Search found 65 matches

by signalworks
15 Dec 2023
Forum: MultiCharts
Topic: DOM Limits marker persists
Replies: 1
Views: 144

DOM Limits marker persists

The limit markers remain in the DOM window after canceling. It is not possible to set another limit at this level.
MC is connected to IB. The limits have been set in the MC DOM.

How can I delete these markers? Thank you!
by signalworks
08 Aug 2023
Forum: MultiCharts
Topic: Find top X S&P500 companies
Replies: 4
Views: 415

Re: Find top X S&P500 companies

Hello,
would anyone have any ideas about this?
by signalworks
02 Aug 2023
Forum: MultiCharts
Topic: Find top X S&P500 companies
Replies: 4
Views: 415

Re: Find top X S&P500 companies

Hello TJ,

I use the TWS coupled with MC. Only which field and where is this possibly in MC?
Thanks!
by signalworks
01 Aug 2023
Forum: MultiCharts
Topic: Find top X S&P500 companies
Replies: 4
Views: 415

Find top X S&P500 companies

I would like to identify the top 10 S&P500 companies (by market capitalization) and trade them by script. Is it possible to select according to the market capitalization criterion? If yes, would it be possible to access it by code to trade a change in top 10 composition? (e.g. one share out, the new...
by signalworks
11 Jan 2023
Forum: MultiCharts
Topic: Connection to TWS failed [SOLVED]
Replies: 2
Views: 418

Re: Connection to TWS failed [SOLVED]

Thank you Kate, I must have been struck by blindness....
by signalworks
11 Jan 2023
Forum: MultiCharts
Topic: Connection to TWS failed [SOLVED]
Replies: 2
Views: 418

Connection to TWS failed [SOLVED]

Hello,
I am at a bit of a loss. MC can not connect to the TWS with the IB gateway however it works. The API settings in TWS and IBGateway are identical.
TWS version: 10.20 (Standalone Language English)
IBGateway 10.19
MC: 64bit, 14.0 R Build 24200

Where could it hang?
Thanks a lot!
by signalworks
01 Jun 2022
Forum: MultiCharts
Topic: Connecting to TWS failure Error Message
Replies: 7
Views: 7876

Re: Connecting to TWS failure Error Message

Hello Kate,
I have unchecked in both settings and restarted each. but this did not do the trick yet.
by signalworks
31 May 2022
Forum: MultiCharts
Topic: Connecting to TWS failure Error Message
Replies: 7
Views: 7876

Re: Connecting to TWS failure Error Message

Hello,
the connection to TWS v10.14 works without problems, but to v10.15 is acknowledged with error message. The necessary settings have been made. Does anyone else have this problem?
Thanks.
error_tws_connection.PNG
(9.67 KiB) Not downloaded yet
by signalworks
11 Mar 2022
Forum: MultiCharts
Topic: Kasebar-problem
Replies: 3
Views: 719

Re: Kasebar-problem

Hello TJ,

thanks, comparing the present values of the 15min chart above with the corresponding time periods in the Kasebar chart below, there are significant discrepancies.
22-03-11_discrepacies.png
(129.97 KiB) Not downloaded yet
by signalworks
09 Mar 2022
Forum: MultiCharts
Topic: Kasebar-problem
Replies: 3
Views: 719

Kasebar-problem

Hello, when reproducing a 15min. interval in a Kasebar chart, I noticed deviations in the Kasebar display in relation to a regular 15min. chart, which should not actually exist. The 15min. chart is my reference. The second 15min. bar from the left has the high at 16,386.00 and the low at 16,368.75. ...
by signalworks
13 Apr 2021
Forum: MultiCharts
Topic: StopOrder handling in fast market move
Replies: 1
Views: 372

StopOrder handling in fast market move

Hello,

how does MC handle it when the EntryLimit is filled during a fast market movement, but the BracketStop price is directly overrun, even before the StopOrder could be filled. Does an OrderRejected occur here or is the order filled with large slippage? Thanks.

