Keywords
- TJ
- Posts: 7744
- Joined: 29 Aug 2006
- Location: Global Citizen
- Has thanked: 1033 times
- Been thanked: 2224 times
Re: Keywords
https://www.multicharts.com/trading-sof ... /Main_PageIs there an alphabetical listing of keywords or am I missing something?
look in
Contents
1 MultiCharts
2 What is MultiCharts Wiki
3 How It Works
4 Content
5 PowerLanguage Keyword Reference
- TJ
- Posts: 7744
- Joined: 29 Aug 2006
- Location: Global Citizen
- Has thanked: 1033 times
- Been thanked: 2224 times
Re: Keywords
Thanks. I saw the Wiki categories but when I want to look something up I don't want to guess what category it is in and then narrow it down. On the NAV bar the Alphabetical Index doesn't open so one is stuck with the categories again.
I wanted to look up "Bidsize". Do i have to look up half of the categories to find where it is? Why isn't there a simple alphabetical index somewhere like there used to be? Seems like a no brainer.
I wanted to look up "Bidsize". Do i have to look up half of the categories to find where it is? Why isn't there a simple alphabetical index somewhere like there used to be? Seems like a no brainer.
- TJ
- Posts: 7744
- Joined: 29 Aug 2006
- Location: Global Citizen
- Has thanked: 1033 times
- Been thanked: 2224 times
Re: Keywords
In the PowerLanguage Editor (PLE),Thanks. I saw the Wiki categories but when I want to look something up I don't want to guess what category it is in and then narrow it down. On the NAV bar the Alphabetical Index doesn't open so one is stuck with the categories again.
I wanted to look up "Bidsize". Do i have to look up half of the categories to find where it is? Why isn't there a simple alphabetical index somewhere like there used to be? Seems like a no brainer.
View > Output Bar
look in the bottom frame,
under "Help" tab.
- TJ
- Posts: 7744
- Joined: 29 Aug 2006
- Location: Global Citizen
- Has thanked: 1033 times
- Been thanked: 2224 times
- TJ
- Posts: 7744
- Joined: 29 Aug 2006
- Location: Global Citizen
- Has thanked: 1033 times
- Been thanked: 2224 times
Re: Keywords
see post #5Yes. That's what I used to do before I started using 8.0 64. I guess you are saying there is no alphabetical index unless you go back to 7. Seems like an obvious tool to have available.
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: Keywords
In PowerLanguage Editor go to View tab-> enable Navigator toolbar.Is there an alphabetical listing of keywords or am I missing something?
In the Navigator toolbar go to Dictionary tab->Keyword Alphabetical Index.
The list will appear on the Help tab of the Output toolbar.
- Attachments
-
- Keyword alphabetical index.png
- (56.24 KiB) Downloaded 1053 times
Re: Keywords
Is it up to date version of keywords?
Also, is there any chance to get them all printed. Preferable pdf format or etc. as in Wiki I`ve got to select them separately and it takes a lot of time to print.
Is there a MC printer-friendly Manual which is up to dated for version 7.4?
I`d like to have a paper copy of it.
Thank you
Also, is there any chance to get them all printed. Preferable pdf format or etc. as in Wiki I`ve got to select them separately and it takes a lot of time to print.
Is there a MC printer-friendly Manual which is up to dated for version 7.4?
I`d like to have a paper copy of it.
Thank you
- TJ
- Posts: 7744
- Joined: 29 Aug 2006
- Location: Global Citizen
- Has thanked: 1033 times
- Been thanked: 2224 times
Re: Keywords
right click on "Keyword Alphabetical Index",Is it up to date version of keywords?
Also, is there any chance to get them all printed. Preferable pdf format or etc. as in Wiki I`ve got to select them separately and it takes a lot of time to print.
Is there a MC printer-friendly Manual which is up to dated for version 7.4?
I`d like to have a paper copy of it.
Thank you
select Print.
ps. you can print to PDF, your printer software should support this option.
- Stan Bokov
- Posts: 963
- Joined: 18 Dec 2009
- Has thanked: 367 times
- Been thanked: 302 times
Re: Keywords
@whammer - please remember to click the Thanks button for those posts that you find helpful
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: Keywords
We do have MultiCharts and Keywords printer friendly manuals on our to-do list, but at the moment there is no ETA. You can find up-to-date information regarding reserved words and MultiCharts features in our Wiki.Is it up to date version of keywords?
Also, is there any chance to get them all printed. Preferable pdf format or etc. as in Wiki I`ve got to select them separately and it takes a lot of time to print.
Is there a MC printer-friendly Manual which is up to dated for version 7.4?
I`d like to have a paper copy of it.
Thank you
Re: Keywords
Why MC Help doesn`t work on x64 beta 3 version, it directing straight to MultiCharts Wiki page?
I also use MC 7.4, help file works ok, but I think it won`t be up-to-dated. Its just about printing all keywords to keep it in paper format.
Thank You
I also use MC 7.4, help file works ok, but I think it won`t be up-to-dated. Its just about printing all keywords to keep it in paper format.
Thank You
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: Keywords
MultiCharts.chm help file will no longer be provided with MultiCharts. All help information, "how to" guides, user contributed articles and reserver words are available in the Wiki.Why MC Help doesn`t work on x64 beta 3 version, it directing straight to MultiCharts Wiki page?
I also use MC 7.4, help file works ok, but I think it won`t be up-to-dated. Its just about printing all keywords to keep it in paper format.
Thank You
Though PowerLanguage.chm file with reserved words description is still available in PowerLanguage Editor. You can open this file and print its contents. PowerLanguage.chm can be found in MultiCharts installation folder (make a right click on the MC shortcut –> Properties –> "Shortcut" tab –> select "open file location").
- TJ
- Posts: 7744
- Joined: 29 Aug 2006
- Location: Global Citizen
- Has thanked: 1033 times
- Been thanked: 2224 times
Re: Keywords
Since the information is there,MultiCharts.chm help file will no longer be provided with MultiCharts. All help information, "how to" guides, user contributed articles and reserver words are available in the Wiki.Why MC Help doesn`t work on x64 beta 3 version, it directing straight to MultiCharts Wiki page?
I also use MC 7.4, help file works ok, but I think it won`t be up-to-dated. Its just about printing all keywords to keep it in paper format.
Thank You
Though PowerLanguage.chm file with reserved words description is still available in PowerLanguage Editor. You can open this file and print its contents. PowerLanguage.chm can be found in MultiCharts installation folder (make a right click on the MC shortcut –> Properties –> "Shortcut" tab –> select "open file location").
why don't you link the PowerLanguage.chm file to the [F1] key in MultiCharts?
or, link the [F1] key to the wiki page.
ps. an alphabetical list is needed in the wiki.
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: Keywords
Wiki is already linked to F1 in MultiCharts. You can change the shortcut in File->Keyboard shortcuts.Since the information is there,
why don't you link the PowerLanguage.chm file to the [F1] key in MultiCharts?
or, link the [F1] key to the wiki page.
Thank you for the suggestion.ps. an alphabetical list is needed in the wiki.