MULTICHARTS 8.7 RELEASE [updated]
MULTICHARTS 8.7 RELEASE [updated]
MultiCharts 8.7 Release is a major upgrade that has new robust functionality and features: support for microsecond/millisecond data, Time & Sales, Tick-by-Tick Global Playback, and new discretionary and auto-trading options that give you more freedom and flexibility. MultiCharts has the full arsenal to be a successful trader.
Make sure you ask our support if you have any questions.
Learn more...
How to Migrate from MultiCharts 32 bit to MultiCharts 64 bit
https://www.multicharts.com/trading-sof ... rts_64_bit
Make sure you ask our support if you have any questions.
Learn more...
How to Migrate from MultiCharts 32 bit to MultiCharts 64 bit
https://www.multicharts.com/trading-sof ... rts_64_bit
- CrazyNasdaq
- Posts: 321
- Joined: 02 Sep 2009
- Location: ITALY
- Has thanked: 98 times
- Been thanked: 89 times
Re: MULTICHARTS 8.7 RELEASE
Hi, good work for all the improvments even if I like very much more the old resolution of bar spacing in the chart.
Multicharts 8.5 was much more clear then Multichart 8.7
For this new behaviour my vote is -1
Very good for all other new stuff
MC 8.5 DAX future 6 point chart
![Image](http://img850.imageshack.us/img850/4979/2bh.gif)
MC 8.7 DAX future 6 point chart (less bars then previous chart, worst resolution and detail)
![Image](http://img823.imageshack.us/img823/4736/17u.gif)
Multicharts 8.5 was much more clear then Multichart 8.7
For this new behaviour my vote is -1
Very good for all other new stuff
MC 8.5 DAX future 6 point chart
![Image](http://img850.imageshack.us/img850/4979/2bh.gif)
MC 8.7 DAX future 6 point chart (less bars then previous chart, worst resolution and detail)
![Image](http://img823.imageshack.us/img823/4736/17u.gif)
Last edited by CrazyNasdaq on 01 Jul 2013, edited 1 time in total.
-
- Posts: 186
- Joined: 10 May 2012
- Has thanked: 14 times
- Been thanked: 11 times
Re: MULTICHARTS 8.7 RELEASE
Where are the instructions for the feature:
"AutoLoad Workspaces based on Command Line Parameters"
?
"AutoLoad Workspaces based on Command Line Parameters"
?
Re: MULTICHARTS 8.7 RELEASE
Impressive list of new features. Well done. Of course I will first upgrade on my test PC before using it on my main one. Question: is it OK to upgrade from 8.0 straight to 8.7, or should I first upgrade to 8.5 then 8.7? My test PC is already running 8.7beta but my main one is still on 8.0.
- CrazyNasdaq
- Posts: 321
- Joined: 02 Sep 2009
- Location: ITALY
- Has thanked: 98 times
- Been thanked: 89 times
Re: MULTICHARTS 8.7 RELEASE
I definitly decide to revert to Multicharts 8.7 beta 2 which had normal and much more clear candle chart.
If you compress the chart a little bit, candles become tiny lines unreadable as candles.
In my opinion (first time in many years using Multicharts ) this kind of chart is very very bad and is impossible to make any kind of analysis on candles. You can do it only if you look at few candle miss regarding the entire movment of the market and focalizing only on the very last part of the movment.
![Image](http://img40.imageshack.us/img40/7785/yne.gif)
If you want to stay with this type of chart, please insert a flag or something else somewhere that make the customer to choose which kind of candle plot, the old one (which I prefer) or the new one. Other way I can't upgrade to any new release with this type of chart anymore in the future.
This is the first time that I'm very sad of a new feature which was not there in MC 8.7 beta 2
If you compress the chart a little bit, candles become tiny lines unreadable as candles.
In my opinion (first time in many years using Multicharts ) this kind of chart is very very bad and is impossible to make any kind of analysis on candles. You can do it only if you look at few candle miss regarding the entire movment of the market and focalizing only on the very last part of the movment.
![Image](http://img40.imageshack.us/img40/7785/yne.gif)
If you want to stay with this type of chart, please insert a flag or something else somewhere that make the customer to choose which kind of candle plot, the old one (which I prefer) or the new one. Other way I can't upgrade to any new release with this type of chart anymore in the future.
This is the first time that I'm very sad of a new feature which was not there in MC 8.7 beta 2
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 8.7 RELEASE
Hello KhaosTrader,Where are the instructions for the feature:
"AutoLoad Workspaces based on Command Line Parameters"
?
Please see the following MC Wiki article: https://www.multicharts.com/trading-sof ... Parameters
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 8.7 RELEASE
Hello,I definitly decide to revert to Multicharts 8.7 beta 2 which had normal and much more clear candle chart.
If you compress the chart a little bit, candles become tiny lines unreadable as candles.
In my opinion (first time in many years using Multicharts ) this kind of chart is very very bad and is impossible to make any kind of analysis on candles. You can do it only if you look at few candle miss regarding the entire movment of the market and focalizing only on the very last part of the movment.
If you want to stay with this type of chart, please insert a flag or something else somewhere that make the customer to choose which kind of candle plot, the old one (which I prefer) or the new one. Other way I can't upgrade to any new release with this type of chart anymore in the future.
This is the first time that I'm very sad of a new feature which was not there in MC 8.7 beta 2
The issue has already been fixed. The updated version will be available shortly. We apologize for the inconvenience.
Re: MULTICHARTS 8.7 RELEASE
Code: Select all
... this kind of chart is very very bad and is impossible to make any kind of analysis on candles
This is way stupid and don't make you more important than you are ...
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 8.7 RELEASE
Personally I don't dislike this. It gives me more data on the chart.I definitly decide to revert to Multicharts 8.7 beta 2 which had normal and much more clear candle chart.
If you compress the chart a little bit, candles become tiny lines unreadable as candles.
In my opinion (first time in many years using Multicharts ) this kind of chart is very very bad and is impossible to make any kind of analysis on candles. You can do it only if you look at few candle miss regarding the entire movment of the market and focalizing only on the very last part of the movment.
If you want to stay with this type of chart, please insert a flag or something else somewhere that make the customer to choose which kind of candle plot, the old one (which I prefer) or the new one. Other way I can't upgrade to any new release with this type of chart anymore in the future.
This is the first time that I'm very sad of a new feature which was not there in MC 8.7 beta 2
For those that do candle analysis I agree that this definitely difficult their job but when just looking at highs and lows we do have more data available.
Maybe MC could give an option (sorry guys, I know how you are against options on top of options
![Smile :)](./images/smilies/icon_smile.gif)
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 8.7 RELEASE
I can't remember if I've already spoken about this, If I did I apologize mentioning it again but this is really getting on my nerves....
How in god's name can I switch Off my "gann swing" study if the damn button is always moving?
Please, please, "hot fix" it.
http://www.screencast.com/t/otdXxQsnhXH
How in god's name can I switch Off my "gann swing" study if the damn button is always moving?
Please, please, "hot fix" it.
http://www.screencast.com/t/otdXxQsnhXH
Re: MULTICHARTS 8.7 RELEASE
I disagree .... because I like watching games like this ...How in god's name can I switch Off my "gann swing" study if the damn button is always moving?
Please, please, "hot fix" it.
http://www.screencast.com/t/otdXxQsnhXH
![Smile :)](./images/smilies/icon_smile.gif)
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 8.7 RELEASE
Hello arnie,I can't remember if I've already spoken about this, If I did I apologize mentioning it again but this is really getting on my nerves....
