Search found 8905 matches

by Henry MultiСharts
14 Jan 2019
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 4
Replies: 20
Views: 562

Re: MULTICHARTS 12.0 RELEASE 4

wilkinsw, Gaempi, your inquiries are being analyzed.
by Henry MultiСharts
14 Jan 2019
Forum: MultiCharts .NET
Topic: Indicator Questions
Replies: 1
Views: 32

Re: Indicator Questions

Hello Emerald King,

1. Unfortunately there is no way to set that in the code.
2. Data window displays the values that are plotted on the chart. There is no way to feed the values to the data window only, bypassing the chart.
by Henry MultiСharts
14 Jan 2019
Forum: MultiCharts .NET
Topic: Visual Studio Edition
Replies: 1
Views: 38

Re: Visual Studio Edition

Emerald King wrote:If I use VS 2017 over VS 2013 will I run into any problems because of Multicharts?
Hello Emerald King,

You should not run into any issues as Visual Studio is being used only as the code editor, the compilation of the studies is done by PL NET Editor.
by Henry MultiСharts
14 Jan 2019
Forum: MultiCharts .NET
Topic: PowerLanguage .NET Editor problem
Replies: 2
Views: 38

Re: PowerLanguage .NET Editor problem

Hello Victor, All references and folders should be added through PowerLanguage .Net Editor only as there is only one direction of synchronization: from МultiСharts .Net editor to PlStudies* project. The changes done in VS for PlStudies* project would not be saved and would not show up in MC.Net edit...
by Henry MultiСharts
14 Jan 2019
Forum: MultiCharts .NET
Topic: Drop .NET 3.5 requirement
Replies: 1
Views: 35

Re: Drop .NET 3.5 requirement

Hello Bryan,

This is something that may happen in 1-2 years.
by Henry MultiСharts
14 Jan 2019
Forum: MultiCharts .NET
Topic: ToolBar to the Right of the Menu Bar
Replies: 1
Views: 32

Re: ToolBar to the Right of the Menu Bar

Hello Johannes,

The Menu toolbar needs to have the rightmost position in order to have the "Close", "Maximize" and "Minimize" buttons on the right.
by Henry MultiСharts
14 Jan 2019
Forum: MultiCharts .NET
Topic: Format resolution 6 months and 2 Quarters
Replies: 1
Views: 25

Re: Format resolution 6 months and 2 Quarters

Hello Patrick,

You need to set Data Range: From January 1st to achieve your goal.
by Henry MultiСharts
14 Jan 2019
Forum: MultiCharts .NET
Topic: Feature Request: A Set Amount of Visible Bars ( Regardless of Chart Size )
Replies: 3
Views: 64

Re: Feature Request: A Set Amount of Visible Bars ( Regardless of Chart Size )

Hello Johannes,

Thank you for your suggestion. You may want to submit a feature request to the Project Management of our web site so other users can vote for it: http://www.multicharts.com/pm/
by Henry MultiСharts
14 Jan 2019
Forum: MultiCharts .NET
Topic: 1 second bar chart not updating real time?
Replies: 1
Views: 38

Re: 1 second bar chart not updating real time?

Hello KJW,

Based on your screenshot - there is no realtime data permission for this symbol/exchange. Please contact IB directly to make sure you have the required data enabled for your account for the 3rd party apps access.
by Henry MultiСharts
14 Jan 2019
Forum: MultiCharts .NET
Topic: Automated Trading - Sync Price and Time
Replies: 1
Views: 49

Re: Automated Trading - Sync Price and Time

Hello Sriram, When auto trading is initially started/restarted in SA mode - the strategy position is flat (zero). If you have an open position at the broker and you want your strategy to continue managing this position - you need to feed this position to the strategy. When you are trading one instru...
by Henry MultiСharts
11 Jan 2019
Forum: MultiCharts
Topic: Subchart 1, 2 and 3 [SOLVED]
Replies: 2
Views: 43

Re: MULTICHARTS 12.0 RELEASE 4 [SOLVED]

I have a chart with three instrument, subchart 1, 2 and 3. Drawing TL on the suchart 2 and makes me the effect you see in the video why? fibdax, you need to right click on this subchart and go to Visual Order. There click on the instrument name and then click Send to Back. Now the drawing tools wil...
by Henry MultiСharts
11 Jan 2019
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 4
Replies: 20
Views: 562

Re: MULTICHARTS 12.0 RELEASE 4

automaton wrote:I got no update notifications for release 4. Checking for updates shows message “You have most current version”. I’m still running release 3.
automaton, this build will become available in the "Check for Updates" feature next week. You can manually download it from our website now.
by Henry MultiСharts
09 Jan 2019
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE 4
Replies: 4
Views: 119

Re: MULTICHARTS .NET 12.0 RELEASE 4

Starting with this version and using Portfolio Trader, I observed that Environment.IsAutoTradingMode occasionally reports false although I am in fact running in auto trading mode. Is anybody else experiencing the same thing? Or has anything changed around this property? dnickless, there were no cha...
by Henry MultiСharts
08 Jan 2019
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 4
Replies: 20
Views: 562

Re: MULTICHARTS 12.0 RELEASE 4

Tested the option "Format -> display entire series". It does not work in release 4, as my last post in release 3. i am not able to see 1 year of 5 minute data, i get an scrollbar. wegi, as specified in Release 3 thread - we are currently checking it. I will let you know as soon as there a...
by Henry MultiСharts
07 Jan 2019
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 4
Replies: 20
Views: 562

Re: MULTICHARTS 12.0 RELEASE 4

Tested the option "Format -> display entire series". It does not work in release 4, as my last post in release 3. i am not able to see 1 year of 5 minute data, i get an scrollbar. wegi, as specified in Release 3 thread - we are currently checking it. I will let you know as soon as there a...
by Henry MultiСharts
07 Jan 2019
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 4
Replies: 20
Views: 562

Re: Data Playback?

