MULTICHARTS 9.1 BETA 1

Questions about MultiCharts and user contributed studies.
User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 06 Jul 2015

This version introduces a number of long-awaited features implemented in response to numerous user feature requests.

Local broker simulation, Forex board, Volume Profile in DOM window, multibroker trading performance summary and the ability to export only selected Trading Performance Report segments are only just a few highlights of the new features and improvements list. Currency conversion algorithm has been improved and Realized PnL is now available for the majority of supported brokers. We also added the possibility to set trailing stop, profit target and other special orders parameters in ticks for auto trading.

Learn more here

Download MultiCharts 9.1 Beta 1

AlphaCat
Posts: 69
Joined: 09 Jul 2013
Been thanked: 9 times

Re: MULTICHARTS 9.1 BETA 1

Postby AlphaCat » 07 Jul 2015

Hello,
any ETA on the .net version for this?

Regards,
A.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 07 Jul 2015

Hello AlphaCat,

MultiCharts .NET 9.1 Beta 1 can be expected within a week.

User avatar
ABC
Posts: 626
Joined: 16 Dec 2006
Has thanked: 119 times
Been thanked: 355 times
Contact:

Re: MULTICHARTS 9.1 BETA 1

Postby ABC » 07 Jul 2015

Hello AlphaCat,

MultiCharts .NET 9.1 Beta 1 can be expected within a week.
Will this Beta bring the ability to export protected studies out of MC.NET like you added to the free MC.NET?

Thank you,
ABC

SP
Posts: 453
Joined: 06 Feb 2006
Has thanked: 36 times
Been thanked: 283 times

Re: MULTICHARTS 9.1 BETA 1

Postby SP » 07 Jul 2015

I have set the "Unrealized Profit Calculation Mode" to "Get from IB". The new PnL on the right shows the correct number (€+8,89) but the bottom value is wrong (€3,89).
Attachments
Difference DOM.jpg
Difference DOM
Difference DOM.jpg (228.47 KiB) Viewed 8707 times

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 07 Jul 2015

Hello AlphaCat,

MultiCharts .NET 9.1 Beta 1 can be expected within a week.
Will this Beta bring the ability to export protected studies out of MC.NET like you added to the free MC.NET?

Thank you,
ABC
Hello ABC,

At the moment this functionality is exclusive to free MC.NET.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 07 Jul 2015

I have set the "Unrealized Profit Calculation Mode" to "Get from IB". The new PnL on the right shows the correct number (€+8,89) but the bottom value is wrong (€3,89).
Hello SP,

The DOM's Volume Profile PnL values are calculated by MultiCharts. When you use "Get from TWS" (single accounts only)" mode the PnL is streamed by IB API, the PnL values in MultiCharts (excluding VP in DOM) should match TWS Accounts window.

If you want the DOM's Volume Profile PnL values to match the other PnL values - you need to have all PnL values calculated by MultiCharts in "By best bid & best ask" mode. This mode requires realtime data subscription on your broker account for calculation. Here is how to set it up.

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 08 Jul 2015

Oh lord, you still didn't changed the way MC quote treasuries?
I thought 9.1 would finally remove that annoying and unnecessary "/32" quote.
You guys are the only ones that quote treasuries this way.
All brokers, all charts platforms use the simple quote 127'125 or even 127.125 but you guys continue to stick with 127 12.5/32.

Developers might think this is an important thing to see but it's not necessary, it's distracting, occupies unnecessary space on the price scale, the DOM and the T&S can be a mess by quoting this way and people might even become confused because they look at their broker platform and see the quotes in one way and then look at MC and there's another.

Image
Attachments
bond_quote.png
bond_quote.png (9.28 KiB) Viewed 10213 times

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 08 Jul 2015

Why is the PnL part of the volume profile option? I don't know about you but having the PnL side by side with the DOM can be quite distracting. One becomes more preoccupied with his PnL than manage his trade.
It would be preferable to have a separate option for it. They are two very different things.

Also, please consider to have the volume text justified and not in a zig-zag way which does not facilitate its reading.
The best way would be to put the volume text inside the PnL column.

Image
Attachments
dom.png
dom.png (73.83 KiB) Viewed 10178 times

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 08 Jul 2015

Tried the new simulator broker, AWESOME!

I noticed something that has been happening for the last couple of versions.
While charts and DOM shows the quotes in 32's, OPT and the Place Order window show the quotes in 64's.

Image

Image
Attachments
bond_quote04.png
bond_quote04.png (47.65 KiB) Viewed 10189 times
bond_quote03.png
bond_quote03.png (17.28 KiB) Viewed 10193 times

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 08 Jul 2015

Just for reassurance, the option to extend the rectangle to the right is still confirmed for 9.1 version, right?

KhaosTrader
Posts: 186
Joined: 10 May 2012
Has thanked: 14 times
Been thanked: 10 times

Re: MULTICHARTS 9.1 BETA 1

Postby KhaosTrader » 08 Jul 2015

I like having the P&L on the DOM, its very nice.

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 08 Jul 2015

I like having the P&L on the DOM, its very nice.
Sure, no problem, hence its own option to switch it ON/OFF.
It makes no sense having the PnL and the profile together. They are completely unrelated.

