Are there any plans to incorporate the Zen-Fire data feed?
Thanks.........
Zen-Fire Data Feed [SOLVED]
- Alex Kramer
- Posts: 834
- Joined: Feb 23 2006
We aren't really acquainted with that data source so there's no plans to include it now; could you please share some information on Zen-Fire and post it to the features request thread? (http://forum.tssupport.com/viewtopic.php?t=938)
We will consider adding this if there's enough user demands; if that data source supports DDE, you can already use its realtime data.
We will consider adding this if there's enough user demands; if that data source supports DDE, you can already use its realtime data.
There aren't really much information about it. Their website is www.zen-fire.com, but is pretty much empty without any contact information.
However, several brokers are offering it now to trade through. It is extremely fast and one does not experience lagging feeds like with e-signal for example if the market becomes really fast.
NT has an option available to feed their data and charts and obviously to make trades to the brokers which support the zen-fire connection. If NT can use them, they must be having some kind of API which MC probably can use as well. Unfortunately, I have no idea how to get hold of the zen-fire people, but this will be nice if MC can make use of them.
- Fanus
However, several brokers are offering it now to trade through. It is extremely fast and one does not experience lagging feeds like with e-signal for example if the market becomes really fast.
NT has an option available to feed their data and charts and obviously to make trades to the brokers which support the zen-fire connection. If NT can use them, they must be having some kind of API which MC probably can use as well. Unfortunately, I have no idea how to get hold of the zen-fire people, but this will be nice if MC can make use of them.
- Fanus
- RobotMan
- Posts: 375
- Joined: Jul 12 2006
- Location: Los Altos, California, USA
- Has thanked: 31 times
- Been thanked: 13 times
- Contact:
I just wanted to bring this issue back up again.
Anyone that uses NT probably has heard of Zen-Fire data engine by now. I use it in my trading through Mirus Futures (an IB of Dorman Trading). It is very fast and does not get bogged down in fast markets. I tried searching on how to get the data feed into the Quote Manager, but I could not find anything except this one thread.
Can you re-visit this issue? Will it be possible to use the same data feed to NT to feed into MC?
Thanks,
Bob Perry
Los Altos, CA
Anyone that uses NT probably has heard of Zen-Fire data engine by now. I use it in my trading through Mirus Futures (an IB of Dorman Trading). It is very fast and does not get bogged down in fast markets. I tried searching on how to get the data feed into the Quote Manager, but I could not find anything except this one thread.
Can you re-visit this issue? Will it be possible to use the same data feed to NT to feed into MC?
Thanks,
Bob Perry
Los Altos, CA
-
- Posts: 2
- Joined: Dec 10 2007
I know several people that would benefit using Zen-fire with Multi charts
Please consider this request
Thank You
Please consider this request
Thank You
- Marina Pashkova
- Posts: 2758
- Joined: Jul 27 2007
We will consider this suggestion. However, in the nearest future, we are planning to add more popular brokers.
Regards.
Regards.
-
- Posts: 2
- Joined: Dec 10 2007
Marina,
Thank you for your response.
Would you be willing to give us a list of the data feed providers or brokers you are considering?
Thank you for your response.
Would you be willing to give us a list of the data feed providers or brokers you are considering?
- RobotMan
- Posts: 375
- Joined: Jul 12 2006
- Location: Los Altos, California, USA
- Has thanked: 31 times
- Been thanked: 13 times
- Contact:
NT is not a broker, it is a popular order entry front end.
Zen-Fire is one of the fastest order entry/data feeds.
Mirus Futures just happens to support NT w/ ZenFire for their clients.
Just like Infinity has endorsed another (albeit, inferior, in my opinion) front end but gives kickbacks to vendors that send clients their way. I actually pay $50/mo for NT. I used to use Patsystems, but NT is much better IMO.
NT has long stood on it's own as a first rate order entry front end and I was just wondering how to get Zen-Fire data into QuoteManager. So, from what it sounds like, I guess that's off the table.
Bob Perry
Los Altos, CA
Zen-Fire is one of the fastest order entry/data feeds.
Mirus Futures just happens to support NT w/ ZenFire for their clients.
Just like Infinity has endorsed another (albeit, inferior, in my opinion) front end but gives kickbacks to vendors that send clients their way. I actually pay $50/mo for NT. I used to use Patsystems, but NT is much better IMO.
NT has long stood on it's own as a first rate order entry front end and I was just wondering how to get Zen-Fire data into QuoteManager. So, from what it sounds like, I guess that's off the table.
Bob Perry
Los Altos, CA
- Marina Pashkova
- Posts: 2758
- Joined: Jul 27 2007
In my previous post I was referring to Zen-Fire - since Frank was talking about getting Zen-Fire to work with MultiCharts. According to our information, it is both a datafeed and a system for order execution.
We are not planning to add Zen-Fire in the nearest future.
Best regards.
We are not planning to add Zen-Fire in the nearest future.
