MultiCharts: Trading Software for Automated Trading and Backtesting

Japhro

No, never. Nothing else I use does this, just MC and it does it often. It also loses connection to charts often, and the only solution is to restart MC

Japhro

No, everything shuts down correctly, then I go to launch MC then next day and nothing, opens a blank desktop with no workspaces.

Japhro

Yes, it should open the last setup but sometimes it doesn't, it has a mind of it's own sometimes

Japhro

All my studies on all my charts reset to hidden, and all needed to be manually reset afterwards. I hope this does not happen every time I restart MC.net Hello Japhro, This can happen if you have two StudyServer.NET.exe processes running. You need to exit the application without saving the workspace...

Japhro

All my studies on all my charts reset to hidden, and all needed to be manually reset afterwards. I hope this does not happen every time I restart MC.net

Japhro

Multicharts 10 and Windows 10 don't seem to get along without some tweaking, apparently Win 10 disables .NET 3.5 package which MC is reliant on

Japhro

I upgraded and now have no data with CQG, all settings look fine

Japhro

I wasn't a fan of the standard floor trader pivots indicator in MC.net so I had someone revamp it, it was a paid job, since I am not a programmer but I am happy to share it here. My contribution to the community, I suppose. The standard pivots had a dashed line, even if you selected line, the older ...

Japhro

My issue with Floor Trader Pivots is that they change the scaling of the chart drastically and then you have to manually rescale the chart to where it was before, and now you have to manually move the chart to keep current price within range always. its very inconvenient for an indicator to change c...

Japhro

Hello, MC is a decent basic platform for most things, but I'm often staggered by the things it lacks that many other platforms have natively. The TPO for example is provided by a user, there are few bar types and no custom versions, and many people have asked for these for many years now. I keep try...

Japhro

I feel that there are a lot of small improvements that could be done to the DOM, particularly on column sizing, width of the volume profile being static, with volume profile enabled the DOM takes up approx 610px which is too wide in my view, a lot of wasted space and the DOM should maximise number o...

Japhro

I will contact them again but frankly, this software has always been buggy for me, far more than I think is acceptable for a trading program where hundreds of thousands of dollars are on the line. Its a great piece of software when it works, but I have had 4-5 serious issues with it over the years, ...

Japhro

Hi, I was using a previous version for some time (2+ yrs) without too many issues, but the latest release has been nothing but a nightlmare, so much so that I have been using SC instead, but since I have to lease that continuously and I own MC.NET I thought that I would come back and try again. Same...

Japhro

There is definitely a bug on the positions history area, the dates get screwed up and if you select the From date it automatically selects the same date for you on the To date area, amongst the other glitch you mentioned. It takes forever (3-5 minutes at least) to login and retrieve data from Rithmi...

Japhro

Position history is not available in the new beta, and also order history is not available. I find the Beta very resource heavy, using almost 2x the RAM requirements and quite a bit slower than the previous release. I will be changing back today and wait for the bugs to get sorted out 1st

Japhro

That seems to work and is easier, thanks.

Japhro

I have been using this for a while, and I like it. A good basic TPO with volume and extensions for VAH and VAL. Thanks for this. I would like to mention an ongoing issue though, often when I start MC the workspace with TPO chart wont load the TPO, and I get an error message. I have to delete the stu...

Japhro

Any chance of doing a version of this for Camarilla Pivots? SC comes with at least 8 pivot formulas built in, we have 1. Cheers

Japhro

My wish would be for an autofib retracement/extension study with selectable period, for example previous day or week high/low as the basis for the retracement/extension, with user selectable levels. If anyone else sees value in this project we can make a feature request and maybe eventually they wil...

Japhro

I am trading several instruments, each within its own individual workspace, and prefer to set bracket orders for profit target and stop loss for each symbol. The bracket order preset on both the DOM and Chart Trading allows you to preset a # of ticks for each side but this cannot be set differently ...