LRP wrote:Dear Support

At my site, Data Playback do not work anymore.
What happens?

Thank you very much and kind regards
LRP, data playback works on our end. Please provide more details regarding the specific issue you have, or come to the live chat to demonstrate it remotely.
by Henry MultiСharts
04 Jan 2019
Forum: MultiCharts
Topic: Wrong futures expiration date
Replies: 1
Views: 59

Re: Wrong futures expiration date

Hello Juraj,

You need to change the symbol name to NQU2014.
by Henry MultiСharts
04 Jan 2019
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE 4
Replies: 4
Views: 119

Re: MULTICHARTS .NET 12.0 RELEASE 4

wzero, thanks for reporting it. This issue has been confirmed and forwarded to our dev team for further analysis.
by Henry MultiСharts
28 Dec 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

Hi, i installed the latest MC12 Release 3 and now "display entire series" is not working as in version 11. Just setup a simple chart, 1 minute TF, latest 20 days. Do "format -> display entire series". MC11 show the whole series without an horizontal scrollbar at the bottom of th...
by Henry MultiСharts
28 Dec 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 4
Replies: 20
Views: 562

MULTICHARTS 12.0 RELEASE 4

MultiCharts 12.0 Release 4 builds 17488 (x32) / 17490 (x64) is out now!
You can check the change log in our blog.
Go to Download page

Make sure you do not miss our Winter Sale: Save up to $1300 right now!
by Henry MultiСharts
28 Dec 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE 4
Replies: 4
Views: 119

MULTICHARTS .NET 12.0 RELEASE 4

MultiCharts .NET 11.0 Release 4 builds 17493 (x32) / 17495 (x64) is out now!
You can check the change log in our blog.
Go to Download page

Make sure you do not miss our Winter Sale: Save up to $1300 right now!
by Henry MultiСharts
14 Dec 2018
Forum: MultiCharts
Topic: Profit Target Outliers [SOLVED]
Replies: 1
Views: 80

Re: Profit Target Outliers [SOLVED]

This behavior was related to an incorrect IOG configuration - for the strategy iceman is using that was required to use the option "Allow any exits from this strategy to occur multiple times per bar".
by Henry MultiСharts
14 Dec 2018
Forum: MultiCharts .NET
Topic: Download trades filled when MC is offline from IB server?
Replies: 3
Views: 74

Re: Download trades filled when MC is offline from IB server?

You can submit a feature request to the Project Management of our web site so other users can vote for it: http://www.multicharts.com/pm/
Please email to support to get an account for the PM system.
by Henry MultiСharts
12 Dec 2018
Forum: MultiCharts .NET
Topic: Download trades filled when MC is offline from IB server?
Replies: 3
Views: 74

Re: Download trades filled when MC is offline from IB server?

Hello istock888,

There is no way to do that in both cases.
by Henry MultiСharts
07 Dec 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

Hello, as soon as I have time, I send you the data of the machine where it gives me a memory error. I tried to install MC12 on a machine with more memory but it happens to me that the TPO charts are only monthly,quarter and year see video. I upgraded from MC 11 to MC 12 . I forgot I did not enter t...
by Henry MultiСharts
03 Dec 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

Hello. It appears that updating an instrument on a window/workspace actually modifies several instruments placed on different windows/workspaces. The windows may have been created originally by a copy and paste of a specific setup. Question: Is a copy-paste of a window in separate workspaces suppos...
by Henry MultiСharts
03 Dec 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

Hello, as soon as I have time, I send you the data of the machine where it gives me a memory error. I tried to install MC12 on a machine with more memory but it happens to me that the TPO charts are only monthly,quarter and year see video. I upgraded from MC 11 to MC 12 . I forgot I did not enter t...
by Henry MultiСharts
21 Nov 2018
Forum: MultiCharts
Topic: Stop loss strategy in chart trading
Replies: 2
Views: 135

Re: Stop loss strategy in chart trading

Hi,

it is the price of the instrument on the chart, not the money value.
by Henry MultiСharts
21 Nov 2018
Forum: MultiCharts
Topic: Screener / Watch list - 2 questions
Replies: 1
Views: 73

Re: Screener / Watch list - 2 questions

Hello Automeq, 1. OHLC columns are being populated with the realtime values from the data feed. It looks like you are using a historical data source that does not supply the realtime data. You can add an indicator that will plot the last historical OHLC values in the scanner. 2. You will need to pro...
by Henry MultiСharts
21 Nov 2018
Forum: MultiCharts .NET
Topic: Change instrument dropdown quantity
Replies: 1
Views: 53

Re: Change instrument dropdown quantity

Hello darob,

There is no option to do that. You may want to submit a feature request to the Project Management of our web site so other users can vote for it: http://www.multicharts.com/pm/
by Henry MultiСharts
20 Nov 2018
Forum: MultiCharts
Topic: TS Data not storing Data slow to load
Replies: 26
Views: 947

Re: TS Data not storing Data slow to load

Mark Brown wrote:MY DATA IS NOT BEING STORED - OR - MULTICHARTS IS NOT PULLING THAT DATA TO CHART.
Mark,

None of the other users experience anything similar. As previously mentioned - please come to our Live Chat for the remote support.
by Henry MultiСharts
15 Nov 2018
Forum: MultiCharts
Topic: Trade Bar problem - IB Accounts [SOLVED]
Replies: 3
Views: 138

Re: Trade Bar problem - IB Accounts [SOLVED]

Hello syswizard,

You need to configure IB data feed to be able to use the symbol lookup for it.
Please follow the IB Data feed connection guide:
http://www.multicharts.com/trading-soft ... ve_Brokers
Video tutorial:
https://www.multicharts.com/tutorials/
by Henry MultiСharts
15 Nov 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

fibdax wrote:hi, is this correct, will personal indicators be sent too?see gif
No studies (signals, indicators) will be sent over with the settings from your screenshot.
by Henry MultiСharts
14 Nov 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

