MULTICHARTS 7.4
MULTICHARTS 7.4
MultiCharts 7.4 present significant improvement and fine-tuning of major features that were developed in MultiCharts 7. Several smaller features were added and many bugs were fixed, improving stability, calculation accuracy and trading performance.
https://www.multicharts.com/traders-blog/?p=523
moderator's note:
New reserve words for MultiCharts 7
https://www.multicharts.com/traders-blog/?p=427
The list of new keywords to work with Accounts and Positions through PowerLanguage can be found in our blog: https://www.multicharts.com/traders-blog/?p=463
https://www.multicharts.com/traders-blog/?p=523
moderator's note:
New reserve words for MultiCharts 7
https://www.multicharts.com/traders-blog/?p=427
The list of new keywords to work with Accounts and Positions through PowerLanguage can be found in our blog: https://www.multicharts.com/traders-blog/?p=463
- JoshM
- Posts: 2195
- Joined: 20 May 2011
- Location: The Netherlands
- Has thanked: 1544 times
- Been thanked: 1565 times
- Contact:
Re: MULTICHARTS 7.4
Great christmas present.
Just wondering, will updating reset the QuoteManager settings like Custom Sessions, edited exchange settings or corrected symbol root settings?
Just wondering, will updating reset the QuoteManager settings like Custom Sessions, edited exchange settings or corrected symbol root settings?
Re: MULTICHARTS 7.4
I hope not! If it does reset them, we should at least be given instructions on how to export such settings form the previous release and import them into the new one.Great christmas present.
Just wondering, will updating reset the QuoteManager settings like Custom Sessions, edited exchange settings or corrected symbol root settings?
PS: Look forward to using the new version. Nice work.
Re: MULTICHARTS 7.4
Hi
I am getting the update notification in my multicharts 7.0. However when i click the link it downloads the same version rather than the 7.4.4906.
thanks
geoarb
I am getting the update notification in my multicharts 7.0. However when i click the link it downloads the same version rather than the 7.4.4906.
thanks
geoarb
- Attachments
-
- Capture.PNG
- (49.07 KiB) Downloaded 3751 times
Last edited by geoarb on 27 Dec 2011, edited 1 time in total.
Skipping identical ticks during calculations
With this new feature "Skipping identical ticks during calculations", does it mean even if volume changes the indicator will not re-calculate ?
i.e for indicators that makes decisions base on volume, we need to specifically turn this feature off ?
I think this feature should NOT be enabled by default.
thanks
i.e for indicators that makes decisions base on volume, we need to specifically turn this feature off ?
I think this feature should NOT be enabled by default.
thanks
-
- Posts: 742
- Joined: 09 Apr 2010
- Location: Texas
- Has thanked: 483 times
- Been thanked: 274 times
- Contact:
Re: MULTICHARTS 7.4
**********************************************************************Hi
I am getting the update notification in my multicharts 7.0. However when i click the link it downloads the same version rather than the 7.4.4906.
thanks
geoarb
** I just downloaded from this link and got the new version.
https://www.multicharts.com/trading-software-download/
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 7.4
Hello SP,Is there a quick way to update the holiday setup list or do i have to enter everything manually?
We will update the holiday list in the next version. At the moment you can add the holidays that you need manually.
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 7.4
Hello JoshM,Great christmas present.
Just wondering, will updating reset the QuoteManager settings like Custom Sessions, edited exchange settings or corrected symbol root settings?
Updating should not affect user data and preferences including Quote Manager settings.
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 7.4
geoarb,Hi
I am getting the update notification in my multicharts 7.0. However when i click the link it downloads the same version rather than the 7.4.4906.
thanks
geoarb
The link has been changed. Thank you for reporting.
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 7.4
Henrik,Where can I find a list of the "new" undocumented powerlanguage keywords?
Thank you!
Do you mean the list of keywods that have been added to PowerLanguage keyword reference?
You can find the list of these kewords here:
viewtopic.php?f=1&t=9206&p=44170&hilit= ... unt#p44170
The list of new keywords to work with Accounts and Positions through PowerLanguage can be found in our blog: https://www.multicharts.com/traders-blog/?p=463
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: Skipping identical ticks during calculations
aljafp,With this new feature "Skipping identical ticks during calculations", does it mean even if volume changes the indicator will not re-calculate ?
i.e for indicators that makes decisions base on volume, we need to specifically turn this feature off ?