User avatar
CrazyNasdaq
Posts: 295
Joined: 02 Sep 2009
Location: ITALY
Has thanked: 84 times
Been thanked: 84 times

Re: MULTICHARTS 9.1 BETA 1

Postby CrazyNasdaq » 09 Jul 2015

Please, Which is the keyboard shortcut to recenter the DOM ? I haven't found it

Thanks in advance

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 09 Jul 2015

Please, Which is the keyboard shortcut to recenter the DOM ? I haven't found it

Thanks in advance
It's in the General category, not in the DOM category. Probably it should be replaced.
It's called DOM Auto Centering
Last edited by arnie on 09 Jul 2015, edited 1 time in total.

User avatar
CrazyNasdaq
Posts: 295
Joined: 02 Sep 2009
Location: ITALY
Has thanked: 84 times
Been thanked: 84 times

Re: MULTICHARTS 9.1 BETA 1

Postby CrazyNasdaq » 09 Jul 2015

Please, Which is the keyboard shortcut to recenter the DOM ? I haven't found it

Thanks in advance
It's in the General category, not in the DOM. Probably it should be replaced.
It's called DOM Auto Centering

No it's written in the 11th MORE IMPORTANT features of this release
• Added keyboard shortcut to center last price in DOM. Learn more: https://www.multicharts.com/pm/viewissu ... no=MC-1650

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 09 Jul 2015

Here's something interesting, while the DOM high and low for the day read the entire day, globex + cash session, the volume profile only reads the cash session.

I like the idea of having an option for us to set what session template to apply to the volume profile in the DOM but where is that option if I want to see the entire day?

Image
Attachments
dom02.png
dom02.png (62.68 KiB) Viewed 10129 times

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 09 Jul 2015

No it's written in the 11th MORE IMPORTANT features of this release
• Added keyboard shortcut to center last price in DOM. Learn more: https://www.multicharts.com/pm/viewissu ... no=MC-1650
Image
Attachments
dom03.png
dom03.png (23.98 KiB) Viewed 10247 times

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 10 Jul 2015

Tried the new simulator broker, AWESOME!

I noticed something that has been happening for the last couple of versions.
While charts and DOM shows the quotes in 32's, OPT and the Place Order window show the quotes in 64's.
This issue has been confirmed. The fix is targeted to MultiCharts 9.1 Beta 2.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 10 Jul 2015

Just for reassurance, the option to extend the rectangle to the right is still confirmed for 9.1 version, right?
This is the one in the "What's New":
Added an option for Drawings tools: “”Anchor to bars”". When enabled (by default), the drawings are anchored to bars on chart and will not change they position when new bars are added. When disabled – drawings are anchored to date/time value and can be extended to right as new bars are added until the end date/time appear on chart. Learn more:
viewtopic.php?f=1&t=12475&p=63614#p63614
viewtopic.php?f=1&t=47203
https://www.multicharts.com/pm/viewissu ... no=MC-1309

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 10 Jul 2015

Oh lord, you still didn't changed the way MC quote treasuries?
I thought 9.1 would finally remove that annoying and unnecessary "/32" quote.
You guys are the only ones that quote treasuries this way.
All brokers, all charts platforms use the simple quote 127'125 or even 127.125 but you guys continue to stick with 127 12.5/32.

Developers might think this is an important thing to see but it's not necessary, it's distracting, occupies unnecessary space on the price scale, the DOM and the T&S can be a mess by quoting this way and people might even become confused because they look at their broker platform and see the quotes in one way and then look at MC and there's another.
Why is the PnL part of the volume profile option? I don't know about you but having the PnL side by side with the DOM can be quite distracting. One becomes more preoccupied with his PnL than manage his trade.
It would be preferable to have a separate option for it. They are two very different things.

Also, please consider to have the volume text justified and not in a zig-zag way which does not facilitate its reading.
The best way would be to put the volume text inside the PnL column.
This is something we are considering to improve. An update is to follow.

waldem
Posts: 108
Joined: 18 Nov 2013
Has thanked: 3 times
Been thanked: 4 times

Re: MULTICHARTS 9.1 BETA 1

Postby waldem » 11 Jul 2015

hallo team, i've noticed that in GV included on new version does not exist any more the keywords: GVSetNamedDouble - GVGetNamedDouble.
since i have one strategy with this i have integrated from old GV 2.2.
it is something that you know?

User avatar
TJ
Posts: 7158
Joined: 29 Aug 2006
Location: Global Citizen
Has thanked: 988 times
Been thanked: 2042 times

Re: MULTICHARTS 9.1 BETA 1

Postby TJ » 11 Jul 2015

hallo team, i've noticed that in GV included on new version does not exist any more the keywords: GVSetNamedDouble - GVGetNamedDouble.
since i have one strategy with this i have integrated from old GV 2.2.
it is something that you know?
Please see this thread:
viewtopic.php?f=1&t=48711

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 11 Jul 2015

This is the one in the "What's New":
Added an option for Drawings tools: “”Anchor to bars”". When enabled (by default), the drawings are anchored to bars on chart and will not change they position when new bars are added. When disabled – drawings are anchored to date/time value and can be extended to right as new bars are added until the end date/time appear on chart. Learn more:
viewtopic.php?f=1&t=12475&p=63614#p63614
viewtopic.php?f=1&t=47203
https://www.multicharts.com/pm/viewissu ... no=MC-1309

When I requested the right extension I was looking for something like we have in the Equidistant Channel

Image

otherwise we need to go, every day, to every single rectangle we have in the charts, access its properties, one by one, and move forward the End Date.

