Open ECry not working MC
- futurestrader019
- Posts: 79
- Joined: 14 Apr 2007
- Has thanked: 1 time
Open ECry not working MC
Open ECry recently did a large upgrade and I was told by them that all vendors, incl MC, were given notice to provide users with whatever file(s) would be needed for the data to work in their platform.
Is MC aware of this upgrade and is there a 'fix' somewhere that I am just not seeing?
Thanks!
Here's the email that was sent:
Hello:
Friday, August 3, 2007 OEC released OECAPI 3.1.1.0 as the latest version of our API. This version is now available at the My Account section of our website for all new and existing OECAPI users.
On Friday, August 10, 2007 after 5:30 EST. Open E Cry will be releasing this new API into our simulation environment, sim.openecry.com. This is a mandatory upgrade. Failure to upgrade will result in your custom application not being compatible with the installed SIM server version.
Also keep in mind that we have made available our API servers to all developers so you can verify that your software will function properly with the latest changes before this release. Please report any issues you find to our API forum or email them to api@openecry.com for further investigation.
For those of you who are developing commercial software and have mutual customers with OEC, any help you can provide by way of notifying these customers is greatly appreciated. For example, if you are hosting the OECAPI Client Installation, make sure your website gets updated with the latest version.
If you have any questions please email api@openecry.com.
Best regards,
Open E Cry Development Team
Is MC aware of this upgrade and is there a 'fix' somewhere that I am just not seeing?
Thanks!
Here's the email that was sent:
Hello:
Friday, August 3, 2007 OEC released OECAPI 3.1.1.0 as the latest version of our API. This version is now available at the My Account section of our website for all new and existing OECAPI users.
On Friday, August 10, 2007 after 5:30 EST. Open E Cry will be releasing this new API into our simulation environment, sim.openecry.com. This is a mandatory upgrade. Failure to upgrade will result in your custom application not being compatible with the installed SIM server version.
Also keep in mind that we have made available our API servers to all developers so you can verify that your software will function properly with the latest changes before this release. Please report any issues you find to our API forum or email them to api@openecry.com for further investigation.
For those of you who are developing commercial software and have mutual customers with OEC, any help you can provide by way of notifying these customers is greatly appreciated. For example, if you are hosting the OECAPI Client Installation, make sure your website gets updated with the latest version.
If you have any questions please email api@openecry.com.
Best regards,
Open E Cry Development Team
- futurestrader019
- Posts: 79
- Joined: 14 Apr 2007
- Has thanked: 1 time
- Marina Pashkova
- Posts: 2758
- Joined: 27 Jul 2007
- futurestrader019
- Posts: 79
- Joined: 14 Apr 2007
- Has thanked: 1 time
- Marina Pashkova
- Posts: 2758
- Joined: 27 Jul 2007
- futurestrader019
- Posts: 79
- Joined: 14 Apr 2007
- Has thanked: 1 time
- futurestrader019
- Posts: 79
- Joined: 14 Apr 2007
- Has thanked: 1 time
- Marina Pashkova
- Posts: 2758
- Joined: 27 Jul 2007
- futurestrader019
- Posts: 79
- Joined: 14 Apr 2007
- Has thanked: 1 time
I hope MC can get this fixed soon! SC had it fixed late Wed night. I'm not sure why it takes SC 3 days and will take MC approx 2 weeks...
Don't get me wrong, I am a big MC fan, but it's frustrating when MC was given ample notice about this update and chose to do nothing until after the upgrade became mandatory. And now SC, which costs about $7/mo, can get the fix in place in 3 days, but MC that costs $500+ takes 2 weeks.
I just hope there's no bugs and it works perfectly when the solution is done.
Don't get me wrong, I am a big MC fan, but it's frustrating when MC was given ample notice about this update and chose to do nothing until after the upgrade became mandatory. And now SC, which costs about $7/mo, can get the fix in place in 3 days, but MC that costs $500+ takes 2 weeks.
I just hope there's no bugs and it works perfectly when the solution is done.
- Marina Pashkova
- Posts: 2758
- Joined: 27 Jul 2007
I apologize for the inconvenience once again.
