012
- Forum: MultiCharts
- Topic: Is there a way to detect a muti instance session? [SOLVED]
- Replies: 3
- Views: 1368
Re: Is there a way to detect a muti instance session? [SOLVED]
Hello Martin, Do i understand you correctly that if you use you .dll on multiple charts within 1 MultiCharts instance, then it works fine, but if you open another instance, plot new charts there and call the same .dll from there, then it doesn't work? Yes Andrew Open One session... Work fine Open o...
- 02 Nov 2012
- Forum: MultiCharts
- Topic: Is there a way to detect a muti instance session? [SOLVED]
- Replies: 3
- Views: 1368
Is there a way to detect a muti instance session? [SOLVED]
Hello First time that I encounter this problem. My system imply to communicate with Excel. The dll collection that I was using failed after an update and I had to replace them with an Older collection ElExcel.dll. Code will work well if each charts is open in one instance, but failed if more charts ...
- 01 Nov 2012
- Forum: MultiCharts
- Topic: Excel Link.. Send data to Excel /Reactivating an old project [SOLVED]
- Replies: 19
- Views: 5559
Re: Excel Link.. Send data to Excel /Reactivating an old pro [SOLVED]
Dave, I did chat with Roman at your custumer service. They seem to have found the problem For whatever reason, the dll file had to be renamed to Elexcel3.dll. Roman told me that your engeneer will investigate why! Will work with it and let you know. I'm more than happy to see that working finally. M...
- 01 Nov 2012
- Forum: MultiCharts
- Topic: Excel Link.. Send data to Excel /Reactivating an old project [SOLVED]
- Replies: 19
- Views: 5559
Re: Excel Link.. Send data to Excel /Reactivating an old pro [SOLVED]
Dave, good to ear that it work on your side. It mean that there is a light at the end of the tunnel...Hope it is not a train.
Yes, I did try the demo script file, but no luck yet. I will re look and retry again.
Martin
Yes, I did try the demo script file, but no luck yet. I will re look and retry again.
Martin
- 01 Nov 2012
- Forum: MultiCharts
- Topic: dll addressing; 2 different way?
- Replies: 4
- Views: 1780
Re: dll addressing; 2 different way?
Question: Where should reside the dll file?Hello Martin,
"DefineDLLFunc" and "external" work the same way. There is no difference.
Martin
- 31 Oct 2012
- Forum: MultiCharts
- Topic: DLL error: Class not register [SOLVED]
- Replies: 1
- Views: 980
DLL error: Class not register [SOLVED]
Hello
I want to use special dll to communicate with Excel
I got the message Error: " Class not registered"
What could be the cause?
Martin
I want to use special dll to communicate with Excel
I got the message Error: " Class not registered"
What could be the cause?
Martin
- 31 Oct 2012
- Forum: MultiCharts
- Topic: dll addressing; 2 different way?
- Replies: 4
- Views: 1780
dll addressing; 2 different way?
Hello My un-achieved goal is to use ELExcel.dll collection to send data to Excel. No luck yet. I decided to investigate how the Global variable function do address the dll. What is the difference between those way to address a dll? Global variable: DefineDLLFunc: "GlobalVariable.dll", lpstr, "GV_Get...
- 31 Oct 2012
- Forum: MultiCharts
- Topic: Excel Link.. Send data to Excel /Reactivating an old project [SOLVED]
- Replies: 19
- Views: 5559
Re: Excel Link.. Send data to Excel /Reactivating an old pro [SOLVED]
I'm using MC 32Hello Martin,
It seems like the problem is in the dll itself. Do you use MC 32 bit? What is the Windows version?
My Windows is Win 7 64
My Excel is Office 2010 32 bit
Martin
- 31 Oct 2012
- Forum: MultiCharts
- Topic: Excel Link.. Send data to Excel /Reactivating an old project [SOLVED]
- Replies: 19
- Views: 5559
Re: Excel Link.. Send data to Excel /Reactivating an old pro [SOLVED]
Hello Martin, I have sent you the link to ELXL library in PM. Do you have any particular questions regarding this library? Thanks I never succeed to work with that library. I installed your proposed one and still the same problem. I always get error 50 - Excel sheet do exist and is opened - One ins...
- 30 Oct 2012
- Forum: MultiCharts
- Topic: Excel Link.. Send data to Excel /Reactivating an old project [SOLVED]
- Replies: 19
- Views: 5559
Excel Link.. Send data to Excel /Reactivating an old project [SOLVED]
Hello
I want to reactivate an old project using Excel Link ELXL function. Anybody succeeded using that collection?