How in god's name can I switch Off my "gann swing" study if the damn button is always moving?
Please, please, "hot fix" it.
http://www.screencast.com/t/otdXxQsnhXH
Please uncheck the Enable Tracking Mode check box on the Status Line tab of the Format Window Window. It should solve the problem.
- CrazyNasdaq
- Posts: 321
- Joined: 02 Sep 2009
- Location: ITALY
- Has thanked: 98 times
- Been thanked: 89 times
Re: MULTICHARTS 8.7 RELEASE
I don't want to be more important than I'm, I simply want to watch my chart as I watched them before and if this hurts you, that's only you and your consideration.Come down "CRAZYNASDAQ" ... Since when you can make candle analysis in range charts ? Close is always on the high or low .... How many candles you want to load in a range chart without having it pushed together ? In a FDAX chart with 6 point (3 full points) range chart ? LOL .... Big Time LoL !!!Code: Select all
... this kind of chart is very very bad and is impossible to make any kind of analysis on candles
This is way stupid and don't make you more important than you are ...
Here, we use to say "be clear, be happy and leave other people do their job".
Re: MULTICHARTS 8.7 RELEASE
2 Cents only ....
When you are talking or complaining about prob's where no prob's are, well done.
1.
From theoretically standpoint it should be obvious that if you are putting more and more data in a fixed (MC chart) visible time frame it is not possible to show the data in the same resolution like less data. There always will be a point where visibility is a problem if you expect to have the same visibility with much more data. It's like an equation. If you change just one variable in 99% there will be another result. To have the same result you have to change more than one variable or to leave it like it is. It is so simple.
2.
Never saw someone analyzing candles 200 bars away from the current price .... Not in 5min Charts nor in 6 point range charts .... So there is no problem with visibility ... Use bar charts instead of candles in you 6 point range chart ... The outcome is the same (!!!) and you will have much much much more visibility ....
Conclusion : USER - problem
When you are talking or complaining about prob's where no prob's are, well done.
1.
From theoretically standpoint it should be obvious that if you are putting more and more data in a fixed (MC chart) visible time frame it is not possible to show the data in the same resolution like less data. There always will be a point where visibility is a problem if you expect to have the same visibility with much more data. It's like an equation. If you change just one variable in 99% there will be another result. To have the same result you have to change more than one variable or to leave it like it is. It is so simple.
2.
Never saw someone analyzing candles 200 bars away from the current price .... Not in 5min Charts nor in 6 point range charts .... So there is no problem with visibility ... Use bar charts instead of candles in you 6 point range chart ... The outcome is the same (!!!) and you will have much much much more visibility ....
Conclusion : USER - problem
Re: MULTICHARTS 8.7 RELEASE
•Added a Jump tool that lets you jump to needed bars and dates without scrolling. More info here - https://www.multicharts.com/pm/viewissu ... no=MC-1200 .
Is this already implemented? I couldn't find it yet...
Is this already implemented? I couldn't find it yet...
-
- Posts: 401
- Joined: 19 Jan 2011
- Location: Netherlands
- Has thanked: 85 times
- Been thanked: 125 times
Re: MULTICHARTS 8.7 RELEASE
Seneca,
Select a chart. Then go to the top op the screen and select view (next to file). Then go to
"go to specified bar". Shortcut is ctrl+G.
And thank you to the MC team for 8.7 release. The opening of the workspaces is fast!
Select a chart. Then go to the top op the screen and select view (next to file). Then go to
"go to specified bar". Shortcut is ctrl+G.
And thank you to the MC team for 8.7 release. The opening of the workspaces is fast!
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 8.7 RELEASE
Hello seneca,•Added a Jump tool that lets you jump to needed bars and dates without scrolling. More info here - https://www.multicharts.com/pm/viewissu ... no=MC-1200 .
Is this already implemented? I couldn't find it yet...
The feature is called Go To Specified Bar. Please see the description here: https://www.multicharts.com/trading-sof ... cified_Bar
- swz168
- Posts: 120
- Joined: 30 Sep 2010
- Location: Germany
- Has thanked: 47 times
- Been thanked: 32 times
Re: MULTICHARTS 8.7 RELEASE
For (semi) autotrading, it is quite annoying that auto trading is always switched of if
- input paramater change
- instrument setting changed
- indicators changed (added/deleted, parameters changed)
etc.
What I like to see is, before switching of auto trading, Multicharts should asked, wether autotrading
should be switched of. MC should also be able to remember what was chosen, so that if needed,
no confirmation will be asked.
Here is the PM: https://www.multicharts.com/pm/viewissu ... no=MC-1393
- input paramater change
- instrument setting changed
- indicators changed (added/deleted, parameters changed)
etc.
What I like to see is, before switching of auto trading, Multicharts should asked, wether autotrading
should be switched of. MC should also be able to remember what was chosen, so that if needed,
no confirmation will be asked.
Here is the PM: https://www.multicharts.com/pm/viewissu ... no=MC-1393
-
- Posts: 176
- Joined: 02 Feb 2008
- Location: Lausanne, Switzerland
- Has thanked: 9 times
- Been thanked: 5 times
Re: MULTICHARTS 8.7 RELEASE
Hi,
I just draw the "Fibonacci Retracement Price Lines", but there seems to be issues with those: You can't select them, you can't delete them, they don't appear in the drawings view, and the scale change when scrolling the graph.
Thierry
I just draw the "Fibonacci Retracement Price Lines", but there seems to be issues with those: You can't select them, you can't delete them, they don't appear in the drawings view, and the scale change when scrolling the graph.
Thierry
- Dave Masalov
- Posts: 1712
- Joined: 16 Apr 2010
- Has thanked: 51 times
- Been thanked: 489 times
Re: MULTICHARTS 8.7 RELEASE
Hello Thierry,Hi,
I just draw the "Fibonacci Retracement Price Lines", but there seems to be issues with those: You can't select them, you can't delete them, they don't appear in the drawings view, and the scale change when scrolling the graph.
Thierry
We failed to reproduce the issue on our end. Please come to our Live Chat Mon-Fri from 6:30 AM to 1 PM EST so we can help you: http://messenger.providesupport.com/mes ... pport.html
- Laurentius
- Posts: 90
- Joined: 01 Jan 2011
- Location: Europe
- Has thanked: 138 times
- Been thanked: 36 times
Re: MULTICHARTS 8.7 RELEASE
Thanks for bringing it up Swz168. Kind of bothersome the way it is now.Thanks for the great update.
I have a suggestion for the trading side bar:
- Laurentius
- Posts: 90
- Joined: 01 Jan 2011
- Location: Europe
- Has thanked: 138 times
- Been thanked: 36 times
Re: MULTICHARTS 8.7 RELEASE
First thank you for the new release and thank you for fixing the issue so soon. Looking forward to the download.Hello,I definitly decide to revert to Multicharts 8.7 beta 2 which had normal and much more clear candle chart...
The issue has already been fixed. The updated version will be available shortly. We apologize for the inconvenience.
While we are at it regarding candle appearance it would also be nice if there would be a feature upgrade regarding the spacing in between thicker candles, as with for example "Bar Spacing" 8 and 12. The way it is now is a kind of "old fashioned". Meaning, starting with "Bar Spacing" 4 one have the option with the same bar thickness to have both 1, 2, 3 and 4 pixels between the candles, but when coming to the candle thickness appearing with "Bar Spacing" 8 one are forced to have no less than 3 pixels between the candles. This takes unnecessary space in the cart. Personally I would like to have 1 pixel in between all candle sizes since this gives me a better feel with the continuity of the candles for each swing in a market.