Japhro

It is fine for me today, thanks Henry

Japhro

Mine is the same, no data to charts or Time and Sales, but the quotes are there in the chart trader buttons and the DOM is fine

Japhro

Hello,
Does anyone know if there are any Autofib studies/signals available for MC.NET? I haven't been able to find any. Also the EL version would be ok, could try to have someone recode
cheers - J

Japhro

Hello Henry,
Thanks for the reply. As far as creating an alert by using the drawing tool, I suppose you mean by using the horizontal line tool, then adding a price alert to this afterwards? Having a prebuilt price alert tool might be more helpful for traders.

Thanks

Japhro

I'm sure this isn't in the correct place but could not find where to post 2 feature requests for MC.Net version The first request is to have the ability to have in chart trading the Place Order and Exit Strategy icons open all the time, instead of as drop downs. Currently, these are both drop down m...

Japhro

Really great, this should have been an option on the software from the beginning, perfect for long candles and off bar types! Thanks

Japhro

Replied

Japhro

I have sent in crash reports at least 5 times, no replies to any so far.

My PC name is JaphyG-PC

Japhro

I have had multiple crashes (several per day) which I now believe are linked to the TPO study, which worked fine for me on version 8.8 (.net). Reverting to the 8.8 version is not viable given the changes in Rithmic routing and Multiple broker instances that are needed using 8.8 If I close the chart ...

Japhro

Your MCDumper fails, I followed your instructions perfectly

Japhro

Hello, I've been having this issue since I installed the 9.0 Beta 2 version, MC freezes 1-2 charts then won't close properly so that I can restart it. it closes about half of the workspaces then freezes. I have to close it out in Task Manager then restart it, but notice in task manager that there ar...

Japhro

Hello Japhro, It is expected behavior. I would suggest you to use 1 tick resolution for Renko charts. Please also see the following MC Wiki articles: https://www.multicharts.com/trading-software/index.php/Renko https://www.multicharts.com/trading-software/index.php/Intra-Bar_Order_Generation,_Bar_M...

Japhro

This is a better view of the problem. I have tried Tick data instead of time based also, but it changes the other indicators and studies' actions, which it shouldn't.

Japhro

Hello, I notice that in MC (I have the .Net latest version) that Renko bars are not only calculated by range but have a time component. This is a very serious flaw imo because Renko is not time dependent, the new bar is drawn only when the range that is set is exceeded in either direction. The way i...

Search found 34 matches

Re: MULTICHARTS .NET 10.0 BETA 2

Re: MULTICHARTS .NET 10.0 BETA 2

Re: MULTICHARTS .NET 10.0 BETA 2

Re: MULTICHARTS .NET 10.0 BETA 2

Re: MULTICHARTS .NET 10.0 BETA 2

Re: MULTICHARTS 10.0 BETA 2

Re: MULTICHARTS 10.0 BETA 2

Custom Floor Trader Pivots

Re: Pivot Point, R1, R2, S1 and S2 [SOLVED]

Re: Better Renko - Mean Renko - Renko Hybrid - Own bar types

Re: Custom DOM

Re: latest version locks up constantly [SOLVED]

latest version locks up constantly [SOLVED]

Re: MULTICHARTS .NET 9.1 BETA 1

Re: MULTICHARTS .NET 9.1 BETA 1

Re: TPO

Re: TPO

Re: Woodies Pivots

Re: Autofibs?

Individual Bracket order settings

Re: dom working but not charts

Re: dom working but not charts

Autofibs?

Re: Feature requests [SOLVED]

Feature requests [SOLVED]

Re: Horizontal Price Line

Re: 9.0 Beta 2 crashes [SOLVED]

Re: 9.0 Beta 2 crashes [SOLVED]

9.0 Beta 2 crashes [SOLVED]

Re: MC.Net 9.0 Beta 2 hangs and wont close properly

MC.Net 9.0 Beta 2 hangs and wont close properly

Re: Renko Flaw

Re: Renko Flaw

Renko Flaw