Martin
I want to reactivate an old project using Excel Link ELXL function. Anybody succeeded using that collection?
Martin
- 30 Oct 2012
- Forum: MultiCharts
- Topic: Running, Stopping an indicator using a mouseclickevent
- Replies: 5
- Views: 3968
Re: Running, Stopping an indicator using a mouseclickevent
Henry,arjfca, I have sent you the fix for testing via email.
I did installed your newer version, but problem still there + create another dll problem.
I will sent info to your email
Martin
- 29 Oct 2012
- Forum: MultiCharts
- Topic: How could I get Free delayed quotes for stocks on the TSE
- Replies: 1
- Views: 750
How could I get Free delayed quotes for stocks on the TSE
Hello
Any idea on how I could get free delayed quote for TSE stock. My data provider is IB and I don't see on their data subscription the free quote
Martin
Any idea on how I could get free delayed quote for TSE stock. My data provider is IB and I don't see on their data subscription the free quote
Martin
- 29 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick Event and mouseclickbarnumber
- Replies: 16
- Views: 3524
Re: Mouseclick Event and mouseclickbarnumber
Thanks SP Code does not detect any mouseclick for me. I will look deeper in it after my trading session and come back I will keep the suggestion to not do calculation in the Mouseclick loop A way to remove a re-bouce on a click is to induce a delay between lecture. A 15 ms delay between reading woul...
- 28 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick Event and mouseclickbarnumber
- Replies: 16
- Views: 3524
Re: Mouseclick Event and mouseclickbarnumber
Good day sir I did try with Intrabarpersist and problem do persist. Never tried RecalcPersist. When you mention a flag, what do you mean? Have a good day Christoph Martin I mean a variable you use to make sure that the clickevent will only be executed once (or how often you want it). It would look ...
- 28 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick Event and mouseclickbarnumber
- Replies: 16
- Views: 3524
Re: Mouseclick Event and mouseclickbarnumber
Good day sir
I did try with Intrabarpersist and problem do persist. Never tried RecalcPersist.
When you mention a flag, what do you mean?
Have a good day Christoph
Martin
I did try with Intrabarpersist and problem do persist. Never tried RecalcPersist.
When you mention a flag, what do you mean?
Have a good day Christoph
Martin
- 28 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick Event and mouseclickbarnumber
- Replies: 16
- Views: 3524
Re: Mouseclick Event and mouseclickbarnumber
Hello Henry Anyway to remove the re-bounce on the reading. Many lecture done for one click. Value is kept in memory and re-use later ( re print on the output window) Martin :) Hello Martin, Please explain what do you mean exactly. Henry, Please see the snap picture of my output window. I clicked on...
- 26 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick Event and mouseclickbarnumber
- Replies: 16
- Views: 3524
Re: Mouseclick Event and mouseclickbarnumber
use intrabarpersist[/quote]
Same problem
Martin
Same problem
Martin
- 26 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick Event and mouseclickbarnumber
- Replies: 16
- Views: 3524
Re: Mouseclick Event and mouseclickbarnumber
Hello Henry Anyway to remove the re-bounce on the reading. Many lecture done for one click. Value is kept in memory and re-use later ( re print on the output window) Martin :) Hello Martin, Please explain what do you mean exactly. Henry, Please see the snap picture of my output window. I clicked on...
- 26 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick Event and mouseclickbarnumber
- Replies: 16
- Views: 3524
Re: Mouseclick Event and mouseclickbarnumber
Hello KhaosTrader, Please try this code: [ProcessMouseEvents = true] vars: vClickBarNbr(0), vLastBar(0), vBarsAgo(0), vClickBarHigh(0), vClickBarLow(0); if MouseClickShiftPressed then begin vClickBarNbr = MouseClickBarNumber; vLastBar = BarNumber + MaxBarsBack; vBarsAgo = vLastBar-vClickBarNbr ; if...
- 24 Oct 2012
- Forum: MultiCharts
- Topic: Macros with Macro Express / Auto Hot Key driving MC
- Replies: 5
- Views: 2055
Re: Macros with Macro Express / Auto Hot Key driving MC
I figure out how to use the timers and such but at the moment trying to figure out how to reliably enter ".rld glob" in the command line... Did you chat with MC technical support about your "not triggerd" alarm? AutoHotKey solution idea Solution 1 simulate your click using mouse movement in AutoHot...