I have just posted a feature request with a picture which illustrates the difference between 1 and 3 pixels between the candles with size given in MultiCharts setting "Bar Spacing" to 8 here: https://www.multicharts.com/pm/viewissu ... no=MC-1394
Laurentius
- CrazyNasdaq
- Posts: 321
- Joined: 02 Sep 2009
- Location: ITALY
- Has thanked: 98 times
- Been thanked: 89 times
Re: MULTICHARTS 8.7 RELEASE
You are very welcome Dave !!!Hello,
The issue has already been fixed. The updated version will be available shortly. We apologize for the inconvenience.
Very glad to ear that the issue will be fixed.
Multicharts is alway the best.
Regards
- konstantin
- Posts: 69
- Joined: 24 Dec 2007
- Location: Europe
- Has thanked: 2 times
- Been thanked: 1 time
Re: MULTICHARTS 8.7 RELEASE
When will it be available?Hello,I definitly decide to revert to Multicharts 8.7 beta 2 which had normal and much more clear candle chart.
If you compress the chart a little bit, candles become tiny lines unreadable as candles.
In my opinion (first time in many years using Multicharts ) this kind of chart is very very bad and is impossible to make any kind of analysis on candles. You can do it only if you look at few candle miss regarding the entire movment of the market and focalizing only on the very last part of the movment.
If you want to stay with this type of chart, please insert a flag or something else somewhere that make the customer to choose which kind of candle plot, the old one (which I prefer) or the new one. Other way I can't upgrade to any new release with this type of chart anymore in the future.
This is the first time that I'm very sad of a new feature which was not there in MC 8.7 beta 2
The issue has already been fixed. The updated version will be available shortly. We apologize for the inconvenience.
Re: MULTICHARTS 8.7 RELEASE
I plot the NYSE-TICK (USD Index from InteractiveBrokers). I use a simple 1 minute bar chart with a 1 period moving average. It worked fine in Beta 2 but does not plot in the Release. It loads but does not update. The data updates in the Status Line on the chart but the bars remain unchanged. I've reverted to Beta 2 and it works fine so it's not an IB change. Anyone see this or is it my setup?
Re: MULTICHARTS 8.7 RELEASE
Something weird is up with MulltiCharts (mine, that is) since I installed the release version of 8.7
1) Using DTN/IQ I am unable to get TICK.Z and other such breadth symbols to plot since Wednesday, July 3, using "default" setting for exchange times. I am able to get them to plot using a custom setting that mimics NYSE, but they won't plot at all past 11:01 am NYC time.
2) Studies involving NYSE/NASDAQ issues on multiple-data charts (eg, plot ES as data1, while data2, data3, data4, etc., are hidden and used to compute values for indicator) do not plot at all after Wednesday, July 3.
Tearing my hair out here. Any suggestions? Thanks
1) Using DTN/IQ I am unable to get TICK.Z and other such breadth symbols to plot since Wednesday, July 3, using "default" setting for exchange times. I am able to get them to plot using a custom setting that mimics NYSE, but they won't plot at all past 11:01 am NYC time.
2) Studies involving NYSE/NASDAQ issues on multiple-data charts (eg, plot ES as data1, while data2, data3, data4, etc., are hidden and used to compute values for indicator) do not plot at all after Wednesday, July 3.
Tearing my hair out here. Any suggestions? Thanks
Re: MULTICHARTS 8.7 RELEASE
I think I've just discovered something. I have no problem plotting these symbols with minute data. But if I try to plot, say, a 30 second bar...no dice.
Bug? Or am I doing something stupid?
Bug? Or am I doing something stupid?
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
That is ok to upgrade from MultiCharts 8.0 straight to MultiCharts 8.7Impressive list of new features. Well done. Of course I will first upgrade on my test PC before using it on my main one. Question: is it OK to upgrade from 8.0 straight to 8.7, or should I first upgrade to 8.5 then 8.7? My test PC is already running 8.7beta but my main one is still on 8.0.
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Thank you for your suggestion. It has been forwarded to our developers.Thanks for the great update.
I have a suggestion for the trading side bar:
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
This issue has been confirmed. It will be resolved in the next version of MultiCharts.I just draw the "Fibonacci Retracement Price Lines", but there seems to be issues with those: You can't select them, you can't delete them, they don't appear in the drawings view, and the scale change when scrolling the graph.Thierry
The problem is that the drawing is applied to an indicator, not to a dataseries. When you switch off the indicator the drawing remains on its place (though it should be hidden as well). In order to workaround the issue you need to right click on your chart->Visual order->select the data series->Send to back. After that is done-plot your drawing.
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
We are analyzing this case.Something weird is up with MulltiCharts (mine, that is) since I installed the release version of 8.7
1) Using DTN/IQ I am unable to get TICK.Z and other such breadth symbols to plot since Wednesday, July 3, using "default" setting for exchange times. I am able to get them to plot using a custom setting that mimics NYSE, but they won't plot at all past 11:01 am NYC time.
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Hello JackR,I plot the NYSE-TICK (USD Index from InteractiveBrokers). I use a simple 1 minute bar chart with a 1 period moving average. It worked fine in Beta 2 but does not plot in the Release. It loads but does not update. The data updates in the Status Line on the chart but the bars remain unchanged. I've reverted to Beta 2 and it works fine so it's not an IB change. Anyone see this or is it my setup?
Is this the only chart with this behavior? Are other instruments updating fine in realtime?
What if you go to Format->Instrument->Settings tab->Sessions->Select 24/7 - does the chart start to update with realtime data?
Re: MULTICHARTS 8.7 RELEASE
The workspace has two charts, the YM and the NYSE-TICK. The YM plots, TICK does not. Both are 1 minute. I reverted to 8.7 Beta 2, so I'll have to reload the Release and check next week and advise.. The TICK is only available during regular NYSE hours but I'll try the 24/7 setting next week as well.Hello JackR,I plot the NYSE-TICK (USD Index from InteractiveBrokers). I use a simple 1 minute bar chart with a 1 period moving average. It worked fine in Beta 2 but does not plot in the Release. It loads but does not update. The data updates in the Status Line on the chart but the bars remain unchanged. I've reverted to Beta 2 and it works fine so it's not an IB change. Anyone see this or is it my setup?
Is this the only chart with this behavior? Are other instruments updating fine in realtime?
What if you go to Format->Instrument->Settings tab->Sessions->Select 24/7 - does the chart start to update with realtime data?
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
It should become available in the nearest couple of days.When will it be available?The issue has already been fixed. The updated version will be available shortly. We apologize for the inconvenience.
Re: MULTICHARTS 8.7 RELEASE
Loaded "Release"(Ver 7409) The problem returned. It did not clear when the Session was set to 24/7. I also added the TRIN-NYSE as another chart and it exhibits the same problem. Status line numbers change - chart plot does not update. Normal instruments I watch (all futures from IB feed) work fine. So something you changed between the Beta 2 and the Release is the cause. I'm running TWS 936.6.The workspace has two charts, the YM and the NYSE-TICK. The YM plots, TICK does not. Both are 1 minute. I reverted to 8.7 Beta 2, so I'll have to reload the Release and check next week and advise.. The TICK is only available during regular NYSE hours but I'll try the 24/7 setting next week as well.Hello JackR,I plot the NYSE-TICK (USD Index from InteractiveBrokers). I use a simple 1 minute bar chart with a 1 period moving average. It worked fine in Beta 2 but does not plot in the Release. It loads but does not update. The data updates in the Status Line on the chart but the bars remain unchanged. I've reverted to Beta 2 and it works fine so it's not an IB change. Anyone see this or is it my setup?