What really happened is that for whatever reasons we never received a notice about the changes. We are sure that OpenECry did send out e-mails well in advance but we received the general notification only 3 days after you started this thread. So in fact we did not have any time to prepare for the changes beforehand.
What really happened is that for whatever reasons we never received a notice about the changes. We are sure that OpenECry did send out e-mails well in advance but we received the general notification only 3 days after you started this thread. So in fact we did not have any time to prepare for the changes beforehand.
- futurestrader019
- Posts: 79
- Joined: 14 Apr 2007
- Has thanked: 1 time
- Marina Pashkova
- Posts: 2758
- Joined: 27 Jul 2007
- futurestrader019
- Posts: 79
- Joined: 14 Apr 2007
- Has thanked: 1 time
- Marina Pashkova
- Posts: 2758
- Joined: 27 Jul 2007
- Marina Pashkova
- Posts: 2758
- Joined: 27 Jul 2007
Hello,
Regarding MC functioning with the updated OpenECry.
Attached please find 3 dll files that need to replace the corresponding dlls currently used in MultiCharts.
To replace tsOECDataFeed.dll please go to MultiCharts\Datafeeds folder
To replace api.dll and oec_api.dll please go to MultiCharts folder.
Please note that this is a temporary solution. The new version of MultiCharts due next week will have this fixed.
Regarding MC functioning with the updated OpenECry.
Attached please find 3 dll files that need to replace the corresponding dlls currently used in MultiCharts.
To replace tsOECDataFeed.dll please go to MultiCharts\Datafeeds folder
To replace api.dll and oec_api.dll please go to MultiCharts folder.
Please note that this is a temporary solution. The new version of MultiCharts due next week will have this fixed.
- Attachments
-
- OEC.zip
- (420.43 KiB) Downloaded 171 times
When you say new version does that mean one would be forced to upgrade? or will older versions work with OEC with the above file? I do not like using newer versions of software since the one I am using does everything I want it to do. Seems like there are more bugs in newer software that I do not want to deal with.
- futurestrader019
- Posts: 79
- Joined: 14 Apr 2007
- Has thanked: 1 time
- Marina Pashkova
- Posts: 2758
- Joined: 27 Jul 2007
Hello,
I attached the dlls again.
Please make sure you take the following steps replacing dlls:
1. Download the files
2. Unzip them
3. Run regoecdatafeed.bat file
4. Make sure you are using a valid login/password/datasever. You can check this in QuoteManager->Tools->Data Sources->Open E Cry->Settings.
Should work. I just double-checked it on my machine.
If it still doesn't work for you, please let us know.
I attached the dlls again.
Please make sure you take the following steps replacing dlls:
1. Download the files
2. Unzip them
3. Run regoecdatafeed.bat file
4. Make sure you are using a valid login/password/datasever. You can check this in QuoteManager->Tools->Data Sources->Open E Cry->Settings.
Should work. I just double-checked it on my machine.
If it still doesn't work for you, please let us know.
- Marina Pashkova
- Posts: 2758
- Joined: 27 Jul 2007
Hello,
I attached the dlls again.
Please make sure you take the following steps replacing dlls:
1. Download the files
2. Unzip them
3. Run regoecdatafeed.bat file
4. Make sure you are using a valid login/password/datasever. You can check this in QuoteManager->Tools->Data Sources->Open E Cry->Settings.
Should work. I just double-checked it on my machine.
If it still doesn't work for you, please let us know.
I attached the dlls again.
Please make sure you take the following steps replacing dlls:
1. Download the files
2. Unzip them
3. Run regoecdatafeed.bat file
4. Make sure you are using a valid login/password/datasever. You can check this in QuoteManager->Tools->Data Sources->Open E Cry->Settings.
Should work. I just double-checked it on my machine.
If it still doesn't work for you, please let us know.
- Attachments
-
- OEC.zip
- (420.88 KiB) Downloaded 166 times
- futurestrader019
- Posts: 79
- Joined: 14 Apr 2007
- Has thanked: 1 time