Hi,
I have just installed 8.5 beta after using 8.0.
When opening the .NET solution in VS, and performing a build I get the following errors and warnings.
Errors 1-3 appear to be breaking changes (from upgrade of 8.0 to 8.5 beta) relating to those indicators.
The warnings were present after compiling the 8.0 solution also.
Warnings 8-17 and 22-26 relate to using a fixed path in the reference.
Warnings 4-7 and 18-21 are obviously reference related. My references include the ones mentioned here and they appear to be listed twice in the VS ref section. (They have yellow warning triangles indicating a missing ref, but then are immediately listed below without the triangle so I don't have compilation issues as a result).
1. May I suggest the fixed paths in the VB project are changed to relative paths instead.
2. May I also suggest that all of these issues are corrected so that the released product does not contain any errors or warnings on an initial build. This means any warnings or errors we do receive after compilation are genuine and a result of our own code.
Thanks,
Ed
VS 2010 Errors and Warnings:
Error 1 The type or namespace name 'RateOfChange' could not be found (are you missing a using directive or an assembly reference?) C:\ProgramData\TS Support\MultiCharts .NET64\StudyServer\Techniques\CS\Pcnt_Decrease.Indicator.CS 16 17 PLStudies2010
Error 2 The type or namespace name 'RateOfChange' could not be found (are you missing a using directive or an assembly reference?) C:\ProgramData\TS Support\MultiCharts .NET64\StudyServer\Techniques\CS\Pcnt_Increase.Indicator.CS 16 17 PLStudies2010
Error 3 The type or namespace name 'PercentChange' could not be found (are you missing a using directive or an assembly reference?) C:\ProgramData\TS Support\MultiCharts .NET64\StudyServer\Techniques\CS\PcntChg.Indicator.CS 17 17 PLStudies2010
Warning 4 The referenced component 'System' could not be found.
Warning 5 The referenced component 'System.Data' could not be found.
Warning 6 The referenced component 'System.Xml' could not be found.
Warning 7 The referenced component 'System.Core.dll' could not be found.
Warning 8 Assembly strong name "c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLTypes.dll" is badly formed. It may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('), Backslash(\). PLStudiesVB2010
Warning 9 Assembly strong name "c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLStudiesProxy.dll" is badly formed. It may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('), Backslash(\). PLStudiesVB2010
Warning 10 Assembly strong name "c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLBuiltInFunctions.dll" is badly formed. It may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('), Backslash(\). PLStudiesVB2010
Warning 11 Assembly strong name "c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLTradeManager.dll" is badly formed. It may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('), Backslash(\). PLStudiesVB2010
Warning 12 Assembly strong name "c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\ATCenterProxy.interop.dll" is badly formed. It may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('), Backslash(\). PLStudiesVB2010
Warning 13 Assembly strong name "c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLTypes.dll" is badly formed. It may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('), Backslash(\). PLStudiesVB2010
Warning 14 Assembly strong name "c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLStudiesProxy.dll" is badly formed. It may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('), Backslash(\). PLStudiesVB2010
Warning 15 Assembly strong name "c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLBuiltInFunctions.dll" is badly formed. It may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('), Backslash(\). PLStudiesVB2010
Warning 16 Assembly strong name "c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLTradeManager.dll" is badly formed. It may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('), Backslash(\). PLStudiesVB2010
Warning 17 Assembly strong name "c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\ATCenterProxy.interop.dll" is badly formed. It may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('), Backslash(\). PLStudiesVB2010
Warning 18 The referenced component 'System' could not be found.
Warning 19 The referenced component 'System.Data' could not be found.
Warning 20 The referenced component 'System.Xml' could not be found.
Warning 21 The referenced component 'System.Core.dll' could not be found.
Warning 22 The referenced component 'c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLTypes.dll' could not be found.
Warning 23 The referenced component 'c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLStudiesProxy.dll' could not be found.
Warning 24 The referenced component 'c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLBuiltInFunctions.dll' could not be found.
Warning 25 The referenced component 'c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\PLTradeManager.dll' could not be found.
Warning 26 The referenced component 'c:\WorkSVN\trunk_x64\Components\bin64\MC_Release\ATCenterProxy.interop.dll' could not be found.
Visual Studio errors and warnings with 8.5 beta [SOLVED]
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2958 times
Re: Visual Studio errors and warnings with 8.5 beta [SOLVED]
1-3) Pcnt_Decrease, Pcnt_Increase and PcntChg studies were renamed in MultiCharts 8.5 beta.
You should have newly added and compiled Percent_Decrease, Percent_Increase and PercentChg studies in the list.
If you have them - you can delete obsolete Pcnt_Decrease, Pcnt_Increase and PcntChg studies.
You can just ignore the warnings 4-7 and 18-21.
Regarding the 8-17 and 22-26 warnings-we will fix them in the next version of MultiCharts .Net
You should have newly added and compiled Percent_Decrease, Percent_Increase and PercentChg studies in the list.
If you have them - you can delete obsolete Pcnt_Decrease, Pcnt_Increase and PcntChg studies.
You can just ignore the warnings 4-7 and 18-21.
Regarding the 8-17 and 22-26 warnings-we will fix them in the next version of MultiCharts .Net