Hello Fibdax, Are you getting a MultiCharts notification that the physical memory on your computer is running low? If that is the case - please close the other applications that are running on your PC and consuming the RAM. If you consider MultiCharts to be using unjustified amount of RAM, please sp...
by Henry MultiСharts
12 Nov 2018
Forum: MultiCharts
Topic: transparent colors needed
Replies: 5
Views: 203

Re: transparent colors needed

Hello Nuno,

Please describe the exact functionality you are looking for in more details.
by Henry MultiСharts
12 Nov 2018
Forum: MultiCharts
Topic: Importing instrument list from TS [SOLVED]
Replies: 2
Views: 135

Re: Importing instrument list from TS [SOLVED]

Hello Leo,

Symbol Lookup for TS does not provide ability for that.
If you have a list of instruments in txt format - you can import it into QuoteManager:
http://www.multicharts.com/trading-soft ... ymbol_List
by Henry MultiСharts
09 Nov 2018
Forum: MultiCharts
Topic: Customize a Data Window or Chart Hint
Replies: 2
Views: 99

Re: Customize a Data Window or Chart Hint

Hello syswizard,

Status Line is a realtime data stream, it is not available for Free Quotes since it is EOD historical data feed only.
You will need to use the prebuilt studies or program your own ones to calculate and display the required values on historical data.
by Henry MultiСharts
09 Nov 2018
Forum: MultiCharts
Topic: RT IQFeed S&P500 futures
Replies: 3
Views: 128

Re: RT IQFeed S&P500 futures

syswizard,

Chart and status line are separate data streams that are updating asynchronously.
If you have a lot of charts/drawings/running autotrading/optimization/playback at the same time - small update lag is possible.
by Henry MultiСharts
09 Nov 2018
Forum: MultiCharts
Topic: RT IQFeed S&P500 futures
Replies: 3
Views: 128

Re: RT IQFeed S&P500 futures

Hello syswizard, The values are matching on our end. You need to make sure you have non-delayed realtime data for your account. Status line shows the Total Volume for the current session. This means you need to plot a daily chart and check the current realtime bar. If there is no realtime bar then y...
by Henry MultiСharts
08 Nov 2018
Forum: MultiCharts .NET
Topic: How to synchronise the updates of tic in playback mode ? [SOLVED]
Replies: 2
Views: 135

Re: How to synchronise the updates of tic in playback mode ? [SOLVED]

Is there a way to make sure that MultiCharts update the calculus of one tick only when the calculus of previous tic is finish in playback mode ? Hello Emmanuel, That is already done by default. The calculation always finishes, it is not interrupted by a new tick. Is there a way to slow down the pla...
by Henry MultiСharts
06 Nov 2018
Forum: MultiCharts
Topic: Portfolio Trader close all trades
Replies: 5
Views: 316

Re: Portfolio Trader close all trades

Please contact us directly if you are interested in custom programming services.
by Henry MultiСharts
06 Nov 2018
Forum: MultiCharts
Topic: Bug report MC-2499 - MC/PT: wrong trade size with Cash Per Trade setting
Replies: 5
Views: 221

Re: Bug report MC-2499 - MC/PT: wrong trade size with Cash Per Trade setting

Henry, I knew there are probably "some well-reasoned calculations" even as I submitted the PM. Whatever they are, they just do not make sense. Or are not applicable. And order for 10K usd is an order for 10Kusd. Not more, not less. This can be easily programmed around, right? One "if...
by Henry MultiСharts
05 Nov 2018
Forum: MultiCharts QUIK
Topic: Блокирование торговли вручную или при достижении дневного лимита убытка
Replies: 2
Views: 61

Re: Блокирование торговли вручную или при достижении дневного лимита убытка

Здравствуйте, plyakhovsky. В MultiCharts нет подобного встроенного функционала. Программно именно блокировку трейдинга не реализовать, но можно сделать алерт, который будет отображаться при достижении определенного условия. https://www.multicharts.com/trading-software/index.php/Alert https://www.mul...
by Henry MultiСharts
05 Nov 2018
Forum: MultiCharts
Topic: Accumulating Stoplosses
Replies: 4
Views: 142

Re: Accumulating Stoplosses

Hello Leonel, Please update MultiCharts to the latest version (build 17002). If you still have the issue after that is done - please send us the logs so we can check it and specify the Broker Order ID in question (Order and Position Tracker window->Orders tab). Send us the logs via MultiCharts->Help...
by Henry MultiСharts
02 Nov 2018
Forum: MultiCharts
Topic: Pmms get strategy named num function
Replies: 1
Views: 105

Re: Pmms get strategy named num function

Hello multichartsUser23,

You need to use pmm_set_my_named_num to set the variable value that can be accessed by the PMMS.
by Henry MultiСharts
02 Nov 2018
Forum: MultiCharts .NET
Topic: c#, functions, multiple data series
Replies: 1
Views: 198

Re: c#, functions, multiple data series

Hello ecarlino, MultiCharts .Net is oriented to experienced programmers. In case you have any questions regarding C# coding we recommend referencing MSDN for information. Interfaces and classes available in MultiCharts .Net are described in MC .Net help file (PowerLanguage .Net Editor->Help tab-> Po...
by Henry MultiСharts
02 Nov 2018
Forum: MultiCharts
Topic: MultiCharts privacy, security and broker relationship? [SOLVED]
Replies: 30
Views: 1723

Re: MultiCharts privacy, security and broker relationship? [SOLVED]

Smoky wrote:and if MC12 loose DRM it still working in real time for 30 minutes ? right ? thanks for your time
That is correct.
by Henry MultiСharts
31 Oct 2018
Forum: MultiCharts
Topic: MultiCharts privacy, security and broker relationship? [SOLVED]
Replies: 30
Views: 1723

Re: MultiCharts privacy, security and broker relationship? [SOLVED]