Image

I use the rectangle to extend important volume price areas into the future so I can have price areas that are extended for days or weeks. It's quite painful to have to access each one of their properties to move the end date forward so they can continually be extended.
This would be very easily fixed by having the same option already available in the equidistant channel tool.

I got really thrilled when I saw that you would finally make this available but it seems that you've only fixed that annoying rectangle resize on each new coming tick, which is great because it was really annoying but not having the option to extend it to the right... man, what a buzzkill :(
Attachments
rec_ext02.png
rec_ext02.png (38.62 KiB) Viewed 10051 times
rec_ext.png
rec_ext.png (11.5 KiB) Viewed 10069 times

User avatar
CrazyNasdaq
Posts: 295
Joined: 02 Sep 2009
Location: ITALY
Has thanked: 84 times
Been thanked: 84 times

Re: MULTICHARTS 9.1 BETA 1

Postby CrazyNasdaq » 12 Jul 2015

There are still some problems with Custom Futures based on Volume days of Roll Over
With CQG datafeed there is a jump in historical datafeed from March to second decade of june on DAX futures and Eurostoxx50 futures if ROLL OVER conditions is set to Volume days.
If ROLL OVER conditions is set on calendar days the historical data does not present any jump.


ROLL OVER conditions set on Volume days
Image

ROLL OVER conditions set on calendar days
Image


These problems were not present on Multicharts 9.0 official

User avatar
CrazyNasdaq
Posts: 295
Joined: 02 Sep 2009
Location: ITALY
Has thanked: 84 times
Been thanked: 84 times

Re: MULTICHARTS 9.1 BETA 1

Postby CrazyNasdaq » 13 Jul 2015

There are still some problems with Custom Futures based on Volume days of Roll Over
With CQG datafeed there is a jump in historical datafeed from March to second decade of june on DAX futures and Eurostoxx50 futures if ROLL OVER conditions is set to Volume days.
If ROLL OVER conditions is set on calendar days the historical data does not present any jump.
....
These problems were not present on Multicharts 9.0 official
Same problems with IQFeed datafeed custom futures set on Volume days ROLL OVER

Image

User avatar
swisstrader
Posts: 110
Joined: 16 Nov 2005
Location: Earth
Has thanked: 13 times
Been thanked: 19 times
Contact:

Re: Demo Data from AMP in MULTICHARTS 9.1 BETA 1

Postby swisstrader » 13 Jul 2015

Demo data access from AMP does not work with MC64 v9.1 beta1.

:-(


[07/13/2015 09:45:15] Establishing connection to CQG: Datafeed Version= 1.0.11373.201
[07/13/2015 09:45:17] Error message: Logon failed: Trader is not enabled to use WebApiTest client application. Please contact your FCM.
[07/13/2015 09:45:17] Lost connection to Data Network.

User avatar
CrazyNasdaq
Posts: 295
Joined: 02 Sep 2009
Location: ITALY
Has thanked: 84 times
Been thanked: 84 times

Re: MULTICHARTS 9.1 BETA 1

Postby CrazyNasdaq » 14 Jul 2015

In Multicharts 9.1 beta 1 there is a new very annoying behaviour which affects the STATUS ON/OFF of an indicator when you switch form STATUS ON to STATUS OFF.
If the indicator is in the subchart#1 and you switch the indicator to STATUS OFF, the indicator disappears as it should be. But when you try to switch it again to STATUS ON, the indicator becomes active but is set in the subchart "hidden" and you have to reset it (or each one if you have more than one), to the previous subchart which becomes very annoying and keeps too much time
I don't like this behaviour at all !!!!

Watch the video in the link attached

http://it.tinypic.com/r/241jy1c/8

https://vid.me/PBZE

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: Demo Data from AMP in MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 14 Jul 2015

Demo data access from AMP does not work with MC64 v9.1 beta1.

:-(


[07/13/2015 09:45:15] Establishing connection to CQG: Datafeed Version= 1.0.11373.201
[07/13/2015 09:45:17] Error message: Logon failed: Trader is not enabled to use WebApiTest client application. Please contact your FCM.
[07/13/2015 09:45:17] Lost connection to Data Network.
Hello swisstrader,

Since MultiCharts 9.1 beta 1 CQG connection works via WebApi.
Old demo accounts created for COM API (which was used previously) will not work.
You need to contact your broker and request a new WebApi demo account.
Live accounts should work OK without any additional adjustments.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 15 Jul 2015

In Multicharts 9.1 beta 1 there is a new very annoying behaviour which affects the STATUS ON/OFF of an indicator when you switch form STATUS ON to STATUS OFF.
If the indicator is in the subchart#1 and you switch the indicator to STATUS OFF, the indicator disappears as it should be. But when you try to switch it again to STATUS ON, the indicator becomes active but is set in the subchart "hidden" and you have to reset it (or each one if you have more than one), to the previous subchart which becomes very annoying and keeps too much time
I don't like this behaviour at all !!!!

Watch the video in the link attached

http://it.tinypic.com/r/241jy1c/8

https://vid.me/PBZE
Hello CrazyNasdaq,

This issue has been confirmed. The fix is targeted to MultiCharts 9.1 Beta 2.

