I am wondering if there is a study in MC that will plot yesterdays open, close, high & low?
Thanks,
Simon
Yesterdays OHLC
- TJ
- Posts: 7743
- Joined: 29 Aug 2006
- Location: Global Citizen
- Has thanked: 1033 times
- Been thanked: 2222 times
- RobotMan
- Posts: 375
- Joined: 12 Jul 2006
- Location: Los Altos, California, USA
- Has thanked: 31 times
- Been thanked: 13 times
- Contact:
If you are using intraday data, I used to be able to use
OpenD(1)
HighD(1)
LowD(1)
CloseD(1)
For yesterday's OHLC in TS, but this does not seem to work in MC.
And don't even try
DailyOpen
DailyHigh
DailyLow
DailyClose
They're pretty useless.
So, you need to write code that references the prior intraday data.
Here's some sample code that might get you close. It does not check overnight data, I have another similar indicator that does that. And oh, BTW, I use it on emini tick data, not on stocks.
I know that seems a lot more complicated than OpenD, HighD etc. But that is the way it is. Maybe Marina or Andrew know an easier way.
Hope that helps,
Bob Perry
Los Altos, CA
OpenD(1)
HighD(1)
LowD(1)
CloseD(1)
For yesterday's OHLC in TS, but this does not seem to work in MC.
And don't even try
DailyOpen
DailyHigh
DailyLow
DailyClose
They're pretty useless.
So, you need to write code that references the prior intraday data.
Here's some sample code that might get you close. It does not check overnight data, I have another similar indicator that does that. And oh, BTW, I use it on emini tick data, not on stocks.
Code: Select all
{ Bob Perry 09/2007
Close of Yesterday: Cyan, point, weight=3
Open of today: White, point, weight=3
Intraday Highest High, Lowest Low: red/green cross
Yesterday Highest High, Lowest Low: red/green dot
}
Inputs: PriceLev(1.00), True_C1(0);
Vars: Reset(0), CCval(C), SpacerTxt(" "),
C1val(C), O1val(C), HHval(C), LLval(C), H1val(C), L1val(C),
C1ref(-1), O1ref(-1), HHref(-1), LLref(-1), H1ref(-1), L1ref(-1) ;
// Initialize Variables
If Date <> Date[1] then Reset = 0;
If time >= SessionStartTime(1,2) and time <= SessionEndTime(1,2) then begin
If Reset = 0 then begin
C1val = CCval;
H1val = HHval;
L1val = LLval;
HHval = 0;
LLval = 999999;
Reset = 1;
End;
HHval = IFF(High>HHval,High,HHval);
LLval = IFF(Low<LLval,Low,LLval);
CCval = IFF(True_C1=0,Close,True_C1);
If Reset = 1 then O1val = Open;
Reset = 2;
End;
// Plots
If (AbsValue(O1val-H) < PriceLev) or (AbsValue(L-O1val) < PriceLev) then begin
Plot1(O1val,"OpenToday");
If Date = CurrentDate AND time_s >= LastCalcSSTime then begin
If O1ref <> -1 Then Text_SetLocation_s(O1ref, Date, Time_s, O1val)
Else Begin
O1ref = Text_New_s(Date, Time_s, O1val, SpacerTxt + "Open");
Text_SetStyle(O1ref, 0, 2);
Text_SetColor(O1ref, white) ;
End;
End;
End;
If (AbsValue(C1val-H) < PriceLev) or (AbsValue(L-C1val) < PriceLev) then begin
Plot2(C1val,"Close[1]");
If Date = CurrentDate AND time_s >= LastCalcSSTime then begin
If C1ref <> -1 Then Text_SetLocation_s(C1ref, Date, Time_s, C1val)
Else Begin
C1ref = Text_New_s(Date, Time_s, C1val, SpacerTxt + "C1");
Text_SetStyle(C1ref, 0, 2);
Text_SetColor(C1ref, cyan) ;
End;
End;
End;
If HHval-H <= PriceLev then Begin
Plot3(HHval, "HH");
If Date = CurrentDate AND time_s >= LastCalcSSTime then begin
If HHref <> -1 Then Text_SetLocation_s(HHref, Date, Time_s, HHval)
Else Begin
HHref = Text_New_s(Date, Time_s, HHval, SpacerTxt + "HH");
Text_SetStyle(HHref, 0, 2);
Text_SetColor(HHref, green) ;
End;
End;
End;
If L-LLval <= PriceLev then Begin
Plot4(LLval, "LL");
If Date = CurrentDate AND time_s >= LastCalcSSTime then begin
If LLref <> -1 Then Text_SetLocation_s(LLref, Date, Time_s, LLval)
Else Begin
LLref = Text_New_s(Date, Time_s, LLval, SpacerTxt + "LL");
Text_SetStyle(LLref, 0, 2);
Text_SetColor(LLref, RGB(255,0,0) ) ;
End;
End;
End;
// Alerts
If H > HHval[1] or L < LLval[1] then Alert;
// Yesterdays HH and LL
If AbsValue(H1val-H) <= PriceLev then Begin
Plot5(H1val, "HH[1]");
If Date = CurrentDate AND time_s >= LastCalcSSTime then begin
If H1ref <> -1 Then Text_SetLocation_s(H1ref, Date, Time_s, H1val)
Else Begin
H1ref = Text_New_s(Date, Time_s, H1val, SpacerTxt + "HH[1]");
Text_SetStyle(H1ref, 0, 2);
Text_SetColor(H1ref, RGB(0,128,0)) ;
End;
End;
End;
If AbsValue(L-L1val) <= PriceLev then Begin
Plot6(L1val, "LL[1]");
If Date = CurrentDate AND time_s >= LastCalcSSTime then begin
If L1ref <> -1 Then Text_SetLocation_s(L1ref, Date, Time_s, L1val)
Else Begin
L1ref = Text_New_s(Date, Time_s, L1val, SpacerTxt + "LL[1]");
Text_SetStyle(L1ref, 0, 2);
Text_SetColor(L1ref, RGB(139,0,0)) ;
End;
End;
End;
// - - - EOF - - -
Hope that helps,
Bob Perry
Los Altos, CA
-
- Posts: 60
- Joined: 21 Dec 2007
- Has thanked: 3 times
- Been thanked: 9 times
Here´s a code to plot yesterdays high & low to intraday charts. Alternative to the plot function you can use the code in brackets to show trendlines, until MC will able to plot flatlines via plot function. Working with trendlines your charts will look better, but it loads your CPU.