best regards,
sw
by signalworks
25 Sep 2019
Forum: MultiCharts
Topic: Enhanced option for KASE Bar
Replies: 3
Views: 1347

Enhanced option for KASE Bar

Kasebar is known to show almost real "Rangebars", with which there are no serious differences between backtest results and live results. When casebars are generated, the tick exceeding the box size becomes the opening tick of the new casebar. I would like to add the option that this tick should be t...
by signalworks
20 May 2019
Forum: MultiCharts
Topic: IQFeed Rangebar problem
Replies: 5
Views: 1167

Re: IQFeed Rangebar problem

@Svetlana: Your first point solved the problem: 1) Increase the size of a point by changing the Price Scale in instrument settings. Please try Price Scale = 1/100. You will need to re-built the charts to apply the changes. We recommend this method. Setup in Quotemanager (custom settings): iqfeed_pri...
by signalworks
16 May 2019
Forum: MultiCharts
Topic: IQFeed Rangebar problem
Replies: 5
Views: 1167

Re: IQFeed Rangebar problem

Thank you for the explanation, Svetlana. It's strange how you can see in my first post where I compare the TS-feed with the IQFeed. Both feeds have optically seen the same tickchart. But the point chart is different. MC can properly display the TS feed as a point-chart, IQFeed cannot. What 15bar lim...
by signalworks
15 May 2019
Forum: MultiCharts
Topic: IQFeed Rangebar problem
Replies: 5
Views: 1167

Re: IQFeed Rangebar problem

Hello, here a few more pictures to illustrate the problem. tick-based bars are not built correctly. Is there any solution? Thank you.
settings_indu.x_01.PNG
(15.4 KiB) Downloaded 229 times
settings_indu.x_point.PNG
(19.3 KiB) Downloaded 229 times
point_chart_indu.x.PNG
(21.16 KiB) Downloaded 229 times
settings_indu.x_kasebar.PNG
(19.68 KiB) Downloaded 229 times
kasebar_chart_indu.x.PNG
(19.75 KiB) Downloaded 229 times
by signalworks
13 May 2019
Forum: MultiCharts
Topic: IQFeed Rangebar problem
Replies: 5
Views: 1167

IQFeed Rangebar problem

Hello,

I try the IQFeed and noticed, the symbol INDU.X (DowJones Industrial Average Index) is not correctly built as pointchart. Is there a special setting for that? Thanks.
by signalworks
28 Feb 2019
Forum: MultiCharts
Topic: Custom Resolution
Replies: 7
Views: 2236

Re: Custom Resolution

Thanks, Anna. Unfortunately this properties are ReadOnly. I need to set the ResoutionSize with my own calculated value. Is there a way?
by signalworks
26 Feb 2019
Forum: MultiCharts
Topic: Custom Resolution
Replies: 7
Views: 2236

Re: Custom Resolution

Have you any suggestion, how can I achieve the requirement with the given templates? In no one I can find access to the "resolution"-field.
by signalworks
23 Feb 2019
Forum: MultiCharts
Topic: Custom Resolution
Replies: 7
Views: 2236

Re: Custom Resolution

Hello Anna, thanks and sorry, I was a bit confused in my explanation... Instaed of Boxsize I meant Points. I would like to set a #Factor. The Points should be calculated for example Points=marketprice * #Factor / 100. The calculated Chart should be a Points-Charts with adapted pointsize based on the...
by signalworks
22 Feb 2019
Forum: MultiCharts
Topic: Custom Resolution
Replies: 7
Views: 2236

Custom Resolution

Hello, I want to setup a new custom resolution with CustomResolutionManager. The resolution should work like the Point-Resolution, but should calculate the boxsize dynamically. The boxsize should calculated depend on the marketprice. Simple like this: boxsize = marketprice * factor / 100. The variab...
by signalworks
09 Jan 2019
Forum: MultiCharts
Topic: WFO Questions
Replies: 1
Views: 823