Is this the only chart with this behavior? Are other instruments updating fine in realtime?
What if you go to Format->Instrument->Settings tab->Sessions->Select 24/7 - does the chart start to update with realtime data?
Last edited by JackR on 08 Jul 2013, edited 1 time in total.
-
- Posts: 742
- Joined: 09 Apr 2010
- Location: Texas
- Has thanked: 483 times
- Been thanked: 274 times
- Contact:
Re: MULTICHARTS 8.7 RELEASE
*******************************************************************Using DTNIQ symbols from NYSE and NASDAQ don't plot, back fill works and status line updates with each tick but the charts don't update. Futures plot fine.
I just noticed the same thing- AAPL chart attached,you can see no chart update but status line is OK.. ( I usually track futures only)..
- Attachments
-
- AApl-no update.png
- (22.51 KiB) Downloaded 10285 times
Last edited by sptrader on 08 Jul 2013, edited 1 time in total.
Re: MULTICHARTS 8.7 RELEASE
I restarted MC and it is working now, but there is something seriously wrong to make it do that.*******************************************************************Using DTNIQ symbols from NYSE and NASDAQ don't plot, back fill works and status line updates with each tick but the charts don't update. Futures plot fine.
I just noticed the same thing- AAPL chart attached,you can see no updates buy status line is OK.. ( I usually track futures only)..
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Hi, good work for all the improvments even if I like very much more the old resolution of bar spacing in the chart.Multicharts 8.5 was much more clear then Multichart 8.7
I see what you mean. The new chart looks terrible. No thanks I won't be upgrading until it's fixed.
First thank you for the new release and thank you for fixing the issue so soon. Looking forward to the download.
The new build with the candlestick fix has been uploaded. Please update.When will it be available?
MultiCharts download page
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
We are analyzing this case.Loaded "Release"(Ver 7409) The problem returned. It did not clear when the Session was set to 24/7. I also added the TRIN-NYSE as another chart and it exhibits the same problem. Status line numbers change - chart plot does not update. Normal instruments I watch (all futures from IB feed) work fine. So something you changed between the Beta 2 and the Release is the cause. I'm running TWS 936.6.
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
The status line time and current time difference is 15 minutes. That means your account is 15 minutes delayed. You will see realtime chart updates only in 15 minutes after opening a chart.I just noticed the same thing- AAPL chart attached,you can see no chart update but status line is OK.. ( I usually track futures only)..
If you need a non-delayed realtime data account-please contact your data provider directly.
- ABC
- Posts: 721
- Joined: 16 Dec 2006
- Location: www.abctradinggroup.com
- Has thanked: 125 times
- Been thanked: 409 times
- Contact:
Re: MULTICHARTS 8.7 RELEASE
At least one third party add-on uses common open source functions and they overwrite existing Global Variable functions. This becomes a problem for MC users, when they want to export studies using these functions in an open format and not as SEF.
![Image](http://www.multicharts.com/discussion/download/file.php?id=6577)
A developer shouldn't use standard functions without at least renaming them, if he wants to protect them as SEF. Please make them aware of it and change it, for the benefit of all other MC users.
This problem exists for some time already and with every update you have to delete them, re-import the original functions and recompile every study using these functions.
Thank you,
ABC
A developer shouldn't use standard functions without at least renaming them, if he wants to protect them as SEF. Please make them aware of it and change it, for the benefit of all other MC users.
This problem exists for some time already and with every update you have to delete them, re-import the original functions and recompile every study using these functions.
Thank you,
ABC
- Attachments
-
- GVfunctions.PNG
- (4.5 KiB) Downloaded 11959 times
- TJ
- Posts: 7743
- Joined: 29 Aug 2006
- Location: Global Citizen
- Has thanked: 1033 times
- Been thanked: 2222 times
Re: MULTICHARTS 8.7 RELEASE
I think there should be an option for the 3rd party add-on.At least one third party add-on uses common open source functions and they overwrite existing Global Variable functions. This becomes a problem for MC users, when they want to export studies using these functions in an open format and not as SEF.
A developer shouldn't use standard functions without at least renaming them, if he wants to protect them as SEF. Please make them aware of it and change it, for the benefit of all other MC users.
This problem exists for some time already and with every update you have to delete them, re-import the original functions and recompile every study using these functions.
Thank you,
ABC
They should to be added ONLY if the users need them.
- ABC
- Posts: 721
- Joined: 16 Dec 2006
- Location: www.abctradinggroup.com
- Has thanked: 125 times
- Been thanked: 409 times
- Contact:
Re: MULTICHARTS 8.7 RELEASE
That would be great, too.I think there should be an option for the 3rd party add-on.
They should to be added ONLY if the users need them.
-
- Posts: 742
- Joined: 09 Apr 2010
- Location: Texas
- Has thanked: 483 times
- Been thanked: 274 times
- Contact:
Re: MULTICHARTS 8.7 RELEASE
********************************************************************That would be great, too.I think there should be an option for the 3rd party add-on.
They should to be added ONLY if the users need them.
** I agree, I made the suggestion of an "Optional" third party software install, a couple of years ago, they are a nuisance to remove, which I do after every update installation....
MC may get a "kick back" from third party developers for auto installing it, but there should be an easy way for users to remove it afterwards, if desired...
- TJ
- Posts: 7743
- Joined: 29 Aug 2006
- Location: Global Citizen
- Has thanked: 1033 times
- Been thanked: 2222 times
Re: MULTICHARTS 8.7 RELEASE
Removing the indicators is easy, the problem is in the open source functions that they locked up.********************************************************************That would be great, too.I think there should be an option for the 3rd party add-on.
They should to be added ONLY if the users need them.
** I agree, I made the suggestion of an "Optional" third party software install, a couple of years ago, they are a nuisance to remove, which I do after every update installation....
MC may get a "kick back" from third party developers for auto installing it, but there should be an easy way for users to remove it afterwards, if desired...
-
- Posts: 176
- Joined: 02 Feb 2008
- Location: Lausanne, Switzerland
- Has thanked: 9 times
- Been thanked: 5 times
Re: MULTICHARTS 8.7 RELEASE
Hi,
With the latest build (7432), I noticed 2 small issues (which may or not be specific to this build).
1) Upon installation, not all indicators get compiled. Once the installation is done with all check box enabled, you can still go to the editor and compile "all uncompiled" to have the left over successfully compiled.
2) Sometimes, when the editor is called from the indicator in MC, there seems to be an issue with the gutter. It appears on top of the text and does not give the ability to scroll the text back to its original position. The issue can be solved by de-activating and re-enabling the gutter, which then positions the text correctly.
Thierry
With the latest build (7432), I noticed 2 small issues (which may or not be specific to this build).
1) Upon installation, not all indicators get compiled. Once the installation is done with all check box enabled, you can still go to the editor and compile "all uncompiled" to have the left over successfully compiled.
2) Sometimes, when the editor is called from the indicator in MC, there seems to be an issue with the gutter. It appears on top of the text and does not give the ability to scroll the text back to its original position. The issue can be solved by de-activating and re-enabling the gutter, which then positions the text correctly.
Thierry
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 8.7 RELEASE
1) Upon installation, not all indicators get compiled. Once the installation is done with all check box enabled, you can still go to the editor and compile "all uncompiled" to have the left over successfully compiled.