I think this feature should NOT be enabled by default.
thanks
Yes, skipping identical ticks means if volume changes, but price is the same the indicator will not re-calculate. Your suggestion will be forwarded to the developers.
Re: MULTICHARTS 7.4
Error compile power language...sik!
------ Compiled with error(s): ------
Compile error
errLine 0, errColumn 0, errLineEnd 0, errColumnEnd 0
causal study: (Function)
28.12.11 22:43:01
------ Build started: ------
Study: "%Chg" (Indicator)
Please wait ....
------ Compiled with error(s): ------
Compile error
errLine 0, errColumn 0, errLineEnd 0, errColumnEnd 0
causal study: (Function)
------ Compiled with error(s): ------
Compile error
errLine 0, errColumn 0, errLineEnd 0, errColumnEnd 0
causal study: (Function)
28.12.11 22:43:01
------ Build started: ------
Study: "%Chg" (Indicator)
Please wait ....
------ Compiled with error(s): ------
Compile error
errLine 0, errColumn 0, errLineEnd 0, errColumnEnd 0
causal study: (Function)
- Attachments
-
- powe.gif
- (35.57 KiB) Downloaded 3721 times
-
- Posts: 742
- Joined: 09 Apr 2010
- Location: Texas
- Has thanked: 483 times
- Been thanked: 274 times
- Contact:
Re: MULTICHARTS 7.4
The "%chg" study works OK on my Win7 pc, is your function for "percentchange" verified ?
You might try doing a "verify all"..just to be sure..
You might try doing a "verify all"..just to be sure..
-
- Posts: 742
- Joined: 09 Apr 2010
- Location: Texas
- Has thanked: 483 times
- Been thanked: 274 times
- Contact:
Re: MULTICHARTS 7.4
*************************************************************************"all" studies give the same error windows vista home premium 64 bit .
Compile all with all the studies give error
That was a problem on an earlier version of MC, if you're using the current MC 7.4 , do a search for "compiling error" there is a fix for it.. (although it shouldn't happen with 7.4)
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 7.4
Please try to compile an empty study.Error compile power language...sik!
------ Compiled with error(s): ------
Compile error
errLine 0, errColumn 0, errLineEnd 0, errColumnEnd 0
causal study: (Function)
28.12.11 22:43:01
------ Build started: ------
Study: "%Chg" (Indicator)
Please wait ....
------ Compiled with error(s): ------
Compile error
errLine 0, errColumn 0, errLineEnd 0, errColumnEnd 0
causal study: (Function)
If you are still not able to do that - go to the Windows Start button –> Run. Check the contents of the file
"%allusersprofile%\Application Data\TS Support\MultiCharts\StudyServer\Studies\compiler_error.log"
Please attach the error message from this file for futher analysis.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 7.4
I was "zapping" between all the project management requests and I saw many not only being reviewed, but also with many votes and some quite old.
Since 7.4 final version has been released and none of those high votes requests were attended, I'd like to know when are you going to start to attend some of them?
Let me highlight the ones that have more votes so far:
MC-34
MC-59
MC-65
MC-124
MC-385
MC-390
MC-421
MC-423
MC-471
MC-473
MC-501
MC-504
MC-520
Regards,
Fernando
Since 7.4 final version has been released and none of those high votes requests were attended, I'd like to know when are you going to start to attend some of them?
Let me highlight the ones that have more votes so far:
MC-34
MC-59
MC-65
MC-124
MC-385
MC-390
MC-421
MC-423
MC-471
MC-473
MC-501
MC-504
MC-520
Regards,
Fernando
Re: MULTICHARTS 7.4
internal error in mingw32_gt_pch_use_address, at config/i386/host-mingw32.c:151: VirtualAlloc (commit): Tentativo di accedere ad un indirizzo non valido.Error compile power language...sik!
Please try to compile an empty study.
If you are still not able to do that - go to the Windows Start button –> Run. Check the contents of the file
"%allusersprofile%\Application Data\TS Support\MultiCharts\StudyServer\Studies\compiler_error.log"
Please attach the error message from this file for futher analysis.