Smoky wrote:thanks Henry for yours answers, can You give us how many time in 24 hours MC connect to yours servers ?
DRM check is done every minute.
by Henry MultiСharts
31 Oct 2018
Forum: MultiCharts
Topic: compile error:"line 0, column 0" [SOLVED]
Replies: 31
Views: 3576

Re: compile error:"line 0, column 0" [SOLVED]

I downgraded, upgraded again. Used different folders. At the moment it is working. But there is still something in the compiler log: C:\PROGRA~1\TSSUPP~1\MULTIC~1\make\MinGW64\bin\dlltool: Path components stripped from dllname, 'C:\PROGRA~3\TSSUPP~1\MULTIC~1\STUDYS~1\Studies\SrcCpp\INDICA~1\IA__RO~...
by Henry MultiСharts
31 Oct 2018
Forum: MultiCharts QUIK
Topic: Поломался отчет Trades Summary
Replies: 1
Views: 58

Re: Поломался отчет Trades Summary

Здравствуйте, plyakhovsky. Trades Summary генерируется на основе ордеров, которые хранятся в платформе (Order and Position Tracker->Orders). Ордера приходят от брокера только когда подключен соответствующий брокер профиль. Историю ордеров невозможно изменить. Можно только полностью ее очистить. Един...
by Henry MultiСharts
30 Oct 2018
Forum: MultiCharts
Topic: Broker capability for GAIN Capital block accounts? [SOLVED]
Replies: 1
Views: 103

Re: Broker capability for GAIN Capital block accounts? [SOLVED]

Hello Kel,

Block accounts functionality is not supported for the Gain connection on our end. At the moment adding it is not something that is in our to-do list.
by Henry MultiСharts
29 Oct 2018
Forum: MultiCharts .NET
Topic: Position closed alert not working [SOLVED]
Replies: 1
Views: 116

Re: Position closed alert not working [SOLVED]

Hello darob,

Make sure to enable the alerts for the signals in Format->Strategy Properties->Alerts tab:
http://www.multicharts.com/trading-soft ... egy_Alerts
by Henry MultiСharts
29 Oct 2018
Forum: MultiCharts .NET
Topic: Resetting a plot [SOLVED]
Replies: 3
Views: 186

Re: Resetting a plot [SOLVED]

Hello Tartalognion, When you are using the "Line" plot type - any two values will be connected with a line. This means that you need to use a different plot shape to have no plots on specific bars (where you call Reset for it). Unfortunately the data series properties like Colors, Style, e...
by Henry MultiСharts
26 Oct 2018
Forum: MultiCharts
Topic: TT Data Feed Connection / MC 12 R3 [SOLVED]
Replies: 3
Views: 138

Re: TT Data Feed Connection / MC 12 R3 [SOLVED]

The issue was related to the incorrect connection parameters on lantama's end.
by Henry MultiСharts
25 Oct 2018
Forum: MultiCharts .NET
Topic: Storing historical optimization reports
Replies: 4
Views: 148

Re: Storing historical optimization reports

Tartalognion,

I was actually referring to the manually saved reports. We will add an option for "a user specified location for the reports saved automatically" in the next major platform update.
by Henry MultiСharts
24 Oct 2018
Forum: MultiCharts
Topic: MultiCharts privacy, security and broker relationship? [SOLVED]
Replies: 30
Views: 1723

Re: MultiCharts privacy, security and broker relationtionshi [SOLVED]

for exemple yesterday MC12 start threads with LMAXhost and Bitconexhost names WHY ? only my broker profil is activate in quotemanager ! It can happen when you use a symbol listed under these data feeds, or try to add a new symbol for them, or if you call the QuoteManager->Tools->Data Sources window...
by Henry MultiСharts
24 Oct 2018
Forum: MultiCharts
Topic: Slower and slower genetic optmizations
Replies: 13
Views: 412

Re: Slower and slower genetic optmizations

shane1800, We were unable to replicate this behavior on our end. Please save the workspace with your optimization settings, close all other workspaces and send us the following information for analysis: Go to Help tab->Feedback (or Windows Start menu->All programs->MultiCharts64->Feedback). Select t...
by Henry MultiСharts
24 Oct 2018
Forum: MultiCharts
Topic: TT Data Feed Connection / MC 12 R3 [SOLVED]
Replies: 3
Views: 138

Re: TT Data Feed Connection / MC 12 R3 [SOLVED]

lantama, please email us directly regarding this matter.
by Henry MultiСharts
24 Oct 2018
Forum: MultiCharts
Topic: MultiCharts privacy, security and broker relationship? [SOLVED]
Replies: 30
Views: 1723

Re: MultiCharts privacy, security and broker relationship? [SOLVED]

1) In auto trading mode, everytime an order is generated, the broker is informed that MultiCharts was the software used to generate the order!!! WHY ?? I DON'T want my broker to know which trading software I use!! If the broker's API access agreement stipulates that it needs the source of the order...
by Henry MultiСharts
24 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

I've used the "Stop" and "Limit" icons all day today and the "Fade" icon is still at the top left corner, I haven't used it at all today, it's very annoying. How can I remove it from the top row? You need to use any icon from the 2nd row to have the icons rearranged. P...
by Henry MultiСharts
24 Oct 2018
Forum: MultiCharts .NET
Topic: Wrong basic arithmetic calculation on playback !
Replies: 3
Views: 160

Re: Wrong basic arithmetic calculation on playback !

radekj, I was referring to the "regular" indicator calculation when you apply it to the chart, when you are not using the data playback. We have now replicated this issue on our end. It will be fixed in the next platform update. In order to overcome it, you need to disable the "Skip t...
by Henry MultiСharts
23 Oct 2018
Forum: MultiCharts .NET
Topic: Wrong basic arithmetic calculation on playback !
Replies: 3
Views: 160

Re: Wrong basic arithmetic calculation on playback !