Actually this is something that has been happening since the first 8.5 version if I'm not mistaken.
-
- Posts: 176
- Joined: 02 Feb 2008
- Location: Lausanne, Switzerland
- Has thanked: 9 times
- Been thanked: 5 times
Re: MULTICHARTS 8.7 RELEASE
Here is another calculation/scaling issue which I don't quite understand.
- Data1 is USDCHF 240 and data2 is USDCHF 1440.
- I am applying the "bollinger bands" indicator with the "bollinger price" set to "c data2".
- In "format study", the study is based on Data1 and the "scaling range" is set to "same as instrument".
The value for the Bollinger bands does not match (refering to the averageFC, not the standard dev).
It seems the scaling issue results from the calculation, as the data indicated in the data window for the mid line value (which is an AverageFC of the price over the last 5 bars) should not be in the 0.7 value area (for neither data1 or data2).
Thierry
- Data1 is USDCHF 240 and data2 is USDCHF 1440.
- I am applying the "bollinger bands" indicator with the "bollinger price" set to "c data2".
- In "format study", the study is based on Data1 and the "scaling range" is set to "same as instrument".
The value for the Bollinger bands does not match (refering to the averageFC, not the standard dev).
It seems the scaling issue results from the calculation, as the data indicated in the data window for the mid line value (which is an AverageFC of the price over the last 5 bars) should not be in the 0.7 value area (for neither data1 or data2).
Thierry
- Attachments
-
- MC8.7b7432_glitch.png
- Screen capture with data window value
- (65.62 KiB) Downloaded 10318 times
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
I plot the NYSE-TICK (USD Index from InteractiveBrokers). I use a simple 1 minute bar chart with a 1 period moving average. It worked fine in Beta 2 but does not plot in the Release. It loads but does not update. The data updates in the Status Line on the chart but the bars remain unchanged. I've reverted to Beta 2 and it works fine so it's not an IB change. Anyone see this or is it my setup?
JackR, tortoise, what exchange is specified for TICK instrument?1) Using DTN/IQ I am unable to get TICK.Z and other such breadth symbols to plot since Wednesday, July 3, using "default" setting for exchange times. I am able to get them to plot using a custom setting that mimics NYSE, but they won't plot at all past 11:01 am NYC time.
Please change the exchange to UNDEF. Go to File->New->QuoteManager window->right click on TICK symbol->Edit symbol->Settings->select UNDEF exchange. After that is done - plot a new chart for TICK symbol. Are you able to get realtime data now?
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
In case you need the study to be calculated on data2-you need to set the "Base study on" option to Data2.Here is another calculation/scaling issue which I don't quite understand.
- Data1 is USDCHF 240 and data2 is USDCHF 1440.
- I am applying the "bollinger bands" indicator with the "bollinger price" set to "c data2".
- In "format study", the study is based on Data1 and the "scaling range" is set to "same as instrument".
The value for the Bollinger bands does not match (refering to the averageFC, not the standard dev).
It seems the scaling issue results from the calculation, as the data indicated in the data window for the mid line value (which is an AverageFC of the price over the last 5 bars) should not be in the 0.7 value area (for neither data1 or data2).
Thierry
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
1) Upon installation, not all indicators get compiled. Once the installation is done with all check box enabled, you can still go to the editor and compile "all uncompiled" to have the left over successfully compiled.
Are all of the studies compiled after going to the editor and compiling "all uncompiled" or there are still some studies that cannot be compiled?Actually this is something that has been happening since the first 8.5 version if I'm not mistaken.
Are you able to replciate this behavior on a constant basis? What are the exact steps to replciate that? Please attach screenshots demonstrating it.2) Sometimes, when the editor is called from the indicator in MC, there seems to be an issue with the gutter. It appears on top of the text and does not give the ability to scroll the text back to its original position. The issue can be solved by de-activating and re-enabling the gutter, which then positions the text correctly.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 8.7 RELEASE
What I've been seen is while installing MC and checking it to compile the studies, after installation, if I go to the PLE, select Compile All Uncompiled, there will be always a coupled of ones not compiled.Are all of the studies compiled after going to the editor and compiling "all uncompiled" or there are still some studies that cannot be compiled?
I always found this strange since they should all compile while installing MC but since sometimes I do the installation without compiling the studies so it runs a bit faster, it has not been a real issue.
-
- Posts: 176
- Joined: 02 Feb 2008
- Location: Lausanne, Switzerland
- Has thanked: 9 times
- Been thanked: 5 times
Re: MULTICHARTS 8.7 RELEASE
It seems that only some studies are left uncompiled during installation. They compiled fine from the language editor though.1) Upon installation, not all indicators get compiled. Once the installation is done with all check box enabled, you can still go to the editor and compile "all uncompiled" to have the left over successfully compiled.Are all of the studies compiled after going to the editor and compiling "all uncompiled" or there are still some studies that cannot be compiled?Actually this is something that has been happening since the first 8.5 version if I'm not mistaken.
2) Sometimes, when the editor is called from the indicator in MC, there seems to be an issue with the gutter. It appears on top of the text and does not give the ability to scroll the text back to its original position. The issue can be solved by de-activating and re-enabling the gutter, which then positions the text correctly.
The context is as follow:Are you able to replciate this behavior on a constant basis? What are the exact steps to replciate that? Please attach screenshots demonstrating it.
- PowerLanguage Editor is already opened with several studies
- From MC, I select an indicator and click on "Open xxx Script".
I had the issue occuring several times but not systematically and I can't manage to reproduce it right now. I'll post a screen shot next time I encounter this behaviour.
Thierry
-
- Posts: 176
- Joined: 02 Feb 2008
- Location: Lausanne, Switzerland
- Has thanked: 9 times
- Been thanked: 5 times
Re: MULTICHARTS 8.7 RELEASE
Hello Henry,In case you need the study to be calculated on data2-you need to set the "Base study on" option to Data2.Here is another calculation/scaling issue which I don't quite understand.
- Data1 is USDCHF 240 and data2 is USDCHF 1440.
- I am applying the "bollinger bands" indicator with the "bollinger price" set to "c data2".
- In "format study", the study is based on Data1 and the "scaling range" is set to "same as instrument".
The value for the Bollinger bands does not match (refering to the averageFC, not the standard dev).
It seems the scaling issue results from the calculation, as the data indicated in the data window for the mid line value (which is an AverageFC of the price over the last 5 bars) should not be in the 0.7 value area (for neither data1 or data2).
Thierry
I disagree with your statement.
When dealing with multi timeframes indicators, it is useful to have the result plot on screen. I have several indicators whose values are based on dataX calculations and intrabarpersist of data1.
If you set "base study on Data2", you can't benefit from intrabarpersist of data1 and the resulting display will be different and will not match the scale of data1.
As for now, I'll take into account that there are limitations with some indicators. For your info, the following code displays correctly on data1, although it's uses data2 calculations.