- 24 Oct 2012
- Forum: MultiCharts
- Topic: Macros with Macro Express / Auto Hot Key driving MC
- Replies: 5
- Views: 2055
Re: Macros with Macro Express / Auto Hot Key driving MC
Folks, Looking for some feedback from those in the community that have used either Macro Express or Auto Hot Key to drive MC? I am looking to do an auto reload of my workspaces at a certain time of the day i.e use ".rld glob" @ time = X at a certain time of the day.... Does anyone have a Macro that...
- 24 Oct 2012
- Forum: MultiCharts
- Topic: Importing MB tick data
- Replies: 7
- Views: 1762
Re: Importing MB tick data
I was unaware of this feature. While I know this isn't your obligation to help me with Excel, could you give me a quick description of how to do this? Much appreciated! Hello Matricks Best site for Excel question is MrExcel forum ( google it) Can't beat the price it cost for the information.... fre...
- 21 Oct 2012
- Forum: MultiCharts
- Topic: A list of number in variable: Wath type of variable? [SOLVED]
- Replies: 5
- Views: 1377
Re: A list of number in variable: Wath type of variable? [SOLVED]
Good day TJ The number of variable is to be defined by a an Input value What I want to do. I'm defining and show a bar that as depict an increase of volatility. To do so, I compare body's of previous bar. If the actual body is greater than (x) numbers of body bar before, then this bar is a Wide Rang...
- 21 Oct 2012
- Forum: MultiCharts
- Topic: A list of number in variable: Wath type of variable? [SOLVED]
- Replies: 5
- Views: 1377
Re: A list of number in variable: Wath type of variable? [SOLVED]
Hello In a function, I want to create a list of numbers separated by a comma like Alist=(1.2345,1.2356,1.2367,1.2389) What kind of variable should I declare. It can't be a number since a comma will separate the list. I could declare the list as a string, then use a Str2Num, but if there is another ...
- 20 Oct 2012
- Forum: MultiCharts
- Topic: A list of number in variable: Wath type of variable? [SOLVED]
- Replies: 5
- Views: 1377
A list of number in variable: Wath type of variable? [SOLVED]
Hello In a function, I want to create a list of numbers separated by a comma like Alist=(1.2345,1.2356,1.2367,1.2389) What kind of variable should I declare. It can't be a number since a comma will separate the list. I could declare the list as a string, then use a Str2Num, but if there is another w...
- 18 Oct 2012
- Forum: MultiCharts
- Topic: Forgoit: How do I set the price resolution to be 1/2 pip [SOLVED]
- Replies: 1
- Views: 969
Forgoit: How do I set the price resolution to be 1/2 pip [SOLVED]
Hello
A blank, How do I set for my charts to show a resolution of 1/2 pip. Actually it is set to .1 pip but IB minimum is 0.5
1.23455
Martin
A blank, How do I set for my charts to show a resolution of 1/2 pip. Actually it is set to .1 pip but IB minimum is 0.5
1.23455
Martin
- 14 Oct 2012
- Forum: MultiCharts
- Topic: HotKey to Start / Stop Indicator: Vote for my request
- Replies: 9
- Views: 1619
Re: HotKey to Start / Stop Indicator: Vote for my request
I use to use a macro in my database program to turn an indicator on and off. it sent key strokes to do all the keys. You could do this in MacroExpress and it gives you a list of all the available key combinations (analysing all programs and what they have already used). I think it is better to go t...
- 14 Oct 2012
- Forum: MultiCharts
- Topic: Is it possible to define session start / end using code?
- Replies: 7
- Views: 3209
Is it possible to define session start / end using code?
Hello I want to write some line of code to define pivot point for a given period Pivot point is calculated using High , Low, Close of a given period. Actually, my session is defined in the QuoteManager Let say that I want to calculate a daily pivot points What is a day: - Start @ 0 GMT - Start @ New...
- 14 Oct 2012
- Forum: MultiCharts
- Topic: HotKey to Start / Stop Indicator: Vote for my request
- Replies: 9
- Views: 1619
HotKey to Start / Stop Indicator: Vote for my request
Hello I did post a request to MC for new coding option that would allow to start / Stop an indicator directly from the keyboard hotkey combination instead of a menu driven like it is actually My idea is to have the possibility to code a key combination that will set "on" or "Off" an indicator Actual...