Best regards.
TSS,
please consider adding the ZenFire Feed to your choices of supported datafeeds. Zen Fire is rock solid & even a bit faster than Transacts AT feed, in other words a must have, if only for backup reasons.
imho a very worthwhile option for all MC users!
Thanks for considering it & good sunday,
cosmic
please consider adding the ZenFire Feed to your choices of supported datafeeds. Zen Fire is rock solid & even a bit faster than Transacts AT feed, in other words a must have, if only for backup reasons.
imho a very worthwhile option for all MC users!
Thanks for considering it & good sunday,
cosmic
- Marina Pashkova
- Posts: 2758
- Joined: Jul 27 2007
Hi cosmic,
We have already contacted ZenFire about their data feed and have been promised their API. We haven't received the API yet. But we believe we'll be able to add this data feed within the next few months.
We have already contacted ZenFire about their data feed and have been promised their API. We haven't received the API yet. But we believe we'll be able to add this data feed within the next few months.
- Marina Pashkova
- Posts: 2758
- Joined: Jul 27 2007
Hi RobotMan,
A lot has changed since we discussed Zen-Fire last time. We have received many requests from our customers to add this datafeed and decided that we should start working in that direction.
A lot has changed since we discussed Zen-Fire last time. We have received many requests from our customers to add this datafeed and decided that we should start working in that direction.
-
- Posts: 3
- Joined: Sep 03 2007
Marina...
You make me a happy man. My trial of Zen-Fire (via Mirus Futures) has shown excellent performance, not just real-time tick but chart load / refresh as well (very fast). It would be wonderful to finally be able to use the Zen-Fire data feed with MultiCharts.
Does TS Support plan to implement trade execution direct to Zen-Fire?
Kind regards,
Stephen Turner
You make me a happy man. My trial of Zen-Fire (via Mirus Futures) has shown excellent performance, not just real-time tick but chart load / refresh as well (very fast). It would be wonderful to finally be able to use the Zen-Fire data feed with MultiCharts.
Does TS Support plan to implement trade execution direct to Zen-Fire?
Kind regards,
Stephen Turner
- RobotMan
- Posts: 375
- Joined: Jul 12 2006
- Location: Los Altos, California, USA
- Has thanked: 31 times
- Been thanked: 13 times
- Contact:
That would be so awesome Stephen! I second the emotion.
I use Multicharts/powerlanguage for charting and then I "chart trade" off of NT/ZenFire thru Mirus. I am contemplating having someone port my indicators and studies over to C# (Ninjascript) so that I am not looking at so much "stuff" while I trade. But then I lose control of quickly trying new things which I can easily do in MC (which I would hate to give up).
I love the NT ATM and I also use a lot of real time depth of market (all 5 levels) studies that forces me to use both programs because MC can't do a lot of what NT can do (and visa-versa).
Maybe when MC 4.0 is released?! (just dreaming, Marina!)
Bob Perry
Los Altos, Ca
I use Multicharts/powerlanguage for charting and then I "chart trade" off of NT/ZenFire thru Mirus. I am contemplating having someone port my indicators and studies over to C# (Ninjascript) so that I am not looking at so much "stuff" while I trade. But then I lose control of quickly trying new things which I can easily do in MC (which I would hate to give up).
I love the NT ATM and I also use a lot of real time depth of market (all 5 levels) studies that forces me to use both programs because MC can't do a lot of what NT can do (and visa-versa).
Maybe when MC 4.0 is released?! (just dreaming, Marina!)
Bob Perry
Los Altos, Ca
- Marina Pashkova
- Posts: 2758
- Joined: Jul 27 2007
Hi Stephen,Marina...
You make me a happy man. My trial of Zen-Fire (via Mirus Futures) has shown excellent performance, not just real-time tick but chart load / refresh as well (very fast). It would be wonderful to finally be able to use the Zen-Fire data feed with MultiCharts.
Does TS Support plan to implement trade execution direct to Zen-Fire?
Kind regards,
Stephen Turner
We are definitely going to add Zen-Fire as a datafeed. As for adding it for direct trade executions, if we receive a lot of requests from our customer we wil consider supporting them as a broker as well.
Zen-fire feed is available through the FCM Dorman http://www.dormantrading.com/OnlineTrading/NT.aspx or it's introducing brokers including Mirus http://www.mirusfutures.com/ or http://www.ampfutures.com/
Dorman produces the feed which why it is only available from them and their IB's.Thanks Geoff!
But this firms are only distributors of this feed, correct?
But who is Zenfire?
Who generates/produces the Zenfire datafeed?
- TJ
- Posts: 7765
- Joined: Aug 29 2006
- Location: Global Citizen
- Has thanked: 1036 times
- Been thanked: 2232 times
that's good news.Hi RobotMan,
A lot has changed since we discussed Zen-Fire last time. We have received many requests from our customers to add this datafeed and decided that we should start working in that direction.
it is always good to have a backup datafeed.