Code: Select all
input: data_number(2), TimeLength(2),
Displace(0),
upColour(cyan),
downColour(darkRed);
vars: intrabarpersist Hprice(0),
intrabarpersist LPrice(0),
intrabarpersist MPrice(0),
color.value(yellow),colourDeltaBar(1);
color.value = yellow;
//Range Calculations
HPrice = Highest(H, TimeLength)of data(data_number);
LPrice = Lowest(L, TimeLength)of data(data_number);
MPrice = (HPrice + LPrice)/2 of data(data_number);
//Plot
plot11[Displace](HPrice,"HighPrice");
plot12[Displace](LPrice,"LowPrice");
plot13[Displace](MPrice,"MidRangePrice");
{ Color criterions }
if (MPrice > MPrice[1]) then color.value = upColour
else if (MPrice < MPrice [1]) then color.value = downColour
else if (MPrice = MPrice [1]) then color.value = color.value[1];
SetPlotColor[colourDeltaBar](11,color.value);
SetPlotColor[colourDeltaBar](12,color.value);
SetPlotColor[colourDeltaBar](13,color.value);
Re: MULTICHARTS 8.7 RELEASE
There are large differences in the Volume profile ladder delta between MC and other platforms.
Taking The Bund as an example today 12 June at the high formed around 7:37 at 143.29
The discrepancies are particularly large at 143.28
MC shows
1500 traded on the ask at 143.29 0 on the bid
1270 traded on the ask at 143.28 2720 on the bid
NT with GomVolumeladder
1421 traded on the ask at 143.29 76 on the bid
2101 traded on the ask at 143.28 1882 on the bid
Jigsaw Trading
1421 traded on the ask at 143.29 76 on the bid
1955 traded on the ask at 143.28 1874 on the bid
Taking The Bund as an example today 12 June at the high formed around 7:37 at 143.29
The discrepancies are particularly large at 143.28
MC shows
1500 traded on the ask at 143.29 0 on the bid
1270 traded on the ask at 143.28 2720 on the bid
NT with GomVolumeladder
1421 traded on the ask at 143.29 76 on the bid
2101 traded on the ask at 143.28 1882 on the bid
Jigsaw Trading
1421 traded on the ask at 143.29 76 on the bid
1955 traded on the ask at 143.28 1874 on the bid
Last edited by jl12 on 12 Jul 2013, edited 1 time in total.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 8.7 RELEASE
Hey guys, what quotes are those seen on the naked VA and POC?
126 30/64?
126.54/64?
Should they be 126 15/32 and 126 27/32?
![Image](http://www.multicharts.com/discussion/download/file.php?id=6593)
126 30/64?
126.54/64?
Should they be 126 15/32 and 126 27/32?
- Attachments
-
- bonds_quotes.png
- (43.56 KiB) Downloaded 11880 times
Re: MULTICHARTS 8.7 RELEASE
Same here, we had that problem earlier on 8.5 beta 2, sometimes a reload helped.Is it me or something's wrong with cumulative delta?
up/down ticks is identical to ask/bid
viewtopic.php?f=1&t=11659&p=57380&hilit ... ick#p57380
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Please send me the following information for further investigation:Is it me or something's wrong with cumulative delta?
up/down ticks is identical to ask/bid
- workspace you are using;
- in QuoteManager select the symbol you are using, make a right click on it->Export data->Export instrument (with data). Send me the Qmd export file for analysis.
Does it help if you reload the chart?
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Please send me the following information for further investigation:Hey guys, what quotes are those seen on the naked VA and POC?
126 30/64?
126.54/64?
Should they be 126 15/32 and 126 27/32?
- workspace you are using;
- in QuoteManager select the symbol you are using, make a right click on it->Export data->Export instrument (without data). Send me the Qmd export file for analysis.
What is the exact build of MC 8.7 you are currently running?
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Are these trading platforms using the same data provider and are getting exactly the same quotes as your MultiCharts? What is your chart resolution?There are large differences in the Volume profile ladder delta between MC and other platforms.
Taking The Bund as an example today 12 June at the high formed around 7:37 at 143.29
The discrepancies are particularly large at 143.28
MC shows
1500 traded on the ask at 143.29 0 on the bid
1270 traded on the ask at 143.28 2720 on the bid
NT with GomVolumeladder
1421 traded on the ask at 143.29 76 on the bid
2101 traded on the ask at 143.28 1882 on the bid
Jigsaw Trading
1421 traded on the ask at 143.29 76 on the bid
1955 traded on the ask at 143.28 1874 on the bid
Re: MULTICHARTS 8.7 RELEASE
It looks like this has been corrected in Release version 7432. NYSE-TICK now plots.I plot the NYSE-TICK (USD Index from InteractiveBrokers). I use a simple 1 minute bar chart with a 1 period moving average. It worked fine in Beta 2 but does not plot in the Release. It loads but does not update. The data updates in the Status Line on the chart but the bars remain unchanged. I've reverted to Beta 2 and it works fine so it's not an IB change. Anyone see this or is it my setup?
Re: MULTICHARTS 8.7 RELEASE
The data feed is the same IQ.
The resoution is set 6 points. The issue remains on other resolutions.
The resoution is set 6 points. The issue remains on other resolutions.
Are these trading platforms using the same data provider and are getting exactly the same quotes as your MultiCharts? What is your chart resolution?There are large differences in the Volume profile ladder delta between MC and other platforms.
Taking The Bund as an example today 12 June at the high formed around 7:37 at 143.29
The discrepancies are particularly large at 143.28
MC shows
1500 traded on the ask at 143.29 0 on the bid
1270 traded on the ask at 143.28 2720 on the bid
NT with GomVolumeladder
1421 traded on the ask at 143.29 76 on the bid
2101 traded on the ask at 143.28 1882 on the bid
Jigsaw Trading
1421 traded on the ask at 143.29 76 on the bid
1955 traded on the ask at 143.28 1874 on the bid
Re: MULTICHARTS 8.7 RELEASE
Upgraded from 8.5 to 8.7.7408 yesterday
eSignal - all charts plot
IB - none plot
Upgraded to 8.7.7431 today
eSignal - only some charts plot
IB - only some plot
Could you give me the download link of 8.5? Thanks.
eSignal - all charts plot
IB - none plot
Upgraded to 8.7.7431 today
eSignal - only some charts plot
IB - only some plot
Could you give me the download link of 8.5? Thanks.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 8.7 RELEASE
That's strange.Upgraded from 8.5 to 8.7.7408 yesterday
eSignal - all charts plot
IB - none plot
Upgraded to 8.7.7431 today
eSignal - only some charts plot
IB - only some plot
Could you give me the download link of 8.5? Thanks.
Have you gone to live chat so support can look at it?
Is this happening on your usual workspace or with fresh new charts on a new workspace? Sometimes workspaces from previous versions get corrupted.
Re: MULTICHARTS 8.7 RELEASE
Whoops. Looks like that was a fluke. Bug back again. Will start working with Support again.It looks like this has been corrected in Release version 7432. NYSE-TICK now plots.I plot the NYSE-TICK (USD Index from InteractiveBrokers). I use a simple 1 minute bar chart with a 1 period moving average. It worked fine in Beta 2 but does not plot in the Release. It loads but does not update. The data updates in the Status Line on the chart but the bars remain unchanged. I've reverted to Beta 2 and it works fine so it's not an IB change. Anyone see this or is it my setup?
-
- Posts: 742
- Joined: 09 Apr 2010
- Location: Texas
- Has thanked: 483 times
- Been thanked: 274 times
- Contact:
Re: MULTICHARTS 8.7 RELEASE
I use IQfeed and the SAME thing happened to me yesterday when I tried to use 7432.. No indices would plot (IINA.Z, IIND.Z, IINU.Z etc)
I had to go back to the previous MC 8.7 release to make it work with Iqfeed indices...
Definitely seems to be a BUG..
I had to go back to the previous MC 8.7 release to make it work with Iqfeed indices...
Definitely seems to be a BUG..