- 12 Oct 2012
- Forum: MultiCharts
- Topic: Mouse over a bar: Is there a function to capture the info [SOLVED]
- Replies: 2
- Views: 1114
Re: Mouse over a bar: Is there a function to capture the inf [SOLVED]
Hello Chris and others This code create error Try to reference to a future bar Also, Mouseclick events seems buggy. Many instance is recorded with a simple click Once error detected, the indicator is stopped. When tried to restart it, error popup immediatly. I have seen up to ten popup. To resolve t...
- 11 Oct 2012
- Forum: MultiCharts
- Topic: Mouse over a bar: Is there a function to capture the info [SOLVED]
- Replies: 2
- Views: 1114
Mouse over a bar: Is there a function to capture the info [SOLVED]
Hello
Is there a function to capture the OHLC of a bar when mouse is over it. I tough that MC8 did include this function, but if so, I don't found it.
The goal is to capture bar data using mouseclick event
Martin
Is there a function to capture the OHLC of a bar when mouse is over it. I tough that MC8 did include this function, but if so, I don't found it.
The goal is to capture bar data using mouseclick event
Martin
- 11 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick events
- Replies: 8
- Views: 2167
Re: Mouseclick events
I dont understand why you want to set [ProcessMouseEvents = False]; ? If you want to reset the sound to be ready for one of the next click, add one more line If MouseClickShiftPressed then Sound = true; So if you press MouseClickCtrlPressed the sound appears one time, then use MouseClickShiftPresse...
- 11 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick events
- Replies: 8
- Views: 2167
Re: Mouseclick events
Use a intrabarpersist vars to play the sound only once. To recalculate your study take a look a ReCalcPersist and ReCalculate. [ProcessMouseEvents = True]; variables: intrabarpersist Sound(false),ReCalcPersist recalc_once(True); Once begin Sound = True; end; if MouseClickCtrlPressed and LastBarOnCh...
- 11 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick events
- Replies: 8
- Views: 2167
Re: Mouseclick events
Use a intrabarpersist vars to play the sound only once. To recalculate your study take a look a ReCalcPersist and ReCalculate. [ProcessMouseEvents = True]; variables: intrabarpersist Sound(false),ReCalcPersist recalc_once(True); Once begin Sound = True; end; if MouseClickCtrlPressed and LastBarOnCh...
- 11 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick events
- Replies: 8
- Views: 2167
Re: Mouseclick events
You need [ProcessMouseEvents = True]; at the begin of the code. Posted an example how to use here : https://www.multicharts.com/discussion/viewtopic.php?f=5&t=10067 and one here (sef file without source code) https://www.multicharts.com/discussion/viewtopic.php?f=5&t=9984 Thank you I did test the c...
- 11 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick events
- Replies: 8
- Views: 2167
Re: Mouseclick events
Hello Did try if MouseClickCtrlPressed then PlaySound ("C:\Users\Utilisateur\Documents\Bourse\Sound\Going Short.wav") My understanding is that If left mouseclick and CTRL key is press, the condition should be true and the Playsound should be activated. No event triggerd Do we need to enable the even...
- 11 Oct 2012
- Forum: MultiCharts
- Topic: Mouseclick events
- Replies: 8
- Views: 2167
Mouseclick events
Hello
I don't see any mouseclick events in the wiki. Any one is using it?
Is Mouse click events only for MC.Net?
I want to test for,
- Grab price of a given bar
- Set a variable that will enable an indicator to be restart... 1' line of code being test the variable value
Martin
I don't see any mouseclick events in the wiki. Any one is using it?
Is Mouse click events only for MC.Net?
I want to test for,
- Grab price of a given bar
- Set a variable that will enable an indicator to be restart... 1' line of code being test the variable value
Martin
- 11 Oct 2012
- Forum: MultiCharts
- Topic: Running, Stopping an indicator using a mouseclickevent
- Replies: 5
- Views: 3968
Running, Stopping an indicator using a mouseclickevent
Hello By any chance, is there a way to have an indicator be run or stopped using only a mouse click. That would be great. Actually, I need to right click, select indicator, select the appropriate one, set the status on / off. Once in a while, I need to reset an indicator because this one is used in ...
- 08 Oct 2012
- Forum: MultiCharts
- Topic: If I don't find info in wiki, where do I look?