Hello radekj,

Does it happen in backtesting as well?
Please email us the workspace you are using.
by Henry MultiСharts
23 Oct 2018
Forum: MultiCharts
Topic: compile error:"line 0, column 0" [SOLVED]
Replies: 31
Views: 3576

Re: compile error:"line 0, column 0" [SOLVED]

Downgrading is not a solution. Please contact us via email or the live chat.
by Henry MultiСharts
22 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

So, just to be clear, are you saying that their one digit year symbol format will remain unchanged in QM/MC even if/when you update to their latest API ?? That is correct. Another, less crucial observation is that I only use a few options from the Chart Alanysis toolbar (Arrow Pointer, Cross Pointe...
by Henry MultiСharts
22 Oct 2018
Forum: MultiCharts
Topic: MC Order server for OEC Trader two digit date api update [SOLVED]
Replies: 1
Views: 89

Re: MC Order server for OEC Trader two digit date api update [SOLVED]

Hello Kel,

The changes are applicable to OEC Trader platform only. 3rd party apps are not affected and require no changes.
by Henry MultiСharts
22 Oct 2018
Forum: MultiCharts
Topic: compile error:"line 0, column 0" [SOLVED]
Replies: 31
Views: 3576

Re: compile error:"line 0, column 0" [SOLVED]

Hello, I had this error and chaneged a lot according to the 'tutorial' around this issue. Now the error log shows this: internal error in mingw32_gt_pch_use_address, at config/i386/host-mingw32.c:171: MapViewOfFileEx: Es wurde versucht, auf eine unzulässige Adresse zuzugreifen. The last part means:...
by Henry MultiСharts
22 Oct 2018
Forum: MultiCharts
Topic: Slower and slower genetic optmizations
Replies: 13
Views: 412

Re: Slower and slower genetic optmizations

Hello shane1800,

Are you able to replicate the same behavior using the prebuilt signals?
Is your own code using any external DLLs?
by Henry MultiСharts
22 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

Over the weekend, GAIN Capital changed their symbology to use two digit years. I notice that Gain Capital is no longer an option in the Data Source list under Tools\Symbol Dictionary in Quote Manager and there is a "No Security Definition has been found" message for any Gain Capital symbo...
by Henry MultiСharts
19 Oct 2018
Forum: MultiCharts
Topic: TS Data not storing Data slow to load
Replies: 26
Views: 947

Re: TS Data not storing Data slow to load

Mark, I’m afraid that your understanding of MultiCharts operation is incorrect. Let me clarify it for you: Once historical data is downloaded from the data feed server and plotted on the chart - it is stored in the cache. When you close MultiCharts, QuoteManager and Portfolio Trader - cached histori...
by Henry MultiСharts
19 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

MC Support: Is it possible to re-arrange the icons in Chart Trader ? (the icons below "Place Order") I noticed that in MC12 R3 you added the "Fade" icon and I'd like to move it out of my way. I use the "stop" and "Limit" icons almost exclusively. I need them ...
by Henry MultiСharts
19 Oct 2018
Forum: MultiCharts
Topic: Order errors on oanda
Replies: 9
Views: 257

Re: Order errors on oanda

Hello Erik, As Cypress has already specified above - OANDA has restricted API trade execution from 3rd party platforms for the European residents registered under OANDA Europe Limited to conform the MIFID 2 regulations. If you are with OANDA Europe then it is applicable to your account. You can use ...
by Henry MultiСharts
19 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

Hi is it possible to change some registry keys to be able to tighten the horizontal compression of the Chart on the time scale as it was possible to have with the previous versions? This limitation in the new MC 12 is not a good choice in my opinion and I've this need CrazyNasdaq, the minimum suppo...
by Henry MultiСharts
17 Oct 2018
Forum: MultiCharts
Topic: Multiple questions
Replies: 1
Views: 116

Re: Multiple questions

windows 7 64bit 1.) data is not being saved locally or data is reloading each and every time a chart is opened. yes save is checked! :evil: There's a separate topic about it. Please continue the discussion there. 2.) when you close multicharts all the processes keep running it will not close down u...
by Henry MultiСharts
17 Oct 2018
Forum: MultiCharts .NET
Topic: Version 12 reloads data every backtest [SOLVED]
Replies: 13
Views: 602

Re: Version 12 reloads data every backtest [SOLVED]

We have rolled back the fix that introduced this behavior and updated the installer file for version 12 Release 3 in our downloads section (same build number). One will need to uninstall his existing MultiCharts, download the updated installer and run it.
by Henry MultiСharts
17 Oct 2018
Forum: MultiCharts
Topic: TS Data not storing Data slow to load
Replies: 26
Views: 947

Re: TS Data not storing Data slow to load

Hello Mark, I believe there is some misunderstanding. There are no outstanding issues with saving/loading the data from storage. Nobody is locking any threads. Please specify the exact "closed threads with unresolved issues" you are referring to. If you experience an issue - please come to...
by Henry MultiСharts
17 Oct 2018
Forum: MultiCharts .NET
Topic: Storing historical optimization reports
Replies: 4
Views: 148

Re: Storing historical optimization reports

Hello Tartalognion,

You can specify any location you prefer for saving the report file.
by Henry MultiСharts
16 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

Thank you for fixing the Portfolio Trader Forward Performance Graph so that it shows a line now in Real-time Auto Trading. Is there a way to set the default scale of the graph to hourly or minutes instead of what looks like three days? rrams, not at the moment. This is something we are going to imp...
by Henry MultiСharts
15 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

Fast turnaround. Great job to you and MC team! Not sure if this recent fix is the culprit: Interactive Brokers connection improved to properly handle the “Order rejected – reason:Cannot modify the filled order” message. But my OCO orders to IB GLOBEX no longer get instantly triggered after my initi...
by Henry MultiСharts
10 Oct 2018
Forum: MultiCharts
Topic: demo data feed for MC
Replies: 4
Views: 164

Re: demo data feed for MC

etienne, please email to support to access the 32 bit installer.
by Henry MultiСharts
10 Oct 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE 3
Replies: 8
Views: 395