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Please update to the latest build of MultiCharts 8.7 Release (7471/7472) and come to our live chat Monday-Friday 6:30 am - 4 pm EST if this solution didn't help and you still have the issue. We will be able to connect to your PC remotely and collect all of the required for analysis information.Upgraded from 8.5 to 8.7.7408 yesterday
eSignal - all charts plot
IB - none plot
Upgraded to 8.7.7431 today
eSignal - only some charts plot
IB - only some plot
Re: MULTICHARTS 8.7 RELEASE
Hi Henry,
seems that the download link leads to a 64-bit release 8.7.7471.400 with 97,6 MB instead of 8.7.7472 with 102,3 MB .
seems that the download link leads to a 64-bit release 8.7.7471.400 with 97,6 MB instead of 8.7.7472 with 102,3 MB .
- Attachments
-
- DL Link.jpg
- (31.55 KiB) Downloaded 10285 times
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Download links are correct.Hi Henry,
seems that the download link leads to a 64-bit release 8.7.7471.400 with 97,6 MB instead of 8.7.7472 with 102,3 MB .
32 bit 8.7.7471 is 72 mb
64 bit 8.7.7472 is 97.6 mb
-
- Posts: 742
- Joined: 09 Apr 2010
- Location: Texas
- Has thanked: 483 times
- Been thanked: 274 times
- Contact:
Re: MULTICHARTS 8.7 RELEASE
**************************************************************I use IQfeed and the SAME thing happened to me yesterday when I tried to use 7432.. No indices would plot (IINA.Z, IIND.Z, IINU.Z etc)
I had to go back to the previous MC 8.7 release to make it work with Iqfeed indices...
Definitely seems to be a BUG..
* IQ feed indices ARE working with the new build 7472.400 -- Thanks !!!
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
JackR, please update to the latest build of MultiCharts 8.7 Release (7471/7472) and follow the instructions from my email to provide the details we need for analysis.Whoops. Looks like that was a fluke. Bug back again. Will start working with Support again.
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
The data feed is the same IQ.
The resoution is set 6 points. The issue remains on other resolutions.There are large differences in the Volume profile ladder delta between MC and other platforms.
Is the difference corrected if you reload the chart in MultiCharts?
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Yes, they should be 126 15/32 and 126 27/32. This issue has been confirmed. It will be fixed in one of the future versions.Hey guys, what quotes are those seen on the naked VA and POC?
126 30/64?
126.54/64?
Should they be 126 15/32 and 126 27/32?
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
This issue has been confirmed. It will be fixed in one of the future versions.Is it me or something's wrong with cumulative delta?
up/down ticks is identical to ask/bid
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 8.7 RELEASE
Do you have a time table for it?This issue has been confirmed. It will be fixed in one of the future versions.Is it me or something's wrong with cumulative delta?
up/down ticks is identical to ask/bid
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
2) Sometimes, when the editor is called from the indicator in MC, there seems to be an issue with the gutter. It appears on top of the text and does not give the ability to scroll the text back to its original position. The issue can be solved by de-activating and re-enabling the gutter, which then positions the text correctly.
Please save MultiCharts logs right after the installation is finished (without starting MultiCharts go to Windows Start menu->Programs / All Programs->MultiCharts (folder)->Logs (right-click)->Properties->Open file location->Select all folders and files (except Cache folder) ->right-click on any of them ->Send to ->Compressed zip folder).What I've been seen is while installing MC and checking it to compile the studies, after installation, if I go to the PLE, select Compile All Uncompiled, there will be always a coupled of ones not compiled.
I always found this strange since they should all compile while installing MC but since sometimes I do the installation without compiling the studies so it runs a bit faster, it has not been a real issue.
Start PowerLanguage Editor and compile all uncompiled studies. In the Build tab highlight all text and save it into a text file. Send me (support@multicharts.com) the logs and the text file for analysis.
Re: MULTICHARTS 8.7 RELEASE
No reloading makes no difference.Is the difference corrected if you reload the chart in MultiCharts?
Unfortunately I have not found a way to view the trade price, bid and offer on the raw IQ data to check which application is correct.
I have attached an example from today
- Attachments
-
- mc_gomninja.png
- (63.6 KiB) Downloaded 10274 times
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Did you reload Volume profile chart or just a regular chart for this instrument?No reloading makes no difference.Is the difference corrected if you reload the chart in MultiCharts?
Unfortunately I have not found a way to view the trade price, bid and offer on the raw IQ data to check which application is correct.
I have attached an example from today
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Please submit a feature request to the Project Management of our web site so other users can vote for it: https://www.multicharts.com/pm/Very annoying scrollbar behavior in Order and Position Tracker:
Please change it.
- swz168
- Posts: 120
- Joined: 30 Sep 2010
- Location: Germany
- Has thanked: 47 times
- Been thanked: 32 times
Re: MULTICHARTS 8.7 RELEASE
Seems there is something wrong with PM. Steps 1 and 2 done, but "STEP 3 - describe the issue you are reporting" does not appear.Please submit a feature request to the Project Management of our web site so other users can vote for it: https://www.multicharts.com/pm/
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
We apologize for this inconvenience. We are doing our best to restore PM system as soon as possible.Seems there is something wrong with PM. Steps 1 and 2 done, but "STEP 3 - describe the issue you are reporting" does not appear.
Re: MULTICHARTS 8.7 RELEASE
I have found that if the data is reloaded the Delta/Bid/Ask values are corrected and move into line with other applications
As it stands the errors on the delta in real-time make this a significant issue for trading if using volume profile .
The problem seems to be most in evidence on Eurex and Liffe, the Bund, BTP and the Gilt in particular.
US markets and Ice seem much closer after reloading data.
I have attached an example for the Bund before and after data reload.
As it stands the errors on the delta in real-time make this a significant issue for trading if using volume profile .
The problem seems to be most in evidence on Eurex and Liffe, the Bund, BTP and the Gilt in particular.
US markets and Ice seem much closer after reloading data.
I have attached an example for the Bund before and after data reload.
No reloading makes no difference.Is the difference corrected if you reload the chart in MultiCharts?
Unfortunately I have not found a way to view the trade price, bid and offer on the raw IQ data to check which application is correct.
I have attached an example from today
- Attachments
-
- deltaerror.png
- (21.05 KiB) Downloaded 10212 times
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
This is the same issue as Arnie reported before:I have found that if the data is reloaded the Delta/Bid/Ask values are corrected and move into line with other applications
The fix will be implemented in the next version or build of MultiCharts.Is it me or something's wrong with cumulative delta?
up/down ticks is identical to ask/bid
After the version with the fix is installed - a reload of incorrect data will be required.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 8.7 RELEASE
I'm trying to export all my symbols and data so I can import them into another computer but I'm having this error over and over again.
What's the problem?
![Image](http://www.multicharts.com/discussion/download/file.php?id=6664)
What's the problem?
- Attachments
-
- export_data.png
- (14.12 KiB) Downloaded 11232 times
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
Make sure you have enough free space on the local drive where the Temp folder is located.I'm trying to export all my symbols and data so I can import them into another computer but I'm having this error over and over again.
What's the problem?
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
MultiCharts 8.7 Release New Builds 7570/7569
MultiCharts 8.7 Release builds 7570/7569 is a minor upgrade that includes the hot fixes for issues in MultiCharts 8.7 Release reported by our customers.
BUGS FIXED:
• There was an issue with LMAX broker profile when several profiles were connected simultaneously.
• PowerLanguage: When the name of an input was changed in a signal applied on a chart and then recompiled, the new name would not be showed up on the chart.