- Replies: 4
- Views: 1034
Re: If I don't find info in wiki, where do I look?
Hello HenryThe EasyLanguage Functions & Reserved Words Reference can be found at Additional Information Sources Wiki page.
Strangely, the
The EasyLanguage Functions & Reserved Words Reference page is not loading
Will try later
Martin
- 06 Oct 2012
- Forum: MultiCharts
- Topic: If I don't find info in wiki, where do I look?
- Replies: 4
- Views: 1034
If I don't find info in wiki, where do I look?
Hello MC friends I tend to forget to look in WIKI for info, but when I do it occured that I don't found info for what i'm looking. Is there other resource to search within MC or I need to Googled my search. EX of functions not referenced in wiki: Pivot,PivotHighVS, PivotHighVSBar In previous MC site...
- 05 Oct 2012
- Forum: MultiCharts
- Topic: Dummy question: What is "expert commentary"? [SOLVED]
- Replies: 5
- Views: 2052
Re: Dummy question: What is "expert commentary"? [SOLVED]
I had forgot to use this tool. Thanks for the reminderHave you tried the Wiki?Hello
I read some post that was talking about "Expert Commentary". But, was is it exactly
I have not found a link that explain it.
Is it to post some commentary above a bar?
Martin
Martin
- 05 Oct 2012
- Forum: MultiCharts
- Topic: Dummy question: What is "expert commentary"? [SOLVED]
- Replies: 5
- Views: 2052
Dummy question: What is "expert commentary"? [SOLVED]
Hello
I read some post that was talking about "Expert Commentary". But, was is it exactly
I have not found a link that explain it.
Is it to post some commentary above a bar?
Martin
I read some post that was talking about "Expert Commentary". But, was is it exactly
I have not found a link that explain it.
Is it to post some commentary above a bar?
Martin
- 04 Oct 2012
- Forum: MultiCharts
- Topic: Charts not updating after a Java update for IB TWS
- Replies: 2
- Views: 881
Re: Charts not updating after a Java update for IB TWS
Hello Henry
Problem was resolved this mornig by your Chat staff
I was receiving quote, I could see the files numbers increased in Quote Manager. But for whatever reason, I had a pacing violation that was affecting only Gbp.Usd
Have a good day
Martin
Problem was resolved this mornig by your Chat staff
I was receiving quote, I could see the files numbers increased in Quote Manager. But for whatever reason, I had a pacing violation that was affecting only Gbp.Usd
Have a good day
Martin
- 03 Oct 2012
- Forum: MultiCharts
- Topic: Russell 2000 Emini TF Futures How to get it from IB [SOLVED]
- Replies: 1
- Views: 1246
Russell 2000 Emini TF Futures How to get it from IB [SOLVED]
Hello
I would like to get a chart for the Russell 2000 Emini TF Futures. How do I get it from IB data server.
I did subscribe to the Russel data but i can' find it from the source
Any help appreciated
Martin
I would like to get a chart for the Russell 2000 Emini TF Futures. How do I get it from IB data server.
I did subscribe to the Russel data but i can' find it from the source
Any help appreciated
Martin
- 03 Oct 2012
- Forum: MultiCharts
- Topic: Charts not updating after a Java update for IB TWS
- Replies: 2
- Views: 881
Charts not updating after a Java update for IB TWS
Hello IB is my data server. I had to update Java for my TWS. Since, the charts are not updating I did look in the Quote Manager and files are received Any Idea what I should do? Martin Edit: All pairs: except Eur.Usd and Gbp.Usd are updating. These two, the one that I have on all my charts does not ...
- 19 Sep 2012
- Forum: MultiCharts
- Topic: AutoHotKey and MacroExpress won't work
- Replies: 4
- Views: 1311
Re: AutoHotKey and MacroExpress won't work
Hi, I have been trying all day to automate some of my processes in MC with AutoHotKey and MacroExpress products. I could not get anything to work it seems that MC does not allow other applications to work simultaneously. Has anybody been successful in recording key strokes or mouse clicks in MC thr...
- 19 Sep 2012
- Forum: MultiCharts
- Topic: Volume profile width of the bars: How to adjust
- Replies: 1
- Views: 744
Volume profile width of the bars: How to adjust
Hello
Lately, the width of the bar in my volume profile section as been modified. How did I do that? I don't know!!!!
How can I replace it to a thin bar like it use to.