WFO Questions

Hello, Got some questions on the Walkforward test: I made the following settings: -Number of runs: 1, OOS % of first Run: 8 (IS ~10 years, OOS 1,5 year) -Set robustness Settings: MaxDrawDown <= 600 -> without a specification for these settings, "No Data" is displayed directly (MultiCharts64 Version ...
by signalworks
24 Jul 2018
Forum: MultiCharts
Topic: Deviation in daily period analysis v12 (Build 16179)
Replies: 4
Views: 1368

Re: Deviation in daily period analysis v12 (Build 16179)

Hello, Is the Daily Period Analysis overview somewhere adjustable (or is there another totals daily order overview) so that only trades based on exit minus entry (and costs) are listed there? For overnight positions, it is known that current positions are calculated up to session close. And from a n...
by signalworks
22 Jun 2018
Forum: MultiCharts
Topic: Point and Figure problem and suggestion
Replies: 13
Views: 3026

Re: Point and Figure problem and suggestion

yet a wish: Please make the type CandleStick available for P&F under FormatInstrument->Style->ChartType. And as desired by other users: Candles including wicks would be the perfect addition.
by signalworks
22 Jun 2018
Forum: MultiCharts
Topic: Point and Figure problem and suggestion
Replies: 13
Views: 3026

Re: Point and Figure problem and suggestion

Thanks,Anna. Your point 2 is exactly what I need. The session should be interrupted, as is the case in regular charts. (I need the real gap). In addition, the trend of the previous day is to remain valid if necessary, provided that the direction continues. It is basically simple from the arithmetic:...
by signalworks
18 Jun 2018
Forum: MultiCharts
Topic: Please vote: Build a charttype via script [SOLVED]
Replies: 5
Views: 1584

Re: Please vote: Build a charttype via script [SOLVED]

oops, not seen yet. Great! Thank you very much! Is there access to the SessionEndTime (for SessionBreak...) in this API? Haven't found anything in the sample scripts. Is there any doc about this API? Thanks.
by signalworks
18 Jun 2018
Forum: MultiCharts
Topic: Point and Figure problem and suggestion
Replies: 13
Views: 3026

Re: Point and Figure problem and suggestion

concluding in one sentence, which is my requirement here:
With the "Break on Session" option activated, the BoxSize should be calculated exactly the same as without the "Break on Session" option activated, except for the gap display. :-)
by signalworks
18 Jun 2018
Forum: MultiCharts
Topic: Point and Figure problem and suggestion
Replies: 13
Views: 3026

Re: Point and Figure problem and suggestion

thanks, Anna. Yes, but this is not unique enough for me. With "Break on Session", this first initial calculation works against my BoxSize setting. Here the calculation should be continued exactly as before with the boxsize. (my suggestion). Therefore, a second X series can also be created at the sta...
by signalworks
18 Jun 2018
Forum: MultiCharts
Topic: Please vote: Build a charttype via script [SOLVED]
Replies: 5
Views: 1584

Re: Please vote: Build a charttype via script [SOLVED]

Briefly to the reason why I need it: with the indicator values (chart below) I can already implement what I need (I feed the strategy with the corresponding calculated values and virtually simulate a new chart type). For backtesting, however, it would make sense to generate a chart directly that cor...
by signalworks
18 Jun 2018
Forum: MultiCharts
Topic: Please vote: Build a charttype via script [SOLVED]
Replies: 5
Views: 1584

Please vote: Build a charttype via script [SOLVED]

Hi, many have very individual requirements on certain chart types. MC already has a large number of types. It would be most flexible if you could program your own chart type via script. Please vote for this flexible option! Thank you very much! https://www.multicharts.com/pm/public/multicharts/issue...
by signalworks
18 Jun 2018
Forum: MultiCharts
Topic: Point and Figure problem and suggestion
Replies: 13
Views: 3026