Re: MULTICHARTS .NET 12.0 RELEASE 3

Edit: the exit strategy is remaining associated with the security now, I don't know why it seemed to behave differently earlier. Sorry. Still would like to see an option to associate the strategy with the chart and I'll eventually file a feature request. Thanks. Hi Henry, exit strategies aren't bei...
by Henry MultiСharts
10 Oct 2018
Forum: MultiCharts .NET
Topic: Version 12 reloads data every backtest [SOLVED]
Replies: 13
Views: 602

Re: Version 12 reloads data every backtest [SOLVED]

It loads the data from the local database upon each backtest, currently there is no cache of this data. That's exactly the bug - introduced in MC12 and absent in MC11, and as such IMHO should not be just "fixed in some future release", with undefined ETA. That was the reason for this thre...
by Henry MultiСharts
10 Oct 2018
Forum: MultiCharts .NET
Topic: Version 12 reloads data every backtest [SOLVED]
Replies: 13
Views: 602

Re: Version 12 reloads data every backtest [SOLVED]

correct me if I am wrong, but when PT "Downloads missing historical data" on the FIRST backtest, there is no need for another download - there is no "missing" data. This initially collected data is in cache and used by all subsequent backtests. What's the bug that was corrected?...
by Henry MultiСharts
10 Oct 2018
Forum: MultiCharts
Topic: demo data feed for MC
Replies: 4
Views: 164

Re: demo data feed for MC

Hello etienne, You need to update MultiCharts to the latest version to be able to use the CQG connection: https://www.multicharts.com/download/ Supported security types for the other supported data providers can be found here:  http://www.multicharts.com/trading-software/index.php/Supported_security...
by Henry MultiСharts
09 Oct 2018
Forum: MultiCharts
Topic: Incorrect Backtests on Instruments with Negative Prices
Replies: 10
Views: 1913

Re: Incorrect Backtests on Instruments with Negative Prices

Hello Filippo,

That is not possible to use negative data values for backtesting in MultiCharts.
by Henry MultiСharts
09 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

RectangleSetColor. The documentation for the Rectangle* commands is coming soon. Basically they are similar to the existing drawing tools commands. I've tried it, but it changes only the border color and not the inner color of the rectangle. Which are the commands to change the inner color of the r...
by Henry MultiСharts
09 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

Re: MULTICHARTS 12.0 RELEASE 3

CrazyNasdaq wrote:Is there a way to change the color in a script with "RectangleNew" ?
As Setcolor or Set_Rectanglecolor ?
RectangleSetColor. The documentation for the Rectangle* commands is coming soon. Basically they are similar to the existing drawing tools commands.
by Henry MultiСharts
08 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 3
Replies: 47
Views: 2134

MULTICHARTS 12.0 RELEASE 3

MultiCharts 12.0 Release 3 build 17002 is out now!
You can check the change log in our blog.
Go to Download page
by Henry MultiСharts
08 Oct 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE 2
Replies: 4
Views: 324

Re: MULTICHARTS .NET 12.0 RELEASE 2

There's a couple of minor bugs that I have noticed in the most recent release. 1) Can't remove 'Trading Performance Report' button from the toolbar (when mc is restarted, it comes back). This issue will be fixed in one of the future updates. 2) Can't save a 'Chart Shift' on a TPO chart. When the wo...
by Henry MultiСharts
08 Oct 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE 3
Replies: 8
Views: 395

MULTICHARTS .NET 12.0 RELEASE 3

MultiCharts .NET 11.0 Release 3 build 17006 is out now!
You can check the change log in our blog.
Go to Download page
by Henry MultiСharts
05 Oct 2018
Forum: MultiCharts
Topic: The same error message shows again and again after I updated MultiCharts to V12.0. Could you help me to fix this error? [SOLVED]
Replies: 3
Views: 169

Re: The same error message shows again and again after I updated MultiCharts to V12.0. Could you help me to fix this err [SOLVED]

Hi,

The error happens in the 3rd party data feed that you are using.
The issue has been reported to your data provider.
We will add filters on our end to prevent the platform from crashing.
This improvement on our end can be expected in MultiCharts 12 Release 3.
by Henry MultiСharts
05 Oct 2018
Forum: MultiCharts
Topic: compile error:"line 0, column 0" [SOLVED]
Replies: 31
Views: 3576

Re: compile error:"line 0, column 0" [SOLVED]

Don't remember a single instance of compile error line 0, column 0 with MultiCharts 11 :) No so with MultiCharts 12 64-bit Release Version: 12.0.16868 :( unfortunately the "Compile error" issue seems to show up much much more often for me as well. At least one part of the issue, I've foun...
by Henry MultiСharts
04 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

Hi Henri,maybe i found something, with this setup, maybe MC close all position without stategy on chart...with IB client ID=0 MC have to make difference between outside orders (TWS) and orders made by MC stategy. Smoky, this option is applicable to the auto trading only. Please send us the logs as ...
by Henry MultiСharts
03 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

I found an issue, would like if someone else can confirm. When applying input combinations to a chart from the Strategy Optimization Report, the input values occupy the wrong inputs. Example I optimise inputs say: rsi , overbought, oversold and the highest net profit occurs at 14 , 70 , 30 respecti...
by Henry MultiСharts
03 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

ISSUE MC12 close existing order on your broker account when closing chart. VERY simple to reproduce. Open a chart and link it to your broker account, this chart don't have any strategy and you can see your order price and qty ok, all is good. Close the chart, and then MC12 send order to close your ...
by Henry MultiСharts
03 Oct 2018
Forum: MultiCharts
Topic: Oanda feed stuck
Replies: 10
Views: 492

Re: Oanda feed stuck

Hello gpw797, If you cannot see any error messages in the QuoteManager's Event Log - please come to the live chat to demonstrate this behavior remotely for the fastest assistance. If you cannot do so, then please send us the logs for analysis: In MultiCharts go to Help tab->Feedback (or Windows Star...
by Henry MultiСharts
02 Oct 2018
Forum: MultiCharts .NET
Topic: Version 12 reloads data every backtest [SOLVED]
Replies: 13
Views: 602