I did play with the visual order, but it does not seem to resolve the problem
Martin
Lately, the width of the bar in my volume profile section as been modified. How did I do that? I don't know!!!!
How can I replace it to a thin bar like it use to.
I did play with the visual order, but it does not seem to resolve the problem
Martin
- 17 Sep 2012
- Forum: MultiCharts
- Topic: Macro button [SOLVED]
- Replies: 2
- Views: 1130
Re: Macro button [SOLVED]
Hello, in my trading I use W.D Gann's squaring technique of my charts and for that I use the "Movement Size" setting for the Price scale and the Bars Spacing Pixels for the Time. I sometimes switch to automatic scaling with a "Reset Scales" hotkey and I change the bars spacing. Is there any way tha...
- 13 Sep 2012
- Forum: MultiCharts
- Topic: Any reason why Price marker not appearing [SOLVED]
- Replies: 3
- Views: 1072
Re: Any reason why Price marker not appearing [SOLVED]
Right click on chart, select Visual OrderHello
A workspace is displaying 3 charts with the same scales. On the first charts, price marker is not displayed.
Martin
send the instrument to the back
It worked
Many Thanks!
- 13 Sep 2012
- Forum: MultiCharts
- Topic: Any reason why Price marker not appearing [SOLVED]
- Replies: 3
- Views: 1072
Any reason why Price marker not appearing [SOLVED]
Hello
A workspace is displaying 3 charts with the same scales. On the first charts, price marker is not displayed.
Martin
A workspace is displaying 3 charts with the same scales. On the first charts, price marker is not displayed.
Martin
- 10 Sep 2012
- Forum: MultiCharts
- Topic: Is it a glitch in Interactive Broker data [SOLVED]
- Replies: 15
- Views: 3192
Resolved: Is it a glitch in Interactive Broker data [SOLVED]
I saw that spike down to 1.17 on Sept. 3 with EUR.USD. TWS Build 926.6, June 11 Java 1.7.0_04. Tried all the same things above to edit it. Go to Format Instrument > Setting tab > Chart Settings, and check the Session selection. I had 24 hour selected and the spike shows up. I changed it to Default,...
- 10 Sep 2012
- Forum: MultiCharts
- Topic: Multicharts and SSD
- Replies: 9
- Views: 2403
Resolved: Multicharts and SSD
Hello I'm trying to remove my data from my SSD drive to a hard disk. I'm following the instruction given by the link https://www.multicharts.com/trading-software/index.php/How_to_Move_MultiCharts_Database,_Studies_and_Logs_from_C_Drive My problem is I don't find the path registry location: HKEY_LOC...
- 09 Sep 2012
- Forum: MultiCharts
- Topic: Time left on a bar greater than the scale value??? [SOLVED]
- Replies: 1
- Views: 679
Resolve: Time left on a bar greater than the scale value??? [SOLVED]
Did close down my PC and reload... Chart OK now
Martin
Martin
- 09 Sep 2012
- Forum: MultiCharts
- Topic: Time left on a bar greater than the scale value??? [SOLVED]
- Replies: 1
- Views: 679
Time left on a bar greater than the scale value??? [SOLVED]
Hello
A strange problem I got
I got a 175 seconds charts display. The time left on a bar is greater than the value of the scale. On my annexed picture, time left is 4:17 seconds.
I did try to saved it under another time scale, but same problem
Martin
A strange problem I got
I got a 175 seconds charts display. The time left on a bar is greater than the value of the scale. On my annexed picture, time left is 4:17 seconds.
I did try to saved it under another time scale, but same problem
Martin
- 09 Sep 2012
- Forum: MultiCharts
- Topic: Multicharts and SSD
- Replies: 9
- Views: 2403
Re: Multicharts and SSD
Bump... Any idea?
- 08 Sep 2012
- Forum: MultiCharts
- Topic: Multicharts and SSD
- Replies: 9
- Views: 2403
Re: Multicharts and SSD
Hello I'm trying to remove my data from my SSD drive to a hard disk. I'm following the instruction given by the link https://www.multicharts.com/trading-software/index.php/How_to_Move_MultiCharts_Database,_Studies_and_Logs_from_C_Drive { The second step is to change the registry key: Click Windows S...
- 07 Sep 2012
- Forum: MultiCharts
- Topic: Is it a glitch in Interactive Broker data [SOLVED]
- Replies: 15
- Views: 3192
Re: Is it a glitch in Interactive Broker data [SOLVED]
If you are using Interactive Brokers as a data source you may sometimes get bad ticks, so-called "spikes" with the price 10-15 points higher or lower than current price. This is a known issue on IB API side and has been confirmed by IB as a bug. In order to solve the issue please enable "Generate n...