Re: Point and Figure problem and suggestion

Thank you, Anna, for this explanation. It's basically clear to me. The crux of the matter is the session transition. Without the "Break on Session" option activated, the p&f chart display is correct. However, if the "Break on Session" option is activated, the first p&f bar is not correct. I have cre...
by signalworks
18 Jun 2018
Forum: MultiCharts
Topic: Deviation in daily period analysis v12 (Build 16179)
Replies: 4
Views: 1368

Re: Deviation in daily period analysis v12 (Build 16179)

In addition to the above: the deviation in v12 is no longer present if the "Break on Session" option is activated in the p&f-chart settings. However, the variance is unlikely to exist even without activating the option, since the individual trade results are the same, but have been cumulated differe...
by signalworks
18 Jun 2018
Forum: MultiCharts
Topic: Deviation in daily period analysis v12 (Build 16179)
Replies: 4
Views: 1368

Deviation in daily period analysis v12 (Build 16179)

Hi, Compared to version 11, I noticed a discrepancy in the calculation of the DailyPeriodAnalysis. I used two charts with different charttypes (point and p&f), both of which should give the same results. In v11 this works exactly (see pic "11.0 Release (Build 16148)_dailySum_exactly matched.png"). I...
by signalworks
06 Jun 2018
Forum: MultiCharts
Topic: Point and Figure problem and suggestion
Replies: 13
Views: 3026

Re: Point and Figure problem and suggestion

Thank you for the explanation. Exactly, wick + fuse + real open + real close are my wish. I voted for the PM entry. But I don't understand this sentence: "The type of the box is determined by the direction of the first two ticks: if the second tick is higher, then the box will be an X-box, if the se...
by signalworks
31 May 2018
Forum: MultiCharts
Topic: trade closed in the same bar .. was it long or short?
Replies: 6
Views: 2257

Re: trade closed in the same bar .. was it long or short?

shivax, Another possibility: if you name your entries that way: buy ("PosName_Long") ... sell short ("PosName_Short")... then you can use PosTradeEntryName(PosAgo,TradeNumber) Where: PosAgo - a numerical expression, specifying the position: 0 - open position; 1 - one position back (the last position...
by signalworks
31 May 2018
Forum: MultiCharts
Topic: Point and Figure problem and suggestion
Replies: 13
Views: 3026

Point and Figure problem and suggestion

Hi, I discovered an inconsistency when changing sessions that looks like a mistake to me. My settings: Resolution 1 tick | BoxSize 3000 | Reversal 1 It is displayed correctly in the two screens pf_01_#: In pf_01_sessionEnd the High/Low is 24.030. In pf_01_sessionOpen the SessionOpen is 24.060 and th...
by signalworks
04 May 2018
Forum: MultiCharts
Topic: Running out of Memory Alert 32Bit-Version
Replies: 9
Views: 2837

Re: Running out of Memory Alert 32Bit-Version

Hello Anna, I have updated the post above. Thanks.
by signalworks
04 May 2018
Forum: MultiCharts
Topic: Running out of Memory Alert 32Bit-Version
Replies: 9
Views: 2837

Re: Running out of Memory Alert 32Bit-Version

Thanks again, TJ. What I don't understand, MC32 takes even 26MB, in sum with its other components ~35MB. The alert still appears. The Monitor-Entry in the registry is set at 1500 by default. If 1500 is reached, then would be appears the alert? It comes too soon obviously?

regards
by signalworks
04 May 2018
Forum: MultiCharts
Topic: Running out of Memory Alert 32Bit-Version
Replies: 9
Views: 2837

Re: Running out of Memory Alert 32Bit-Version

Hi TJ, thanks. I have to send signals to a third (32bit-)platform via dll. The dll have to be an 32bit-dll... Now, it is not a solution with this memory-problem. Is there any way to use a 32bit-dll with 64bit-MC? That would be the solution. Thanks.

regards
by signalworks
03 May 2018
Forum: MultiCharts
Topic: Running out of Memory Alert 32Bit-Version
Replies: 9
Views: 2837