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 15 Jul 2015

I love the DOM center keyboard shortcut, especially the ability it has to center all open DOM's at the same time. It's a beautiful thing to watch :)

The same way we have that horizontal line in the DOM that marks the high and low for the day, is it possible to have it also to mark the center of the DOM?
It would be nice to have such line (with a different color) so we can easily see how prices move up or down since last center.

mickatrade
Posts: 96
Joined: 12 Jul 2015
Has thanked: 18 times
Been thanked: 14 times

Re: MULTICHARTS 9.1 BETA 1

Postby mickatrade » 15 Jul 2015

Hello,
I'm a discretionary trader of US stocks (IB broker) and i use chart trading in order to move stop loss and take profit orders.
The issue is these orders are over the candleticks so i can't see them.Can you add the possibility to move orders on the left of charts ?
It would be i great feature.
Attachments
bug2.JPG
orders hidding candlesticks
bug2.JPG (64.58 KiB) Viewed 8635 times

User avatar
TJ
Posts: 7158
Joined: 29 Aug 2006
Location: Global Citizen
Has thanked: 988 times
Been thanked: 2042 times

Re: MULTICHARTS 9.1 BETA 1

Postby TJ » 15 Jul 2015

Hello,
I'm a discretionary trader of US stocks (IB broker) and i use chart trading in order to move stop loss and take profit orders.
The issue is these orders are over the candleticks so i can't see them.Can you add the possibility to move orders on the left of charts ?
It would be i great feature.
You can adjust the offset.


Right click on the Trade Panel,
Select Format Chart Trading,
Look under Active Orders and Position tab,
Adjust Connecting Line Length.

mickatrade
Posts: 96
Joined: 12 Jul 2015
Has thanked: 18 times
Been thanked: 14 times

Re: MULTICHARTS 9.1 BETA 1

Postby mickatrade » 15 Jul 2015

Yeah but i don't have time to change chart property while scalping, i just want to focus on my trade.
And i think active orders would be less annoying if they were on the left of the chart ( it's the past !).

User avatar
TJ
Posts: 7158
Joined: 29 Aug 2006
Location: Global Citizen
Has thanked: 988 times
Been thanked: 2042 times

Re: MULTICHARTS 9.1 BETA 1

Postby TJ » 15 Jul 2015

Yeah but i don't have time to change chart property while scalping, i just want to focus on my trade.
And i think active orders would be less annoying if they were on the left of the chart ( it's the past !).

This is the version 9 of MultiCharts,
and you talk as if you are the first user.



Image
Attachments
default.jpg
default.jpg (18.96 KiB) Viewed 9949 times

mickatrade
Posts: 96
Joined: 12 Jul 2015
Has thanked: 18 times
Been thanked: 14 times

Re: MULTICHARTS 9.1 BETA 1

Postby mickatrade » 15 Jul 2015

that s what i was looking for, thank you .
live support told me it wasn t possible to move it on the left.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 16 Jul 2015

There are still some problems with Custom Futures based on Volume days of Roll Over
With CQG datafeed there is a jump in historical datafeed from March to second decade of june on DAX futures and Eurostoxx50 futures if ROLL OVER conditions is set to Volume days.
If ROLL OVER conditions is set on calendar days the historical data does not present any jump.
ROLL OVER conditions set on Volume days
ROLL OVER conditions set on calendar days
These problems were not present on Multicharts 9.0 official
Same problems with IQFeed datafeed custom futures set on Volume days ROLL OVER
Hello CrazyNasdaq,

In order to study this case please provide the following information:
- workspace you are using (both CQG and IQFeed);
- in QuoteManager right click on the custom futures->Export instruments (with data, including futures CF is built on)->export minute and daily data. Please export both CQG and IQFeed Custom futures;
- screenshot of CQG data feed settings (QuoteManager->Tools->Data sources->CQG->Settings.
- specify the time zone of your PC.

If the file size is >10 mb please upload it to any file sharing hosting and send me the download link to support@multicharts.com.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 16 Jul 2015

Please, Which is the keyboard shortcut to recenter the DOM ? I haven't found it

Thanks in advance
It's in the General category, not in the DOM category. Probably it should be replaced.
It's called DOM Auto Centering
We'll have that corrected.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 17 Jul 2015

Here's something interesting, while the DOM high and low for the day read the entire day, globex + cash session, the volume profile only reads the cash session.

I like the idea of having an option for us to set what session template to apply to the volume profile in the DOM but where is that option if I want to see the entire day?
Hello arnie,

Please send us the export of instrument settings to support@multicharts.com

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 17 Jul 2015

Hello arnie,

Please send us the export of instrument settings to support@multicharts.com
I just confirmed that the DOM profile is "linked" with the default session template we use on the symbol.

If we use a ETH+ RTH session template we get the full day's range

Image

If we use a RTH session template we get the cash/pit session range

Image

Knowing this now I have opinion on it.
I see both pros and cons using the session templates this way so...
Attachments
rth_prof.png
rth_prof.png (86.87 KiB) Viewed 9916 times
eth_prof.png
eth_prof.png (92.16 KiB) Viewed 9887 times

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 17 Jul 2015

Here is another idea for the DOM

Image

There's no need for those two side areas of the DOM to be so large. It's dead space occupying precious space on our screens.
Also, it would be nice we could adjust the size of the profile, making it narrower or wider.