- 06 Sep 2012
- Forum: MultiCharts
- Topic: Is it a glitch in Interactive Broker data [SOLVED]
- Replies: 15
- Views: 3192
Re: Is it a glitch in Interactive Broker data [SOLVED]
All as been updated... same big spike.It's a good idea to use the latest IB API and Java versions as well.
I'm just curious... anybody as seen the same spike with IB data on Sept 3?
Martin
- 06 Sep 2012
- Forum: MultiCharts
- Topic: Is it a glitch in Interactive Broker data [SOLVED]
- Replies: 15
- Views: 3192
Re: Is it a glitch in Interactive Broker data [SOLVED]
Have you seen this big spike down on your side. It occured on September 03 2012 @ 17:15:01 . I did check the 1 second bid chart for that dayWhat is your TWS version?
Martin
- 05 Sep 2012
- Forum: MultiCharts
- Topic: Is it a glitch in Interactive Broker data [SOLVED]
- Replies: 15
- Views: 3192
Re: Is it a glitch in Interactive Broker data [SOLVED]
Build 926.5 May 302012What is your TWS version?
Jave: 1.6.0_35
- 05 Sep 2012
- Forum: MultiCharts
- Topic: Is it a glitch in Interactive Broker data [SOLVED]
- Replies: 15
- Views: 3192
Re: Is it a glitch in Interactive Broker data [SOLVED]
Hello Henry
I looed again an IB chart frrom TWS using the bid ans ask and this spike do appear in their database to.
So I suppose that this is a real data
I did close all charts, kill Eur.Usd erase the cache and reload. Nothing more I can do
Martin
I looed again an IB chart frrom TWS using the bid ans ask and this spike do appear in their database to.
So I suppose that this is a real data
I did close all charts, kill Eur.Usd erase the cache and reload. Nothing more I can do
Martin
- 04 Sep 2012
- Forum: MultiCharts
- Topic: Is it a glitch in Interactive Broker data [SOLVED]
- Replies: 15
- Views: 3192
Is it a glitch in Interactive Broker data [SOLVED]
Hello I did not check my charts for few days. I look at yesterday chart and when the market reopen on September 03 I have a massive down spike of 894 pips on Eur.Usb... Price drop to 1.1700 Wow - I see the same spike in all my charts. - I did check on TWS chart on the spike is not there - I did relo...
- 28 Aug 2012
- Forum: MultiCharts
- Topic: Static Variables in EL?
- Replies: 2
- Views: 960
Re: Static Variables in EL?
Two solution that I think of 1- Use 2 charts. ! hour & 5 minute Read your data, then wait for the completion of the 5 minutes bar to do you test 2- Read your PC time using the function "MachineTime". Then add 5 minutes to your result Read back the PC time and compare it with your hour + 5 minutes va...
- 26 Aug 2012
- Forum: MultiCharts
- Topic: How to disconnect my workplace to my account [SOLVED]
- Replies: 2
- Views: 993
Re: How to disconnect my workplace to my account [SOLVED]
Hello Maybe a dummy question, but an unresolved for me. Last week, I played with the DOM. Since then, my Workspace keep to connect to my account. I'm receiving voice message and it seems to get in conflict with my actualHow can I cut any link with it. I'm trading outside MC and I only use to displa...
- 26 Aug 2012
- Forum: MultiCharts
- Topic: How to disconnect my workplace to my account [SOLVED]
- Replies: 2
- Views: 993
How to disconnect my workplace to my account [SOLVED]
Hello Maybe a dummy question, but an unresolved for me. Last week, I played with the DOM. Since then, my Workspace keep to connect to my account. I'm receiving voice message and it seems to get in conflict with my actualHow can I cut any link with it. I'm trading outside MC and I only use to display...
- 25 Aug 2012
- Forum: MultiCharts
- Topic: MULTICHARTS 8.0 RELEASE
- Replies: 143
- Views: 51644
Re: MULTICHARTS 8.0 RELEASE
I've renamed the 'position.opened.wav' and 'position.closed.wav' in the "C:\Program Files (x86)\MultiCharts\sounds" directory since I wanted to use my own sound files (from the signals and TWS), but wanted to keep the sound alerts about connection lost (so turning off the sounds in Preferences isn'...