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\INDICA~1\i_Prova.cpp:1: fatal error: can't read PCH file: Invalid argument
compilation terminated.
Re: Skipping identical ticks during calculations
Just another thought...aljafp,With this new feature "Skipping identical ticks during calculations", does it mean even if volume changes the indicator will not re-calculate ?
i.e for indicators that makes decisions base on volume, we need to specifically turn this feature off ?
I think this feature should NOT be enabled by default.
thanks
Yes, skipping identical ticks means if volume changes, but price is the same the indicator will not re-calculate. Your suggestion will be forwarded to the developers.
What if a tick that is supposed to trigger barstatus(1)=2 happens to be an identical tick ?
If this option is check... will the trigger be delayed ?
thanks
- furytrader
- Posts: 354
- Joined: 30 Jul 2010
- Location: Chicago, IL
- Has thanked: 155 times
- Been thanked: 217 times
Re: MULTICHARTS 7.4
Thank you for all of your hard work! This is great.
Looking forward to the 64 bit version too!
Looking forward to the 64 bit version too!
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 7.4
Hello fibdax,internal error in mingw32_gt_pch_use_address, at config/i386/host-mingw32.c:151: VirtualAlloc (commit): Tentativo di accedere ad un indirizzo non valido.
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\INDICA~1\i_Prova.cpp:1: fatal error: can't read PCH file: Invalid argument
compilation terminated.
To fix the issue:
1. Close MultiCharts AND PowerLanguage Editor
2. Download the following zip archive onto your machine and unpack it.
http://dl.dropbox.com/u/26968921/MakeGC ... er_155.zip
3. Run Updater.exe, click on Update, then when you see message ‘DONE’ click on Close. MultiCharts and PowerLanguage Editor should be closed while performing the update.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 7.4
Hi.
Every time I look at the DOM I'm always wishing to have a way to know how many trades were executed at each price.
I don't know if it's possible, but can we have a DOM that record all trades executed at each price, something similar to the attached image?
With a tool such as this we could easily see which prices are generating more business and knowing that, we could act in a more suitable way, depending naturally of our own trading strategy.
Regards.
Fernando
Every time I look at the DOM I'm always wishing to have a way to know how many trades were executed at each price.
I don't know if it's possible, but can we have a DOM that record all trades executed at each price, something similar to the attached image?
With a tool such as this we could easily see which prices are generating more business and knowing that, we could act in a more suitable way, depending naturally of our own trading strategy.
Regards.
Fernando
- Attachments
-
- DOM_total-trades.gif
- (29.75 KiB) Downloaded 3760 times
- JoshM
- Posts: 2195
- Joined: 20 May 2011
- Location: The Netherlands
- Has thanked: 1544 times
- Been thanked: 1565 times
- Contact:
Re: MULTICHARTS 7.4
Thank you MultiCharts, just smoothly updated from 7.0 to 7.4. I'm all set for 2012 now.
Re: MULTICHARTS 7.4
In previous versions, MultiCharts would remember the location of detached charts placed on multiple monitors. Now MultiCharts just stacks the detach charts on the primary monitor every time the workspace is opened. I must then drag and place each chart to its correct monitor and location.
I don't understand why this behavior was changed. Is there any way to change it back?
Tom
I don't understand why this behavior was changed. Is there any way to change it back?
Tom
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 7.4
That's strange since all my detach charts continue on the monitor on which they were at the time the workspace was saved.In previous versions, MultiCharts would remember the location of detached charts placed on multiple monitors. Now MultiCharts just stacks the detach charts on the primary monitor every time the workspace is opened. I must then drag and place each chart to its correct monitor and location.
I don't understand why this behavior was changed. Is there any way to change it back?
Tom
Re: MULTICHARTS 7.4
Hi dave,I applied the fix. The indicators are now completed. The compilation of signals not successful. Under what does the log fileHello fibdax,
To fix the issue:
1. Close MultiCharts AND PowerLanguage Editor
2. Download the following zip archive onto your machine and unpack it.
http://dl.dropbox.com/u/26968921/MakeGC ... er_155.zip
3. Run Updater.exe, click on Update, then when you see message ‘DONE’ click on Close. MultiCharts and PowerLanguage Editor should be closed while performing the update.
