I just installed Ver4 beta 3 on another computer(p4 3.0 gig) and it verifies all studies ok. it appears to be related to my new computer- is there a problem running Ver4 beta3 Power Language editor on a Quad core ? (Q9400) I've never had this problem on another computer or on the quad core with other beta versions.(Ver4 beta 2 worked fine)
I can't even verify brackets {}
I downloaded ver4 beta 3 again and tried a "repair" but that didn't help.
------ Compiled with error(s): ------
Compile error
errLine 0, errColumn 0, errLineEnd 0, errColumnEnd 0
Help ! MC Ver4 beta3 on quad core won't verify all studies
-
- Posts: 407
- Joined: 01 Jan 2008
- Been thanked: 3 times
-
- Posts: 407
- Joined: 01 Jan 2008
- Been thanked: 3 times
-
- Posts: 407
- Joined: 01 Jan 2008
- Been thanked: 3 times
What to do when PLEditor fails to compile w/o any reasons
When PLEditor fails to compile without any reasons:
1. Modify registry as below:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]
"NtfsDisable8dot3NameCreation"=dword:00000000
2. remove MC
3. remove the directory %ProgramFiles%TS Support/ (or wherever you have
MC installed) and all the other TS Support folders
4. restart your computer
5. reinstall MC
1. Modify registry as below:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]
"NtfsDisable8dot3NameCreation"=dword:00000000
2. remove MC
3. remove the directory %ProgramFiles%TS Support/ (or wherever you have
MC installed) and all the other TS Support folders
4. restart your computer
5. reinstall MC
-
- Posts: 407
- Joined: 01 Jan 2008
- Been thanked: 3 times
Re: What to do when PLEditor fails to compile w/o any reason
When PLEditor fails to compile without any reasons:
1. Modify registry as below:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]
"NtfsDisable8dot3NameCreation"=dword:00000000
2. remove MC
3. remove the directory %ProgramFiles%TS Support/ (or wherever you have
MC installed) and all the other TS Support folders
4. restart your computer
5. reinstall MC
***Thanks, I'll try that now !!!
-
- Posts: 407
- Joined: 01 Jan 2008
- Been thanked: 3 times
It didn't work !
I'm a little unsure of this part- "[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]
"NtfsDisable8dot3NameCreation"=dword:00000000"
I'm using Windows XP sp3 , my registry looks a little different.
I set the value of that "NtfsDisable8dot3NameCreation" to 00000000.
I deleted all files using the Ver4 beta3 installer, then manually deleted the tssupport folder.
I scanned for the data files .gdb and it found none. Then I re-booted and re-loaded ver4 beta3.
I noticed that the value changed back to 1 after re-installing MC , On my backup computer it's still 0, after installing MC.
I'm a little unsure of this part- "[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]
"NtfsDisable8dot3NameCreation"=dword:00000000"
I'm using Windows XP sp3 , my registry looks a little different.
I set the value of that "NtfsDisable8dot3NameCreation" to 00000000.
I deleted all files using the Ver4 beta3 installer, then manually deleted the tssupport folder.
I scanned for the data files .gdb and it found none. Then I re-booted and re-loaded ver4 beta3.
I noticed that the value changed back to 1 after re-installing MC , On my backup computer it's still 0, after installing MC.
- Attachments
-
- registry_MC.gif
- (6.76 KiB) Downloaded 1178 times
-
- Posts: 407
- Joined: 01 Jan 2008
- Been thanked: 3 times
-
- Posts: 407
- Joined: 01 Jan 2008
- Been thanked: 3 times
I get this PL Editor error with V5 beta1.
PL Editor Version 3.0
Product Version 5.0.1737.201
File Version 1.6.1737.201
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]
"NtfsDisable8dot3NameCreation" dword is already set to zero.
Don't know what to do now.
Somebody with the same problems?
Regards
Robert
PL Editor Version 3.0
Product Version 5.0.1737.201
File Version 1.6.1737.201
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\FileSystem]
"NtfsDisable8dot3NameCreation" dword is already set to zero.
Don't know what to do now.
Somebody with the same problems?
Regards
Robert
Did a re- install with newest version but PL Editor is still not compiling any studies.
I really need some help here. It's not funny anymore.
P.S. I'm using DELL Inspiron 9400 Win XP SP2
I really need some help here. It's not funny anymore.
P.S. I'm using DELL Inspiron 9400 Win XP SP2
Last edited by gautama2 on 12 Nov 2008, edited 1 time in total.
- TJ
- Posts: 7745
- Joined: 29 Aug 2006
- Location: Global Citizen
- Has thanked: 1033 times
- Been thanked: 2224 times
- Marina Pashkova
- Posts: 2758
- Joined: 27 Jul 2007
Hello everybody,
The problem when you can't compile any studies can be caused by several environmental factors. The solution that HaeRim offered will remedy only one of them.
If you have the similar problem, it would be best if you contacted our customer support representatives via LiveChat. Several potential problems will the checked and depending on which one is your case, a solution will be offered.
Regards.
The problem when you can't compile any studies can be caused by several environmental factors. The solution that HaeRim offered will remedy only one of them.
If you have the similar problem, it would be best if you contacted our customer support representatives via LiveChat. Several potential problems will the checked and depending on which one is your case, a solution will be offered.
Regards.
Marina,Hello everybody,
The problem when you can't compile any studies can be caused by several environmental factors. The solution that HaeRim offered will remedy only one of them.
If you have the similar problem, it would be best if you contacted our customer support representatives via LiveChat. Several potential problems will the checked and depending on which one is your case, a solution will be offered.
Regards.
I thought the solution I knew would always solve the compile error problem, but obviously it is a solution just only of the many cases.
Why don't you list up all the causes and solutions for this compile error after installation so that users won't ask the same questions repeatedly?
- Marina Pashkova
- Posts: 2758
- Joined: 27 Jul 2007
Dear HaeRim,
The second cause for PLEditor being unable to compile any studies is that something else takes up the address space that it uses. To see if that is the case, you would need to go to E:\Documents and Settings\All Users\Application Data\TS Support\MultiCharts\StudyServer\Studies and send us the message that you have in the file that is called 'compiler error'.
The rest should be left to our engineers.
Regards.
The second cause for PLEditor being unable to compile any studies is that something else takes up the address space that it uses. To see if that is the case, you would need to go to E:\Documents and Settings\All Users\Application Data\TS Support\MultiCharts\StudyServer\Studies and send us the message that you have in the file that is called 'compiler error'.
The rest should be left to our engineers.
Regards.