Re: Version 12 reloads data every backtest [SOLVED]

Zheka, As it has been already explained above - it is not a bug, it is a peculiarity of the current architecture. Before, Portfolio Trader was caching the data upon the first backtest. It did not “Download missing historical data” on the subsequent backtests, even though the option was enabled. Inst...
by Henry MultiСharts
02 Oct 2018
Forum: MultiCharts
Topic: Missing Chart Bars [SOLVED]
Replies: 14
Views: 474

Re: Missing Chart Bars [SOLVED]

McGeorge, please come to the Live Chat Monday - Friday 6.30 am - 1 pm ET to continue the analysis in your environment.
by Henry MultiСharts
02 Oct 2018
Forum: MultiCharts .NET
Topic: Passing values to external DLLs
Replies: 3
Views: 223

Re: Passing values to external DLLs

Hello michal,

Please have a look at the example attached to this post.
by Henry MultiСharts
02 Oct 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

Since yesterday i get the error message on the QM that the TWS is out of date. If have the latest TWS Build 973.2h, Sep 25, 2018 12:05:32 PM installed. SP, this issue will be fixed in MultiCharts 12 Release 3. You need to add 127.0.0.1 to Trusted IP Addresses or check the "Allow connections fr...
by Henry MultiСharts
28 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

hi Henry,As you can see now it's working, good.Please can you do the same thing for all other functions in grey ?Many thanks Smoky, you can find all prebuilt studies in the MultiCharts application folder (right click on the MC shortcut –> Properties –> "Shortcut" tab –> click "Open f...
by Henry MultiСharts
28 Sep 2018
Forum: MultiCharts
Topic: Bug report MC-2499 - MC/PT: wrong trade size with Cash Per Trade setting
Replies: 5
Views: 221

Re: Bug report MC-2499 - MC/PT: wrong trade size with Cash Per Trade setting

Zheka, Based on the information you have provided you are using IB as the data source and Default (MCFX Private) as the Currency Conversion source. Please find attached calculations for order #5 and order #9 below: Example 1 Trade #1 (Order #5) on 8/1/2018 from your screenshot in PM entry: Cash per ...
by Henry MultiСharts
27 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

Hi Henry, sorry it's compilation error here you will find simple code to try getpositionopenpl.pla my error when compile Smoky, you don't have the prebuild GetPositionOpenPL function in your editor anymore. This is clearly stated in the errors and you can see that the function name is grayed out in...
by Henry MultiСharts
27 Sep 2018
Forum: MultiCharts
Topic: Memory Monitor MADNESS STOP IT!
Replies: 4
Views: 253

Re: Memory Monitor MADNESS STOP IT!

Mark Brown, The new warning message about reaching the GDI and User objects limits was added in MultiCharts 12 Release 2. The popup appears on your Main screen (OS settings), disregard MultiCharts main window position. As wilkinsw mentioned above: My understanding is that it was added to prevent an ...
by Henry MultiСharts
27 Sep 2018
Forum: MultiCharts QUIK
Topic: Номер расчета при "Optimize signal" для MC.NET
Replies: 4
Views: 142

Re: Номер расчета при "Optimize signal" для MC.NET

zysmn,

Чтобы счетчик заработал в многопоточной среде надо сделать один класс - синглтон, в котором и вести этот счетчик, а также добавить в нём критическую секцию. Счетчик необходимо увеличивать на первом баре серии. Больше про синглтоны: http://csharpindepth.com/Articles/Gener ... leton.aspx
by Henry MultiСharts
27 Sep 2018
Forum: MultiCharts
Topic: Missing bars on few charts after network problem
Replies: 3
Views: 131

Re: Missing bars on few charts after network problem

Martin,

Reloading should re-request all bars within the chart's specified data range. Please let me know in case this behavior reappears on your end.
by Henry MultiСharts
27 Sep 2018
Forum: MultiCharts
Topic: optimize by metrics?
Replies: 5
Views: 202

Re: optimize by metrics?

Hello joebone, I'm afraid that this is not something that can be done within the Custom Fitness Function. But you can create your own code with SetCustomFitnessValue to perform optimization based on Sortino ratio, similar way we have done it for Sharpe ratio: http://www.multicharts.com/discussion/vi...
by Henry MultiСharts
27 Sep 2018
Forum: MultiCharts
Topic: Documentation for creating new bar types
Replies: 2
Views: 118

Re: Documentation for creating new bar types

Hello Alex,

The source code of the prebuilt plugins comes with the platform as templates that can be used for reference. You can learn more in the Wiki section:
https://www.multicharts.com/trading-sof ... esolutions
by Henry MultiСharts
27 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

all functions "Accounts and Positions" seem to be buggy. I try : Profit= GetPositionOpenPL(ContractName,AccountName); NbShares= GetPositionQuantity(ContractName,AccountName); Equity= GetRTAccountEquity(AccountName); Equity= GetRTAccountEquity("A340747"); all return error code ma...
by Henry MultiСharts
26 Sep 2018
Forum: MultiCharts
Topic: New functions, please advise. [SOLVED]
Replies: 9
Views: 257

Re: New functions, please advise. [SOLVED]

Exactly as ABC stated above: In MultiCharts 9.0 Release 4 we've added copies of GlobalVariable functions that are utilized by the prebuilt addons. This is something that was reported by ABC here: http://www.multicharts.com/discussion/v ... 859#p82770
by Henry MultiСharts
26 Sep 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE 2
Replies: 4
Views: 324

Re: MULTICHARTS .NET 12.0 RELEASE 2

There's a couple of minor bugs that I have noticed in the most recent release. 1) Can't remove 'Trading Performance Report' button from the toolbar (when mc is restarted, it comes back). 2) Can't save a 'Chart Shift' on a TPO chart. When the workspace is reopened, Chart Shift is always zero. Hello ...
by Henry MultiСharts
26 Sep 2018
Forum: MultiCharts .NET
Topic: ADX based on data X within code.
Replies: 8
Views: 302