C:\DOCUME~1\ALLUSE~1\DATIAP~1\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_TestES.cpp: In member function `virtual void s_TestES::Body()':
C:\DOCUME~1\ALLUSE~1\DATIAP~1\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_TestES.cpp:55: error: `SavePricedOrder' undeclared (first use this function)
C:\DOCUME~1\ALLUSE~1\DATIAP~1\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_TestES.cpp:55: error: (Each undeclared identifier is reported only once for each function it appears in.)
this is signals
if time >900 then begin
buy("buy1") 1 contract next bar 1202 limit;
buy("buy2") 2 contract next bar at 1201 limit;
buy("buy3") 3 contract next bar at 1200 limit;
end;
if time >900 then begin
//sell next bar 1230 limit;
sellshort("sell1") 1 contract next bar 1212 limit;
//sell next bar 1231 limit;
sellshort("sell2") 2 contract next bar 1213 limit;
//sell next bar 1232 limit;
sellshort("sell3") 3 contract next bar 1214 limit;
end;
setexitonclose;
- JoshM
- Posts: 2195
- Joined: 20 May 2011
- Location: The Netherlands
- Has thanked: 1544 times
- Been thanked: 1565 times
- Contact:
Re: MULTICHARTS 7.4
I'm glad that the auto-fill menu now works with capital letters, but I don't like that it doesn't remember any more the last command you've used. Previously, when you had used "StdDevPAnnualized", you only had to press 's' and the auto-fill went to the "StdDevPAnnualized" function. Now, when you press 's' the auto-fill goes to the first (alphabetically) reserved word or function that starts with an 's'. This way, the recently used function or variable has to be retyped and retyped.
> Can we get that behaviour back, while retaining the usage of capital letters?
Perhaps the auto-fill suggestions can then also be turned off for numbers and in the Inputs and Variables sections, where it's more hindering than productive.
> Can we get that behaviour back, while retaining the usage of capital letters?
Perhaps the auto-fill suggestions can then also be turned off for numbers and in the Inputs and Variables sections, where it's more hindering than productive.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 7.4
Hi.
I'm having trouble with plotting text on a subchart.
The limits are set between 0.80 and -1.00, meaning that all text plotted above 0.80 and below -1.00 cannot be seen on the subchart.
Is there a way to expand the visible subchart area? I need to add 4 more text lines and I just can't find a way to make them visible since they fall outside the 0.80 and -1.00 range
Regards,
Fernando
I'm having trouble with plotting text on a subchart.
The limits are set between 0.80 and -1.00, meaning that all text plotted above 0.80 and below -1.00 cannot be seen on the subchart.
Is there a way to expand the visible subchart area? I need to add 4 more text lines and I just can't find a way to make them visible since they fall outside the 0.80 and -1.00 range
Regards,
Fernando
- Attachments
-
- text-on-subchart.gif
- (28.11 KiB) Downloaded 3713 times
Re: MULTICHARTS 7.4
I get wrong volume data using Zenfire data.
Open a daily chart for FESX0312 (same for FDAX0312 / FGBL0312 ) and add the standard volume and volume today indicators.
While the volume today indicator matches the volume displayed at the status line, the volume
indicator differs from both.
Open a daily chart for FESX0312 (same for FDAX0312 / FGBL0312 ) and add the standard volume and volume today indicators.
While the volume today indicator matches the volume displayed at the status line, the volume
indicator differs from both.
Re: MULTICHARTS 7.4
Maybe it dont understand it, but why dont you change under Format->Scaling->User definedII need to add 4 more text lines and I just can't find a way to make them visible since they fall outside the 0.80 and -1.00 range
the Maximum and Minimum values so that it plots all your text.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 7.4
How could I forgot that?Maybe it dont understand it, but why dont you change under Format->Scaling->User defined
the Maximum and Minimum values so that it plots all your text.
I'm constantly changing the charts scaling and I never thought on changing the indicator (subchart) scaling.
Shame on me...
Thanks SP.