If we put 3 DOM's side by side and we need to see all together, all that "dead space" it's quite troubling for the eyes.
Maximize space and display what it's really important to be seen is key, specially when we are dealing with numbers.
Attachments
new_dom.png
new_dom.png (83.57 KiB) Viewed 9867 times

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 17 Jul 2015

Here is another idea for the DOM
There's no need for those two side areas of the DOM to be so large. It's dead space occupying precious space on our screens.
arnie, it's not a dead space. It's space for orders.
Also, it would be nice we could adjust the size of the profile, making it narrower or wider.
This is also something that we are looking into.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 17 Jul 2015

I love the DOM center keyboard shortcut, especially the ability it has to center all open DOM's at the same time. It's a beautiful thing to watch :)

The same way we have that horizontal line in the DOM that marks the high and low for the day, is it possible to have it also to mark the center of the DOM?
It would be nice to have such line (with a different color) so we can easily see how prices move up or down since last center.
Thank you for your suggestion, but unfortunately that is not something that is in our to-do list at the moment.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 17 Jul 2015

When I requested the right extension I was looking for something like we have in the Equidistant Channel. Otherwise we need to go, every day, to every single rectangle we have in the charts, access its properties, one by one, and move forward the End Date.
You can set the end point to a future date with ”Anchor to bars” disabled and the drawing will be auto-extended for you.

User avatar
CrazyNasdaq
Posts: 295
Joined: 02 Sep 2009
Location: ITALY
Has thanked: 84 times
Been thanked: 84 times

Re: MULTICHARTS 9.1 BETA 1

Postby CrazyNasdaq » 18 Jul 2015

In order to study this case please provide the following information:
- workspace you are using (both CQG and IQFeed);
- in QuoteManager right click on the custom futures->Export instruments (with data, including futures CF is built on)->export minute and daily data. Please export both CQG and IQFeed Custom futures;
- screenshot of CQG data feed settings (QuoteManager->Tools->Data sources->CQG->Settings.
- specify the time zone of your PC.

If the file size is >10 mb please upload it to any file sharing hosting and send me the download link to support@multicharts.com.
I've sent the mail with the link to download the files and the infos you've requested

AlphaCat
Posts: 69
Joined: 09 Jul 2013
Been thanked: 9 times

Re: MULTICHARTS 9.1 BETA 1

Postby AlphaCat » 20 Jul 2015

Hello AlphaCat,

MultiCharts .NET 9.1 Beta 1 can be expected within a week.
Is this happening?

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 21 Jul 2015

Hello AlphaCat,

MultiCharts .NET 9.1 Beta 1 can be expected within a week.
Is this happening?
We are going to have MultiCharts .NET 9.1 Beta 1 this week.

Ranfotto
Posts: 10
Joined: 10 Oct 2013
Has thanked: 7 times
Been thanked: 2 times

Re: Demo Data from AMP in MULTICHARTS 9.1 BETA 1

Postby Ranfotto » 23 Jul 2015

Demo data access from AMP does not work with MC64 v9.1 beta1.

[07/13/2015 09:45:15] Establishing connection to CQG: Datafeed Version= 1.0.11373.201
[07/13/2015 09:45:17] Error message: Logon failed: Trader is not enabled to use WebApiTest client application. Please contact your FCM.
[07/13/2015 09:45:17] Lost connection to Data Network.
Hello swisstrader,

Since MultiCharts 9.1 beta 1 CQG connection works via WebApi.
Old demo accounts created for COM API (which was used previously) will not work.
You need to contact your broker and request a new WebApi demo account.
Live accounts should work OK without any additional adjustments.
Please, could someone suggest me which is the DEMO CQG should I request to have WebApi working with Multicharts 9.1 beta 1 from this "infinite list" of platform request form AMP futures link:

http://www.ampfutures.com/platforms/

I've tried some of them but no one of which I've tried, works !!!
THANKS in advance

damnpenguins
Posts: 17
Joined: 19 Oct 2013
Has thanked: 2 times
Been thanked: 7 times

Re: MULTICHARTS 9.1 BETA 1

Postby damnpenguins » 23 Jul 2015

Just installed the 9.1 beta 1 and its great so far. Thanks for the continued improvement of MC!

One (stupid) question....

The addition of a local sim broker is fantastic. I was of the impression that it would be possible to utilise the local sim in market replay, but it isn't.

Is there a technical issue or a specific reason that we can't utilise the sim broker to simulate trading via market replay?

In the deep dark recesses of my memory I think I remember there being some reason that was outlined in a PM request once....

thanks again.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 23 Jul 2015

Just installed the 9.1 beta 1 and its great so far. Thanks for the continued improvement of MC!

One (stupid) question....

The addition of a local sim broker is fantastic. I was of the impression that it would be possible to utilise the local sim in market replay, but it isn't.

Is there a technical issue or a specific reason that we can't utilise the sim broker to simulate trading via market replay?

In the deep dark recesses of my memory I think I remember there being some reason that was outlined in a PM request once....

thanks again.
Hello damnpenguins,

Unfortunately current platform architecture does not provide possibility of implementing Playback Trading.

damnpenguins
Posts: 17
Joined: 19 Oct 2013
Has thanked: 2 times
Been thanked: 7 times

Re: MULTICHARTS 9.1 BETA 1

Postby damnpenguins » 23 Jul 2015

Thanks Henry, One final question if I could. I had a quick search for documentation regarding the new session functions in the beta release. is there any documentation on the wiki etc yet?