Running out of Memory Alert 32Bit-Version

Hello, I have installed the 32-Bit-version MultiCharts Version 11.0 Release (Build 15806) and using 2 workspaces with each 4 Charts. Each charts gets data from TS and shows Rangebars for two month history. MC take round about 1GB RAM. I have 32GB available. MC shows permanently the Alert of "running...
by signalworks
09 Jun 2017
Forum: MultiCharts
Topic: Strategy calculating progress/note missing
Replies: 1
Views: 1808

Strategy calculating progress/note missing

Hi, while loading an indicator to a chart, in the above text-line one can see a "calculating..."-note. But not so for strategies. The same after format strategy an recalculating. That would be fine to see a note for that, especially for longterm calculations, i.e. with the BarMagnifier-Option. Thank...
by signalworks
09 Jun 2017
Forum: MultiCharts
Topic: Optimization Search Properties Dialog - false values
Replies: 3
Views: 1277

Re: Optimization Search Properties Dialog - false values

Hi Kristina,
here comes the pics. Thanks.

regards,
sw
by signalworks
18 May 2017
Forum: MultiCharts
Topic: Optimization Search Properties Dialog - false values
Replies: 3
Views: 1277

Optimization Search Properties Dialog - false values

Hello, I observed a problem with values in the Exhaustive/Genetic Search Properties Dialog (MultiCharts64 Version 10.0 Release (Build 14322)). This problem was already described here (User MC_prog at 05 February 2013): https://www.multicharts.com/discussion/viewtopic.php?f=1&t=12109&p=58821&hilit=ex...
by signalworks
02 May 2017
Forum: MultiCharts
Topic: Pre-loop a chart [SOLVED]
Replies: 16
Views: 3790

Re: Pre-loop a chart [SOLVED]

Hello Helmut, In 2010 the last trading day in SPY was on Friday 05/28, in 2013 Thursday 03/28. In this cases a modification is required. The 2010/05/31 was the Memorial Day in USA. The 2013/03/28 was the Good Friday. http://www.wincalendar.com/Holiday-Calendar/May-2010 http://www.wincalendar.com/Hol...
by signalworks
28 Apr 2017
Forum: MultiCharts
Topic: Pre-loop a chart [SOLVED]
Replies: 16
Views: 3790

Re: Pre-loop a chart [SOLVED]

Hi Massimo, thank you for your solution. That works too and with less code (but ;-) why simple, if it can do complicated :wink: :lol: ) please check your code, maybe the conditions in the switch-cases are not correct. The code related #wd is correct, because #wd is the calculated dayOfWeek of the la...
by signalworks
26 Apr 2017
Forum: MultiCharts
Topic: Pre-loop a chart [SOLVED]
Replies: 16
Views: 3790

Re: Pre-loop a chart [SOLVED]

Hi again, I need the info: today is the last trading day of a month. (not a day later on beginning of the new month). My solution is running over a date-calculation (except holidays), that calculates the weekday of the last day of month and if necessary (weekend) recalculates the last session day as...
by signalworks
19 Apr 2017
Forum: MultiCharts
Topic: Pre-loop a chart [SOLVED]
Replies: 16
Views: 3790

Pre-loop a chart [SOLVED]

Hello, is it possible to pre-loop a complete chart and start a final calculation after that? Idea: I need the lastDayOfWeek, lastDayOfMonth and lastDayOfYear for a calculation. I can calc that with i.e. dayOfMonth(date) < dayofMonth(date[1]). Here I need the value a day earlier ( at the lastDayOfWee...
by signalworks
02 Mar 2017
Forum: MultiCharts
Topic: Reset Stop or Limit [SOLVED]
Replies: 5
Views: 1484

Re: Reset Stop or Limit [SOLVED]

Hi TJ, sorry for my explanation. Using a 1-tickchart. On the next tick, the signal would be generated. Is there a trick, to prevent the signal on this tick, if condition2 (see above) will be true on this tick. A check on the tick before the signal-tick works, but I want to check a condition also on ...
by signalworks
02 Mar 2017
Forum: MultiCharts
Topic: Reset Stop or Limit [SOLVED]
Replies: 5
Views: 1484