Re: MULTICHARTS 7.4
Thank you for the reply, Arnie. I am using Windows XP SP3. Are you using a newer OS?That's strange since all my detach charts continue on the monitor on which they were at the time the workspace was saved.In previous versions, MultiCharts would remember the location of detached charts placed on multiple monitors. Now MultiCharts just stacks the detach charts on the primary monitor every time the workspace is opened. I must then drag and place each chart to its correct monitor and location.
I don't understand why this behavior was changed. Is there any way to change it back?
Tom
Tom
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 7.4
Yeah, I'm using Win 7 64 bits, but I don't think that is a Windows issue, though Windows is known for its issues...Thank you for the reply, Arnie. I am using Windows XP SP3. Are you using a newer OS?
Tom
- JoshM
- Posts: 2195
- Joined: 20 May 2011
- Location: The Netherlands
- Has thanked: 1544 times
- Been thanked: 1565 times
- Contact:
Re: MULTICHARTS 7.4
In previous versions, MultiCharts would remember the location of detached charts placed on multiple monitors. Now MultiCharts just stacks the detach charts on the primary monitor every time the workspace is opened. I must then drag and place each chart to its correct monitor and location.
No problem here with the detached windows on a two-monitor setup. I'm also running Windows 7 64bit Home edition. Does it also happen if you create a new/clean workspace?I'm using Win 7 64 bits, but I don't think that is a Windows issue, though Windows is known for its issues...
Re: MULTICHARTS 7.4
No problem here with the detached windows on a two-monitor setup. I'm also running Windows 7 64bit Home edition. Does it also happen if you create a new/clean workspace?
Yes, even with a newly built workspace it stacks all the charts on the primary monitor.
Re: MULTICHARTS 7.4
I modified the code in this way and does not workHello fibdax,
if time >900 then begin
buy("buy1") 1 contract next bar 1202 limit;
end;
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp: In member function `virtual void s_vuoto::Body()':
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp:54: error: `SavePricedOrder' undeclared (first use this function)
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp:54: error: (Each undeclared identifier is reported only once for each function it appears in.)
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 7.4
tosk,No problem here with the detached windows on a two-monitor setup. I'm also running Windows 7 64bit Home edition. Does it also happen if you create a new/clean workspace?
Yes, even with a newly built workspace it stacks all the charts on the primary monitor.
Please come to our Live Chat Mon-Fri from 6:30 AM to 1 PM EST for investigation: http://messenger.providesupport.com/mes ... pport.html
Re: MULTICHARTS 7.4
Is there anyone who has this problem?I modified the code in this way and does not workHello fibdax,
if time >900 then begin
buy("buy1") 1 contract next bar 1202 limit;
end;
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp: In member function `virtual void s_vuoto::Body()':
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp:54: error: `SavePricedOrder' undeclared (first use this function)
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp:54: error: (Each undeclared identifier is reported only once for each function it appears in.)
Is there a solution?
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 7.4
Hello Fibdax.I modified the code in this way and does not work
if time >900 then begin
buy("buy1") 1 contract next bar 1202 limit;
end;
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp: In member function `virtual void s_vuoto::Body()':
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp:54: error: `SavePricedOrder' undeclared (first use this function)
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp:54: error: (Each undeclared identifier is reported only once for each function it appears in.)
Is there anyone who has this problem?
Is there a solution?
Please install the following updater to fix the issue:
1. Close MultiCharts AND PowerLanguage Editor
2. Download the following zip archive onto your machine and unpack it to a new folder.
http://dl.dropbox.com/u/27918922/MakeGC ... 155_74.zip
3. Run Updater.exe, click on Update, then when you see message ‘DONE’ click on Close. MultiCharts and PowerLanguage Editor should be closed while performing the update.
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 7.4
Hello Ulich05.for some reason i cant download the new version from the site, hang up on my User Id field, my registration name and registration code both fail there.... anyone still up this late?
User ID can be found under Help -> About MultiCharts.
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 7.4
Hello Fernando,Hi.
Every time I look at the DOM I'm always wishing to have a way to know how many trades were executed at each price.
I don't know if it's possible, but can we have a DOM that record all trades executed at each price, something similar to the attached image?
With a tool such as this we could easily see which prices are generating more business and knowing that, we could act in a more suitable way, depending naturally of our own trading strategy.
Regards.