• Exception came up when trying to re-create a chart with MetaStock minute data.
• Volume Delta issue: the status provided by a data feed was thrown off in real time. More info here - viewtopic.php?f=1&t=28567#p83842
• PowerLanguage: The file that had been created by PRINT was blocked even if a study had a status OFF.
• DOM data was not shown for Korean futures KSU3 (root K200, exch KSE).
• There were no real-time updates on a chart (mostly related to InteractiveBrokers feed).
• No data on a chart with an expired future symbol using From_ To_ <today> data range.Cumulative Delta: the values were different when you copied and pasted a chart with OpenECry data.
• If OpenECry broker profile was connected Manage Broker Profile dialog became locked when one tries to open it.
• Incorrect Ask /Bid history volume on future symbols from InteractiveBrokers data feed.
• Fixed issues on manual trading with LMAX broker.
• Updated the calling of CreateFixOrder and ChangeOrderRate methods in FXCM plugin.
• CFD symbols from InteractiveBrokers were not ticking on a minute chart if it had been created before trading session hours.
MultiCharts 8.7 Release builds 7570/7569 is a minor upgrade that includes the hot fixes for issues in MultiCharts 8.7 Release reported by our customers.
BUGS FIXED:
• There was an issue with LMAX broker profile when several profiles were connected simultaneously.
• PowerLanguage: When the name of an input was changed in a signal applied on a chart and then recompiled, the new name would not be showed up on the chart.
• Exception came up when trying to re-create a chart with MetaStock minute data.
• Volume Delta issue: the status provided by a data feed was thrown off in real time. More info here - viewtopic.php?f=1&t=28567#p83842
• PowerLanguage: The file that had been created by PRINT was blocked even if a study had a status OFF.
• DOM data was not shown for Korean futures KSU3 (root K200, exch KSE).
• There were no real-time updates on a chart (mostly related to InteractiveBrokers feed).
• No data on a chart with an expired future symbol using From_ To_ <today> data range.Cumulative Delta: the values were different when you copied and pasted a chart with OpenECry data.
• If OpenECry broker profile was connected Manage Broker Profile dialog became locked when one tries to open it.
• Incorrect Ask /Bid history volume on future symbols from InteractiveBrokers data feed.
• Fixed issues on manual trading with LMAX broker.
• Updated the calling of CreateFixOrder and ChangeOrderRate methods in FXCM plugin.
• CFD symbols from InteractiveBrokers were not ticking on a minute chart if it had been created before trading session hours.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 8.7 RELEASE
Well, I have 22 GB of free disk space, I'm pretty sure this is more than enough since my database has only 2.2 GB of size.Make sure you have enough free space on the local drive where the Temp folder is located.
I need to export the data (from my 64bit MC version) since it's to be imported into a 32bit MC version.
If I choose to only export the symbols all goes well. The problem is only when I choose to export the data.
- ABC
- Posts: 721
- Joined: 16 Dec 2006
- Location: www.abctradinggroup.com
- Has thanked: 125 times
- Been thanked: 409 times
- Contact:
Re: MULTICHARTS 8.7 RELEASE
arnie,
I recall running into a similar problem about the time MC 64-bit was introduced. It was not connected to the harddisk in my case, but to an error in one symbol within the database.
Try to export the symbols in chunks and not all at once, this will show where it fails. I don't mean export one by one, but start with half of the database for example.
This would also overcome harddisk space issues, in case these would apply (the data is highly compressed within the database and will probably be decompressed during the export and then compressed again; so it might need a lot more than the 2.2 GB actual database size during the process).
Regards,
ABC
I recall running into a similar problem about the time MC 64-bit was introduced. It was not connected to the harddisk in my case, but to an error in one symbol within the database.
Try to export the symbols in chunks and not all at once, this will show where it fails. I don't mean export one by one, but start with half of the database for example.
This would also overcome harddisk space issues, in case these would apply (the data is highly compressed within the database and will probably be decompressed during the export and then compressed again; so it might need a lot more than the 2.2 GB actual database size during the process).
Regards,
ABC
Well, I have 22 GB of free disk space, I'm pretty sure this is more than enough since my database has only 2.2 GB of size.Make sure you have enough free space on the local drive where the Temp folder is located.
I need to export the data (from my 64bit MC version) since it's to be imported into a 32bit MC version.
If I choose to only export the symbols all goes well. The problem is only when I choose to export the data.
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 8.7 RELEASE
That was it.arnie,
I recall running into a similar problem about the time MC 64-bit was introduced. It was not connected to the harddisk in my case, but to an error in one symbol within the database.
Try to export the symbols in chunks and not all at once, this will show where it fails. I don't mean export one by one, but start with half of the database for example.
This would also overcome harddisk space issues, in case these would apply (the data is highly compressed within the database and will probably be decompressed during the export and then compressed again; so it might need a lot more than the 2.2 GB actual database size during the process).
Regards,
ABC
Export the symbols by chunks in fact did solve the issue.
All symbols now exported, no error was reported, so no symbol issue there.
Thanks ABC.
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
This release supports CQG API 4.05 and 5.00.104Any changes needed to the CQG api for this release?
- arnie
- Posts: 1594
- Joined: 11 Feb 2009
- Location: Portugal
- Has thanked: 481 times
- Been thanked: 514 times
Re: MULTICHARTS 8.7 RELEASE
Now when I close MC, if IB's TWS is already closed, the connection window pops up. It seems when MC is closing its processes call the IB connection.
Is this happening to you guys also?
Is this happening to you guys also?
- swz168
- Posts: 120
- Joined: 30 Sep 2010
- Location: Germany
- Has thanked: 47 times
- Been thanked: 32 times
Re: MULTICHARTS 8.7 RELEASE
Currently, the performance reports are strictly separated (Strategy Performance Report and Trading Performance Report).
Besides 100% automatic trading, I'm also semi automatic trading. So autotrading and manuel trading is interfering each other depending on market situations.
In semi autotrading, the reports are useless, due to the fact above. The reports are totally messed up. Please implement a performance report for semi autotrading.
Even if you are not semi autotrading, there are situations when you have to interfere (Closing positions). Then the report is getting useless.
I will add a PM entry as soon the site works again.
Out of curiosity, anyone semi autotrading here?
Besides 100% automatic trading, I'm also semi automatic trading. So autotrading and manuel trading is interfering each other depending on market situations.
In semi autotrading, the reports are useless, due to the fact above. The reports are totally messed up. Please implement a performance report for semi autotrading.
Even if you are not semi autotrading, there are situations when you have to interfere (Closing positions). Then the report is getting useless.
I will add a PM entry as soon the site works again.
Out of curiosity, anyone semi autotrading here?
Re: MULTICHARTS 8.7 RELEASE
Ever since I upgraded to build 7569 I have noticed daily charts take forever to load. I'm using IQfeed. I have now worked out that it is using tick data to build the daily bars as a bad tick is showing up which is only in the tick data not the daily data. "Build minute and daily bars based on tick data" is still unchecked.
- Henry MultiСharts
- Posts: 9165
- Joined: 25 Aug 2011
- Has thanked: 1264 times
- Been thanked: 2957 times
Re: MULTICHARTS 8.7 RELEASE
This issue has been resolved in MultiCharts 8.7 Release New Builds 7633/7634Ever since I upgraded to build 7569 I have noticed daily charts take forever to load. I'm using IQfeed. I have now worked out that it is using tick data to build the daily bars as a bad tick is showing up which is only in the tick data not the daily data. "Build minute and daily bars based on tick data" is still unchecked.