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: Demo Data from AMP in MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 23 Jul 2015

Please, could someone suggest me which is the DEMO CQG should I request to have WebApi working with Multicharts 9.1 beta 1 from this "infinite list" of platform request form AMP futures link:

http://www.ampfutures.com/platforms/

I've tried some of them but no one of which I've tried, works !!!
THANKS in advance
Hello Ranfotto,

You need to contact AMP futures directly for assistance. They do not yet have a web form for it.

User avatar
CrazyNasdaq
Posts: 295
Joined: 02 Sep 2009
Location: ITALY
Has thanked: 84 times
Been thanked: 84 times

Re: Demo Data from AMP in MULTICHARTS 9.1 BETA 1

Postby CrazyNasdaq » 23 Jul 2015

Please, could someone suggest me which is the DEMO CQG should I request to have WebApi working with Multicharts 9.1 beta 1 from this "infinite list" of platform request form AMP futures link:

http://www.ampfutures.com/platforms/

I've tried some of them but no one of which I've tried, works !!!
THANKS in advance
Hello Ranfotto,

You need to contact AMP futures directly for assistance. They do not yet have a web form for it.
Me too I have tried on a second PC the CQG demo with AMP and Multicharts 9.1 beta1 and ask directly to the technical support for a WebApi demo but at the moment seems that there is no possibility to have a Demo working with new WebApi. The Demo login credential they gave me did not work at all. The Live account works perfectly

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 24 Jul 2015

Thanks Henry, One final question if I could. I had a quick search for documentation regarding the new session functions in the beta release. is there any documentation on the wiki etc yet?
There is no documentation for these functions yet. Please email your specific question to support@multicharts.com

SP
Posts: 453
Joined: 06 Feb 2006
Has thanked: 36 times
Been thanked: 283 times

Re: MULTICHARTS 9.1 BETA 1

Postby SP » 24 Jul 2015

Could we get the same option to format the indicator before inserting into the scanner as we have for the charts?
Attachments
capture_001_24072015_183546.jpg
capture_001_24072015_183546.jpg (2.35 KiB) Viewed 8671 times

AlphaCat
Posts: 69
Joined: 09 Jul 2013
Been thanked: 9 times

Re: MULTICHARTS 9.1 BETA 1

Postby AlphaCat » 27 Jul 2015

Hello AlphaCat,

MultiCharts .NET 9.1 Beta 1 can be expected within a week.
Is this happening?
We are going to have MultiCharts .NET 9.1 Beta 1 this week.

I suppose this is why most developer just say "When its done" instead of giving out a release date..

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 27 Jul 2015

Could we get the same option to format the indicator before inserting into the scanner as we have for the charts?
Hello SP,

The "Format" option in the Insert Study is missing in the scanner window by design due to multiple reasons:
  • you can add a study to an empty scanner window with no instruments;
  • you can have the study in the scanner configured individually for each instrument;
  • there is a "Format Study for all instruments" option.
You may want to submit a feature request with a detailed description of how you want the option to work to the Project Management of our web site so other users can vote for it: https://www.multicharts.com/pm/

monexx
Posts: 87
Joined: 20 Feb 2014
Has thanked: 26 times
Been thanked: 7 times

Re: MULTICHARTS 9.1 BETA 1

Postby monexx » 28 Jul 2015

Hello,
MC9.1 beta1: problem loading volume profile for some instruments.
For example: Gold, Dollar Index, Japan Yen, Gas Oil, Dow Jones mini, Cocoa ...

Data source: CQG live

Attached screenshot:
Attachments
Bez názvu.jpg
Bez názvu.jpg (766.81 KiB) Viewed 8637 times

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 29 Jul 2015

I suppose this is why most developer just say "When its done" instead of giving out a release date..
MultiCharts .NET 9.1 Beta 1 is out now.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 29 Jul 2015

Hello,
MC9.1 beta1: problem loading volume profile for some instruments.
For example: Gold, Dollar Index, Japan Yen, Gas Oil, Dow Jones mini, Cocoa ...

Data source: CQG live

Attached screenshot:
Hello monexx,

In MultiCharts please go to File->New->QuoteManager Window
In QuoteManager Window go to Tools->Data Sources->CQG->Settings->disable the option “Use External Data”.
Then close the QuoteManager and MultiCharts.

Make sure that no processes with MultiCharts in Description remain in Task Manager -> Processes (Win7) or Details (Win8) tab:
https://www.multicharts.com/trading-sof ... _Processes
After that is done please start MultiCharts.
You should be able to get the required data now.

SP
Posts: 453
Joined: 06 Feb 2006
Has thanked: 36 times
Been thanked: 283 times

Re: MULTICHARTS 9.1 BETA 1

Postby SP » 29 Jul 2015

Henry,
another question: the profiles have a very nice feature for displaying the text size using "Static Font" so that the text always adapts if the price or time scale shrinks or extends. Is there a way to make that available for the PLEditor too so you can use it for your own studies and text displays like text_setsize ( text, Static Font) ?

monexx
Posts: 87
Joined: 20 Feb 2014
Has thanked: 26 times
Been thanked: 7 times

Re: MULTICHARTS 9.1 BETA 1

Postby monexx » 30 Jul 2015

Hello,
MC9.1 beta1: problem loading volume profile for some instruments.
For example: Gold, Dollar Index, Japan Yen, Gas Oil, Dow Jones mini, Cocoa ...