Fernando
Thank you for your suggestion. We are planning to add Volume Histogram (displaying volume at every price level from the beginning of the session) to DOM. It was even presented on the first drafts. The downside of such functionality is that it may not work correctly with all brokers.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 7.4
What about an option to use the broker or a separate data feed (when available) such as eSignal or IQFeed to display the volume? This way we could easily circumvent the broker's faulty volume.We are planning to add Volume Histogram (displaying volume at every price level from the beginning of the session) to DOM. It was even presented on the first drafts. The downside of such functionality is that it may not work correctly with all brokers.
Regards,
Fernando
-
- Posts: 62
- Joined: 03 Nov 2011
- Has thanked: 12 times
- Been thanked: 2 times
wish i had not downloaded latest version
finally did and it is a total bugfest. installed and it hung on compiling indicators. rebooted and launched and got the "you are alread logged on etc..." got past that, loaded a chart and memory error crash ola.
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: wish i had not downloaded latest version
greenroomhoo,I have made several posts re: memory issue but put that behind me and actually had it working well enough for my purposes until i got the latest pop up to download this version.
finally did and it is a total bugfest. installed and it hung on compiling indicators. rebooted and launched and got the "you are alread logged on etc..." got past that, loaded a chart and memory error crash ola.
If you have a lot of custom studies, compiling them can take a while. To avoid long waiting time uncheck Compile Studies check box when installing MultiCharts.
"You are already logged on" message may appear when last MultiCharts session was terminated incorrectly (you restarted the computer).
As for the memory error crash, could you please be more precise? How many charts, bars on charts, studies, scanner windows you had open? What is the resolution of your charts?
Please try to disable MultiCharts log files if they are enabled:
- close MultiCharts, Quote Manager and PowerLanguage Editor;
- download and run the following reg file: http://dl.dropbox.com/u/26968921/AllTracesOFF.reg
- restart your computer.
If the problem persists and can be easily reproduced, please come to our Live Chat Mon-Fri from 6:30 AM to 4 PM EST so we can connect to your machine remotely and collect dump files for investigation: http://messenger.providesupport.com/mes ... pport.html
-
- Posts: 62
- Joined: 03 Nov 2011
- Has thanked: 12 times
- Been thanked: 2 times
Re: MULTICHARTS 7.4
i uninstalled then reinstalled and it is working ok now. have to keep my charts to 5 days and i dont have that many. all are three range.
ill just shut up and wait for the 64bit version (anxiously).
ill just shut up and wait for the 64bit version (anxiously).
Re: MULTICHARTS 7.4
all okHello Fibdax.I modified the code in this way and does not work
if time >900 then begin
buy("buy1") 1 contract next bar 1202 limit;
end;
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp: In member function `virtual void s_vuoto::Body()':
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp:54: error: `SavePricedOrder' undeclared (first use this function)
C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\STRATE~1\s_vuoto.cpp:54: error: (Each undeclared identifier is reported only once for each function it appears in.)
Is there anyone who has this problem?
Is there a solution?
Please install the following updater to fix the issue:
1. Close MultiCharts AND PowerLanguage Editor
2. Download the following zip archive onto your machine and unpack it to a new folder.
http://dl.dropbox.com/u/27918922/MakeGC ... 155_74.zip
3. Run Updater.exe, click on Update, then when you see message ‘DONE’ click on Close. MultiCharts and PowerLanguage Editor should be closed while performing the update.
thanks
Re: MULTICHARTS 7.4
After registration I cant start MC, QM, Portf. Back Tester! I see for short time the MultiCharts.exe in task-manger, but it disappear immediately.
I can start only PowerL. Editor and 3D Optim. Charts.
I did a lot repair, install, uninstall, uncheck Compile Studies check box when installing MultiCharts and so on. Its possible to update a old MC 6.1.3605.400 version?
The only error I get is from Portf. Back Tester: see screenshot
I can start only PowerL. Editor and 3D Optim. Charts.
I did a lot repair, install, uninstall, uncheck Compile Studies check box when installing MultiCharts and so on. Its possible to update a old MC 6.1.3605.400 version?
The only error I get is from Portf. Back Tester: see screenshot
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 7.4
Please download and install these three files one by one in the following order:After registration I cant start MC, QM, Portf. Back Tester! I see for short time the MultiCharts.exe in task-manger, but it disappear immediately.