Re: Reset Stop or Limit [SOLVED]

Hi TJ, like this (Pseudo)Code: //SET ENTRYLEVEL If condition1 then entry_level = level; //RESET ENTRYLEVEL TO PREVENT A SIGNAL BECAUSE OF CONDITION2 if c >= entry_level and condition2 then entry_level = 0; //ENTRYBAR if entry_level > 0 then sell short next bar at entry_level limit; If the entry_leve...
by signalworks
02 Mar 2017
Forum: MultiCharts
Topic: Alt+Right/Left arrow and Alt+Ctrl+Right/Left Arrow.
Replies: 12
Views: 6062

Re: Alt+Right/Left arrow and Alt+Ctrl+Right/Left Arrow.

Hi,
is it possible to adjust the speed of the scrollbar? Its too fast in my opinion.

Thanks.

Regards.
by signalworks
01 Mar 2017
Forum: MultiCharts
Topic: Reset Stop or Limit [SOLVED]
Replies: 5
Views: 1484

Reset Stop or Limit [SOLVED]

Hello,

my logic orders next bar at limit/stop. How can I cancel/reset the limit/stop at the bar/tick where the level would be reached? A reset at the tick before works, but no more when the level is reached.
Thanks.

Regards.
by signalworks
04 Mar 2016
Forum: MultiCharts
Topic: Bars Since Entry issues in portfolio backtester
Replies: 8
Views: 3053

Re: Bars Since Entry issues in portfolio backtester

Hi Josh, thanks. Not a problem, to work with barsSinceEntry in other cases than in "period"-scenarios (like highest(h, barsSinceEntry). In Period-Scenarios, seems it have to go "by feet": I.e. to get the distance highestHigh - lowestLow since entry, determine high (hh) and low(ll) at entry, change t...
by signalworks
04 Mar 2016
Forum: MultiCharts
Topic: Bars Since Entry issues in portfolio backtester
Replies: 8
Views: 3053

Re: Bars Since Entry issues in portfolio backtester

Hi, it seems, it is a general problem with barsSinceEntry and MaxbarsBack. Unfortunately, Fredi's solution is not practical... When I want to check large positions with more bars as defined in MaxBarsBack, it can only check i.e. highest(h, MaxbarsBack). TJ's solution works, but eats code-lines... Th...
by signalworks
15 Oct 2015
Forum: MultiCharts
Topic: CPU Usage During Optimization
Replies: 9
Views: 22605

Re: CPU Usage During Optimization

Hello Henry,
yes, same strategy in this case. But that is independent, with other strategies it is the same effect.
Maybe there is a hint with changing chartsettings or create a new one/new workspace. I will try something with it.

regards,
Lutz
by signalworks
12 Oct 2015
Forum: MultiCharts
Topic: Statusline - status of studies
Replies: 5
Views: 1846

Re: Statusline - status of studies

The point is, if I have 20 loaded indicators and even as many strategies (for testing purposes), the statusline needs a lot place above the chart. To load all seperately would be a roundabout way in this case. So the thought, to hide them from the statusline but not completely delete from the chart.
by signalworks
12 Oct 2015
Forum: MultiCharts
Topic: CPU Usage During Optimization
Replies: 9
Views: 22605

Re: CPU Usage During Optimization

sorry, uncleared expressed, should called above: "while optimization".
Thanks.
by signalworks
12 Oct 2015
Forum: MultiCharts
Topic: Statusline - status of studies
Replies: 5
Views: 1846

Re: Statusline - status of studies

thanks, Arnie!
Activate/deactive (and greyed out) with a click on it works. I thought to an option, to clear the statusline from deactivated indicators, but not delete it completely. (new activation via format->indicators...)...quasi a third state: active/inactive (greyed-out)/off (hidden).
by signalworks
12 Oct 2015
Forum: MultiCharts
Topic: Observations and workarounds for Genetic Optimizations..
Replies: 7
Views: 2172

Re: Observations and workarounds for Genetic Optimizations..