- 25 Aug 2012
- Forum: MultiCharts
- Topic: Nice, but unwanted female voice is talking to me....
- Replies: 3
- Views: 1458
Re: Nice, but unwanted female voice is talking to me....
If you only want to disable certain sounds, for example if you wanted to turn off all sounds except connection lost, see this post . This feature request is about more sound options if you don't want to turn them all on / all of but want to specify which to turn off and which sound file to use. Jos...
- 24 Aug 2012
- Forum: MultiCharts
- Topic: Nice, but unwanted female voice is talking to me....
- Replies: 3
- Views: 1458
Nice, but unwanted female voice is talking to me....
Hello Today, out of no where, a nice female voice is taking to me when I connect, loss connection or any event that is occurring with my account connection. I'm using IB and TWS. I have enabled and create my own voice message that is connected with TWS. So now, I'm receiving two voices messages for ...
- 24 Aug 2012
- Forum: MultiCharts
- Topic: Searching for a function to multiply by "10x " [SOLVED]
- Replies: 1
- Views: 791
Searching for a function to multiply by "10x " [SOLVED]
Hello
My English is not perfect, so I don't know what to look for in the help
I'm looking for a function that will multiply a number by 10 * number of time.
In French, we call that an "Exposant" 10² = 100 "10 Exposant 2" = 100
What is the function that do that? Number * function(2)
Martin
My English is not perfect, so I don't know what to look for in the help
I'm looking for a function that will multiply a number by 10 * number of time.
In French, we call that an "Exposant" 10² = 100 "10 Exposant 2" = 100
What is the function that do that? Number * function(2)
Martin
- 23 Aug 2012
- Forum: MultiCharts
- Topic: DOM formating [SOLVED]
- Replies: 1
- Views: 854
DOM formating [SOLVED]
Hello
First time that I look at the DOM windows. Is it possible to format the price scale so it increment by 0.5pip like my charts.
Actually, it is incemented by 0.1 pip. It make it more difficult to follow.
Martin
First time that I look at the DOM windows. Is it possible to format the price scale so it increment by 0.5pip like my charts.
Actually, it is incemented by 0.1 pip. It make it more difficult to follow.
Martin
- 22 Aug 2012
- Forum: MultiCharts
- Topic: How to calculate cost of keeping a position overnight
- Replies: 4
- Views: 953
Re: How to calculate cost of keeping a position overnight
Hello Andrew I think i have resolve my question Here is my calculation: Risk$: amount of $ per transactions. ( 50$) Quantity of unit = $ risk / Pip at risk + slippage $ risk = Amount per transaction - Transact fee ( 5$ per 100K) - cost to keep over night I will use 5% as interest charge Calculation ...
- 22 Aug 2012
- Forum: MultiCharts
- Topic: How to calculate cost of keeping a position overnight
- Replies: 4
- Views: 953
Re: How to calculate cost of keeping a position overnight
Hello Andrew I want to adjust my position size by including or not the rollover cost estimate. My size is calculating by the risk + my cost + slippage ( estimate) + fee (interest charged) to keep position for 1 day All i'm looking for is a basic formula. No need to get the exact value By knowing in ...
- 21 Aug 2012
- Forum: MultiCharts
- Topic: How to calculate cost of keeping a position overnight
- Replies: 4
- Views: 953
How to calculate cost of keeping a position overnight
Hello I never kept a position pass the cut off hour. Mainly to save the interest cost to carry on a trade overnight. I start to think that it me be profitable to kept it sometime even if it cost me some $. Dummy question: How do I evaluate the cost to keep Eur.Usd overnight Any input appreciated Mar...
- 03 Aug 2012
- Forum: MultiCharts
- Topic: Testing for a 2' instrument in data 2 [SOLVED]
- Replies: 2
- Views: 1000
Re: Testing for a 2' instrument in data 2 [SOLVED]
That what the solution that i had implented
Martin
Martin
- 31 Jul 2012
- Forum: MultiCharts
- Topic: IB historical data: Is it possible to add data?
- Replies: 1
- Views: 1198
IB historical data: Is it possible to add data?
Hello IB users, know that IB data server is limited to one year ( 12 months) historical data. Is it possible to buy or get daily / weekly and have the data in added to the historical one from IB. Basically, i'm looking to get at least 3 years of daily and 10 years of weekly historical data Any info ...