I can start only PowerL. Editor and 3D Optim. Charts.
I did a lot repair, install, uninstall, uncheck Compile Studies check box when installing MultiCharts and so on. Its possible to update a old MC 6.1.3605.400 version?
The only error I get is from Portf. Back Tester: see screenshot
1) http://dl.dropbox.com/u/27918922/vcredi ... P1_eng.exe
2) http://dl.dropbox.com/u/27918922/vcredi ... 08_eng.exe
3) http://dl.dropbox.com/u/27918922/vcredi ... P1_eng.exe
After the installation please restart the PC.
This should fix the error message and MultiCharts should run properly.
Re: MULTICHARTS 7.4
I did, but still everything the same as in my last posting.Please download and install these three files one by one in the following order:
1) http://dl.dropbox.com/u/27918922/vcredi ... P1_eng.exe
2) http://dl.dropbox.com/u/27918922/vcredi ... 08_eng.exe
3) http://dl.dropbox.com/u/27918922/vcredi ... P1_eng.exe
After the installation please restart the PC.
This should fix the error message and MultiCharts should run properly.
Should I "remove"/ "repair" new installation of MC, after the installation of the runtime components files above?
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 7.4
Please try to repair MultiCharts after installing the specified above components.I did, but still everything the same as in my last posting.Please download and install these three files one by one in the following order:
1) http://dl.dropbox.com/u/27918922/vcredi ... P1_eng.exe
2) http://dl.dropbox.com/u/27918922/vcredi ... 08_eng.exe
3) http://dl.dropbox.com/u/27918922/vcredi ... P1_eng.exe
After the installation please restart the PC.
This should fix the error message and MultiCharts should run properly.
Should I "remove"/ "repair" new installation of MC, after the installation of the runtime components files above?
If this solution didn't help and you still have the issue-please come to our live chat Monday-Friday 6:30 am - 4 pm EST.
We will do our best to help you.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 7.4
Why can't we, in offline mode, have access to the historical orders on the chart?
If all orders are registered in the Order Tracker, shouldn't MC be able to plot on the charts the historical orders?
Regards,
Fernando
If all orders are registered in the Order Tracker, shouldn't MC be able to plot on the charts the historical orders?
Regards,
Fernando
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 7.4
Please also make sure that you have Microsoft NET Framework 2.0 installed on your PC.I did, but still everything the same as in my last posting.Please download and install these three files one by one in the following order:
1) http://dl.dropbox.com/u/27918922/vcredi ... P1_eng.exe
2) http://dl.dropbox.com/u/27918922/vcredi ... 08_eng.exe
3) http://dl.dropbox.com/u/27918922/vcredi ... P1_eng.exe
After the installation please restart the PC.
This should fix the error message and MultiCharts should run properly.
Should I "remove"/ "repair" new installation of MC, after the installation of the runtime components files above?
- CrazyNasdaq
- Posts: 321
- Joined: 02 Sep 2009
- Location: ITALY
- Has thanked: 98 times
- Been thanked: 89 times
Re: MULTICHARTS 7.4
Take in your consideration the option to add a sound when an order is filled so if I'm not watching the market, I'm alerted from the sound of the execution of my order.Hello Fernando,
Thank you for your suggestion. We are planning to add Volume Histogram (displaying volume at every price level from the beginning of the session) to DOM. It was even presented on the first drafts. The downside of such functionality is that it may not work correctly with all brokers.
This option should be activated or disactivated by the user from an option tab setting.
This option is a feature request in the pm section as MC-601http://www.multicharts.com/pm/viewissue ... _no=MC-601
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 7.4
Hello CrazyNasdaq.Take in your consideration the option to add a sound when an order is filled so if I'm not watching the market, I'm alerted from the sound of the execution of my order.Hello Fernando,
Thank you for your suggestion. We are planning to add Volume Histogram (displaying volume at every price level from the beginning of the session) to DOM. It was even presented on the first drafts. The downside of such functionality is that it may not work correctly with all brokers.
This option should be activated or disactivated by the user from an option tab setting.
This option is a feature request in the pm section as MC-601http://www.multicharts.com/pm/viewissue ... _no=MC-601
This issue's status has been changed to 'Under Review'.