Hello Dave,

I discovered, that the count of generations and population is different from time to time (after a few optimizations or after restart of MC) with the same parameters and settings. What is the reason?

Thanks.

best regards,
Lutz
by signalworks
12 Oct 2015
Forum: MultiCharts
Topic: Statusline - status of studies
Replies: 5
Views: 1846

Statusline - status of studies

Hello,

can one see the state of the contained studies in the statusline? If I set a status to "off", the study is still showing in the statusline. Rather it could be also hidden there or marked as "off" (better hidden).

Thanks,

regards,
Lutz
by signalworks
12 Oct 2015
Forum: MultiCharts
Topic: CPU Usage During Optimization
Replies: 9
Views: 22605

Re: CPU Usage During Optimization

Dear MC-Team, I use the MultiCharts64 Version 9.0 Release (Build 11210) on Win7/64Bit and have problems with using all cores while backtesting. I have installed your Registry-hack "All_Thread_ForOptimize.reg". This works fine, if MC is new started. But after some tests (I could not determine a defin...
by signalworks
03 Jun 2014
Forum: MultiCharts
Topic: Plot text in scanner column based on conditions [SOLVED]
Replies: 10
Views: 2782

Re: Plot text in scanner column based on conditions [SOLVED]

Hello Henry,

Thank you, founded the "Use Custom Data Range"-Settings :-) I would like to set a range from a specific start date to a specific end date. Founded only Settings for "Days back/BarsBack". Is that possible?

Thanks & regards.
by signalworks
02 Jun 2014
Forum: MultiCharts
Topic: Plot text in scanner column based on conditions [SOLVED]
Replies: 10
Views: 2782

Re: Plot text in scanner column based on conditions [SOLVED]

Hello, I have a requirement to show the first date of an instrument in a seperate column of a scanner-window. Is that possible? The following code shows only the last date of an Instrument (supposely "currentbar = 1" is not possible here?): vars: fDate(""); if currentbar = 1 then begin fDate = NumTo...
by signalworks
23 May 2014
Forum: MultiCharts
Topic: Compiled with error(s): [SOLVED]
Replies: 17
Views: 6726

Re: compile error:"line 0, column 0" [SOLVED]

Here my specific solution for the same Compiler error: I have wrote a function with a few numericArrayRef's. The first compile was failed (error was finding simple). As all simple errors was corrected, the error #compile error:"line 0, column 0" still persists. Thougth, perhaps it could in context o...
by signalworks
29 Apr 2014
Forum: MultiCharts
Topic: More than 99 conditions
Replies: 3
Views: 1145

Re: More than 99 conditions

Hi JoshM and TJ, thanks for your advices. Setting conditions in the variables is a way with more code yet ;-) When I turn syntax-highlighting off, I can't set the comments in green. All code appears in dark Grey. Do you mean: Syntax-Highlight ON and all settings to black except comments? Because of ...
by signalworks
29 Apr 2014
Forum: MultiCharts
Topic: More than 99 conditions
Replies: 3
Views: 1145

More than 99 conditions

Hi, (1) it would be great, if you can provide more than condition1-condition99 in powerlanguage. (2) even too provide the Switch()-statement (3) when the count of code-line is up to approx. 3000, the handling of power-Editor is quite slowly. I have turned of the "automatic Features" und "use syntax-...
by signalworks
11 Feb 2014
Forum: MultiCharts
Topic: A few simple suggestions
Replies: 12
Views: 5207

Input-Parameter-Names missing in Performance-Report-Settings

Hello,
(1) all the input-parameter-names are missing under "settings" in the performance-report. Only the values of the parameters are listed...
(2) Please, insert a new Column "Modified" in the "Insert Study"-Dialog (to avoid much scrolling...)

Thanks!

Go to advanced search