Data source: CQG live

Attached screenshot:
Hello monexx,

In MultiCharts please go to File->New->QuoteManager Window
In QuoteManager Window go to Tools->Data Sources->CQG->Settings->disable the option “Use External Data”.
Then close the QuoteManager and MultiCharts.

Make sure that no processes with MultiCharts in Description remain in Task Manager -> Processes (Win7) or Details (Win8) tab:
https://www.multicharts.com/trading-sof ... _Processes
After that is done please start MultiCharts.
You should be able to get the required data now.

Thank you very much, now it loads the volume profiles.

I found one error:
Attached 2 screenshots:

On the right side I set volume profile for the last two sessions.
Ever after close of 15 min bar leads to flattening volume profile. (1.screenshot)
After the reload of data that shows properly. (2.screenshot)
Attachments
after close of bar.jpg
after close of bar.jpg (770.96 KiB) Viewed 8594 times
after reload of data.jpg
after reload of data.jpg (791.28 KiB) Viewed 8623 times

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 30 Jul 2015

Thank you very much, now it loads the volume profiles.

I found one error:
Attached 2 screenshots:

On the right side I set volume profile for the last two sessions.
Ever after close of 15 min bar leads to flattening volume profile. (1.screenshot)
After the reload of data that shows properly. (2.screenshot)
So the Volume Profile is flattening after each 15 min bar is closed? Are you able to easily replicate this behavior? If you are then please come to our live chat to demonstrate it.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 30 Jul 2015

Henry,
another question: the profiles have a very nice feature for displaying the text size using "Static Font" so that the text always adapts if the price or time scale shrinks or extends. Is there a way to make that available for the PLEditor too so you can use it for your own studies and text displays like text_setsize ( text, Static Font) ?
Unfortunately there is no such functionality at the moment. You may want to submit a feature request to the Project Management of our web site so other users can vote for it: https://www.multicharts.com/pm/

monexx
Posts: 87
Joined: 20 Feb 2014
Has thanked: 26 times
Been thanked: 7 times

Re: MULTICHARTS 9.1 BETA 1

Postby monexx » 31 Jul 2015

Thank you very much, now it loads the volume profiles.

I found one error:
Attached 2 screenshots:

On the right side I set volume profile for the last two sessions.
Ever after close of 15 min bar leads to flattening volume profile. (1.screenshot)
After the reload of data that shows properly. (2.screenshot)
So the Volume Profile is flattening after each 15 min bar is closed? Are you able to easily replicate this behavior? If you are then please come to our live chat to demonstrate it.
Hello,
it seems that now it is fine.
The error is to feature two days but now it's OK. We'll see it later, I'm going to watch ...

Regards,
AB

User avatar
arnie
Posts: 1593
Joined: 11 Feb 2009
Location: Portugal
Has thanked: 481 times
Been thanked: 511 times

Re: MULTICHARTS 9.1 BETA 1

Postby arnie » 04 Aug 2015

In File -> Preferences -> Trading my currency options is set to EUR which would indicate that when I open OPT window my account balance would be in euros, correct?

What is happening though is that every time I open for the first time for the day the OPT window and then connect to my broker, my account balance is in dollars although there's no "$" symbol.
If I disconnect from the broker and reconnect than my account balance is in euros and the symbol "€" is now there.

Does anyone else is having the same reaction?

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 04 Aug 2015

In File -> Preferences -> Trading my currency options is set to EUR which would indicate that when I open OPT window my account balance would be in euros, correct?

What is happening though is that every time I open for the first time for the day the OPT window and then connect to my broker, my account balance is in dollars although there's no "$" symbol.
If I disconnect from the broker and reconnect than my account balance is in euros and the symbol "€" is now there.

Does anyone else is having the same reaction?
We will have that fixed in MultiCharts 9.1 Beta 2.

User avatar
MAtricks
Posts: 789
Joined: 09 Apr 2012
Has thanked: 286 times
Been thanked: 279 times

Re: MULTICHARTS 9.1 BETA 1

Postby MAtricks » 05 Aug 2015

The Portfolio Trader will not launch while MC is open in 9.1 beta 1.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 06 Aug 2015

The Portfolio Trader will not launch while MC is open in 9.1 beta 1.
Hello MAtricks,

If the process is running and the icon is present on the system task bar but you cannot see the portfolio window please do the following:
Please close all MCPortfolio.exe processes.
Start the Registry editor - go to Windows Start menu->Run->regedit.exe In the Registry editor go the following folder:
HKEY_CURRENT_USER\Software\TS Support\MultiCharts64 Delete MCPortfolio folder.
Start Portfolio Trader now.

If any error appears on start of Portfolio Trader - please attach a screenshot of the error you have and send us the logs.

User avatar
MAtricks
Posts: 789
Joined: 09 Apr 2012
Has thanked: 286 times
Been thanked: 279 times

Re: MULTICHARTS 9.1 BETA 1

Postby MAtricks » 06 Aug 2015

Sorry for not taking a screen shot of it. The error was that the TSServer process was already in use.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 06 Aug 2015

Sorry for not taking a screen shot of it. The error was that the TSServer process was already in use.
This message means that you have tried running MultiCharts components from different users. You need to run all components under the same user (as user or as admin).