Code: Select all
Input: Lookback(1);
var: HH(0),LL(0);
var: PlotEndTime(2200),StartTime(0800), EndTime(2200),
Linie1(0),Linie2(0),Linie3(0);
HH = HighestD(Lookback);
LL = LowestD (Lookback);
plot1(HH,"HH",RGB(128,128,255));
plot2(LL,"LL",RGB(255,104,032));
{Trendlines:
Linie1 = TL_New(date,StartTime,HH,date,EndTime,HH);
Linie2 = TL_New(date,StartTime,LL,date,EndTime,LL);
TL_Setcolor(Linie1,RGB(128,128,255));
TL_Setcolor(Linie2,RGB(255,104,032));
}
- RobotMan
- Posts: 375
- Joined: 12 Jul 2006
- Location: Los Altos, California, USA
- Has thanked: 31 times
- Been thanked: 13 times
- Contact:
I couldn't get HighestD(Lookback) and LowestD (Lookback) to compile in the PLE.
Seems to work ok though.
MC 3.1.1353.400
Bob Perry
Los Altos, CA
Code: Select all
vars: oPeriodOpen(0), oPeriodHigh(0), oPeriodLow(0), oPeriodClose(0);
Value1 = OHLCPeriodsAgo(1, 1, oPeriodOpen, oPeriodHigh, oPeriodLow, oPeriodClose);
Value2 = oPeriodHigh;
Value3 = oPeriodLow;
Plot1(Value2,"H");
Plot2(Value3,"L");
MC 3.1.1353.400
Bob Perry
Los Altos, CA
-
- Posts: 45
- Joined: 31 Jan 2008
-
- Posts: 45
- Joined: 31 Jan 2008
At present, what is plotting using wullenweber's code (using HighD & LowD), seems to actually be yesterdays high & low of the whole 24 hour period.
I am taking it that this is useful to have on charts, though I am after the actual open & close price as well.
With respect to the time periods - even if I change the window to Regular Hours (under format symbol), I am still seeing the whole 24 hour period of prices. I don't want to change the setting in symbol manager as I want the symbol set to 24 hours for other price windows.
I am taking it that this is useful to have on charts, though I am after the actual open & close price as well.
With respect to the time periods - even if I change the window to Regular Hours (under format symbol), I am still seeing the whole 24 hour period of prices. I don't want to change the setting in symbol manager as I want the symbol set to 24 hours for other price windows.
- RobotMan
- Posts: 375
- Joined: 12 Jul 2006
- Location: Los Altos, California, USA
- Has thanked: 31 times
- Been thanked: 13 times
- Contact:
Yeah, these globex markets, by definition are 24 hour. The open is only 15 minutes after the close. That is why I use my own code and initiate and terminate the data collection times. See big post of mine above for sample code.
Now you just have the RTH pit traded hours and save the RTH H, L, C values from the day before. (I use a separate plot that shows the H and L from overnight.)
Bob Perry
Los Altos, CA
Code: Select all
// Initialize Variables
If Date <> Date[1] then Reset = 0;
If time >= SessionStartTime(1,2) and time <= SessionEndTime(1,2) then begin
If Reset = 0 then begin
C1val = CCval;
H1val = HHval;
L1val = LLval;
HHval = 0;
LLval = 999999;
Reset = 1;
End;
HHval = IFF(High>HHval,High,HHval);
LLval = IFF(Low<LLval,Low,LLval);
CCval = IFF(True_C1=0,Close,True_C1);
If Reset = 1 then O1val = Open;
Reset = 2;
End;
Bob Perry
Los Altos, CA