User avatar
MAtricks
Posts: 789
Joined: 09 Apr 2012
Has thanked: 286 times
Been thanked: 279 times

Re: MULTICHARTS 9.1 BETA 1

Postby MAtricks » 06 Aug 2015

I never changed anything on my end except for upgrading to 9.1 beta on this machine. The two worked well together before that.

Just checked. Sure enough, after the upgrade, MC was still set to run as Admin, but the Portfolio Trader had lost that setting in the upgrade process.

monexx
Posts: 87
Joined: 20 Feb 2014
Has thanked: 26 times
Been thanked: 7 times

Re: MULTICHARTS 9.1 BETA 1

Postby monexx » 14 Aug 2015

Hello,
I have trouble downloading data of Copper.

Attached screenshot:
Attachments
Bez názvu.jpg
Bez názvu.jpg (635.51 KiB) Viewed 8562 times

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 14 Aug 2015

Hello,
I have trouble downloading data of Copper.

Attached screenshot:
We will check that.

monexx
Posts: 87
Joined: 20 Feb 2014
Has thanked: 26 times
Been thanked: 7 times

Re: MULTICHARTS 9.1 BETA 1

Postby monexx » 17 Aug 2015

Hello,
I have trouble downloading data of Copper.

Attached screenshot:
We will check that.
Hello,
Today it working correctly.

Regards,
AB

mickatrade
Posts: 96
Joined: 12 Jul 2015
Has thanked: 18 times
Been thanked: 14 times

Re: MULTICHARTS 9.1 BETA 1

Postby mickatrade » 17 Aug 2015

Hello,
I use MC for US stock trading (interactive broker). I've 5 opened DOM in my workspace.
I use keyboard shortcuts to enter in position (at bid or ask depending the short or long position)
Today i've the price level frozen at 87.22$ no matter the current bid/ask for stock EL when i hit the shortcut.
I have no problem with other stocks .
Attachments
frozen level2.JPG
Enter price level frozen
frozen level2.JPG (62.54 KiB) Viewed 8595 times

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 17 Aug 2015

Hello,
I use MC for US stock trading (interactive broker). I've 5 opened DOM in my workspace.
I use keyboard shortcuts to enter in position (at bid or ask depending the short or long position)
Today i've the price level frozen at 87.22$ no matter the current bid/ask for stock EL when i hit the shortcut.
I have no problem with other stocks .
Hello mickatrade,

Discussion Forum is a delayed response communication tool. Such case should be demonstrated remotely using the Live Chat. In case this behavior reappears - please come to Live Chat. If you are able to easily replicate it - please let us know the steps to do that.

mickatrade
Posts: 96
Joined: 12 Jul 2015
Has thanked: 18 times
Been thanked: 14 times

Re: MULTICHARTS 9.1 BETA 1

Postby mickatrade » 17 Aug 2015

Thank you Henry,
I restarted MC, and everything was OK.
But it's annoying because it could end in bad fill price .

O66
Posts: 144
Joined: 28 Nov 2006
Location: Netherlands
Has thanked: 2 times
Been thanked: 3 times

Re: MULTICHARTS 9.1 BETA 1

Postby O66 » 18 Aug 2015

Hi,

I did upgrade from 9.0 build 11210
Unfortunately i can't connect (CQG) and read only indicators aren't available anymore.
Im using windows 10.
What is it what im doing wrong?

Regards,

edit

Solved:
Since MultiCharts 9.1 beta 1 CQG connection works via WebApi.
Old demo accounts created for COM API (which was used previously) will not work.
You need to contact your broker and request a new WebApi demo account.

Live accounts should work OK without any additional adjustments from broker end.
As for the Multicharts configuration – you need to change the default demo server to the live one (wss://api.cqg.com:443).
You need to do that for both broker profile (MultiCharts->File->Broker Profiles->Manage->CQG->Edit) and data feed (QuoteManger->Tools->DataSources->CQG->Settings).

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 19 Aug 2015

and read only indicators aren't available anymore.
This issue will be fixed in MultiCharts 9.1 Beta 2.

User avatar
CrazyNasdaq
Posts: 295
Joined: 02 Sep 2009
Location: ITALY
Has thanked: 84 times
Been thanked: 84 times

Re: MULTICHARTS 9.1 BETA 1

Postby CrazyNasdaq » 19 Aug 2015

and read only indicators aren't available anymore.
This issue will be fixed in MultiCharts 9.1 Beta 2.
When Multicharts 9.1 beta 2 will be released?
Will it support CQG demo account as it was in previous release ? At the moment those who would like to test CQG with a demo account, can't do that with this new release 9.1

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 20 Aug 2015

Will it support CQG demo account as it was in previous release ? At the moment those who would like to test CQG with a demo account, can't do that with this new release 9.1
You need to get a WEB API demo account from your broker to use the CQG demo connection. If your broker is having difficulties supplying it - please ask him to contact us directly.

You can also use your live account for data and the new Paper Trader prebuilt simulator for paper trading.

User avatar
Henry MultiСharts
Posts: 9066
Joined: 25 Aug 2011
Has thanked: 1256 times
Been thanked: 2911 times

Re: MULTICHARTS 9.1 BETA 1

Postby Henry MultiСharts » 21 Aug 2015



Return to “MultiCharts”