Re: ADX based on data X within code.

eunos64, Changing the base series number via the study Inputs is not supported. After changing the input the study is not recreated, i.e. the Create() method is not called and the functions are not applied to the new context. The study should be programmed to work with the required data series from ...
by Henry MultiСharts
21 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

I found two issues with new Kase Bar implementation. First, when building Kase Bars from minute data the realtime calculation will differ from bars that are build from historical data. Please have a look at the two charts, both have the same settings and data source, the right chart is calculated i...
by Henry MultiСharts
21 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

mickatrade wrote:That s good news.
Do you have an ETA?
Thx
MJ
mickatrade, based on our analysis, FXCM's REST API is not stable yet. We will get back to adding support for it when the known issues of this API are ironed out. We do not have any information when it is going to be fixed by FXCM.
by Henry MultiСharts
21 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

karlrb wrote:Only me got the problem about the performance graph of portfolio trade is not showing correct data. I have tried to reproduce the issue on a fresh install computer. version: 12.0.16868.400.
karlrb, thanks for reporting. We are currently analyzing this behavior.
by Henry MultiСharts
21 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

I found an issue, would like if someone else can confirm. When applying input combinations to a chart from the Strategy Optimization Report, the input values occupy the wrong inputs. Example I optimise inputs say: rsi , overbought, oversold and the highest net profit occurs at 14 , 70 , 30 respecti...
by Henry MultiСharts
21 Sep 2018
Forum: MultiCharts
Topic: Missing Chart Bars [SOLVED]
Replies: 14
Views: 474

Re: Missing Chart Bars [SOLVED]

Hello McGeorge,

That is not an issue. Having multiple "Session Ends" within the same day is not supported.
You will need to change that and use the "Every X Bar" option for Volume Profile.
by Henry MultiСharts
21 Sep 2018
Forum: MultiCharts .NET
Topic: Accessing text on screen
Replies: 3
Views: 228

Re: Accessing text on screen

Hello Al3cs,

Unfortunately there is no way to access a specific text element and draw the border for it.
by Henry MultiСharts
20 Sep 2018
Forum: MultiCharts .NET
Topic: ADX based on data X within code.
Replies: 8
Views: 302

Re: ADX based on data X within code.

eunos64, A study applied to the base series is always calculated based on the bars of this series. If in the script there are functions that are calculated in the context of the other series - they are called upon each calculation of the script, but their values are fixated on the other specified se...
by Henry MultiСharts
20 Sep 2018
Forum: MultiCharts
Topic: Missing bars on few charts after network problem
Replies: 3
Views: 131

Re: Missing bars on few charts after network problem

Hello Martin,

Which data provider do you use?
What is the resolution of your charts?
by Henry MultiСharts
20 Sep 2018
Forum: MultiCharts .NET
Topic: Compilation or debugging?
Replies: 3
Views: 215

Re: Compilation or debugging?

The corresponding file is created in both cases. The difference is in the debugging information and code optimization.
Debug configuration is required for development and debugging of the studies. Release configuration is required for the final assembly.
by Henry MultiСharts
19 Sep 2018
Forum: MultiCharts .NET
Topic: Compilation or debugging?
Replies: 3
Views: 215

Re: Compilation or debugging?

Hello Tartalognion,

1. You can always change the source code. You need to recompile the study after any modifications were done.
2. You need to rebuild when there were many changes in the project.
by Henry MultiСharts
19 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

mickatrade wrote:Hello,
I'd like to know if you'll add fxcm broker and datafeed in the next months .
The new API is available.
https://www.fxcm.com/uk/algorithmic-tra ... i-trading/
Thx,
MJ
mickatrade, this is something we are going to add in one of the future versions.
by Henry MultiСharts
19 Sep 2018
Forum: MultiCharts
Topic: MAJOR MC12 optimize order flow bug! [SOLVED]
Replies: 2
Views: 305

Re: MAJOR MC12 optimize order flow bug! [SOLVED]

This issue has been resolved in MultiCharts12 Release 2.
by Henry MultiСharts
18 Sep 2018
Forum: MultiCharts
Topic: Continuous contracts in IB yet? [SOLVED]
Replies: 14
Views: 895

Re: Continuous contracts in IB yet? [SOLVED]

joebone wrote:im not even seeing the @ES contract in quote manager when i pull it up while using Gateway
joebone, please update your Gateway and MultiCharts to the latest versions.
by Henry MultiСharts
18 Sep 2018
Forum: MultiCharts
Topic: Problem with printing form the PL Editor [SOLVED]
Replies: 3
Views: 1199

Re: Problem with printing form the PL Editor [SOLVED]

This issue has been resolved in MultiCharts 12 Release 2:
Fixed the issue with the Print and Print Preview features in the PowerLanguage Editor window reported here: viewtopic.php?f=1&t=51565&p=130334#p130331
by Henry MultiСharts
18 Sep 2018
Forum: MultiCharts
Topic: Portfolio allocation in %
Replies: 1
Views: 131

Re: Portfolio allocation in %

Hello Waldem, We require more information. Could you please shorten the amount of symbols in your portfolio (it would make the analysis go much faster and easier)? It would be ideal if you could leave just one symbol. Please send us your test workspace, also send us QMD files with the daily data (it...
by Henry MultiСharts
18 Sep 2018
Forum: MultiCharts
Topic: Order rejected TWS API connection broken [SOLVED]
Replies: 7
Views: 273

Re: Order rejected TWS API connection broken [SOLVED]

Leo, that's the exact issue we have resolved in MultiCharts 12 Release 2.
by Henry MultiСharts
18 Sep 2018
Forum: MultiCharts
Topic: Inconsistent equity curve chart and total trade number [SOLVED]
Replies: 1
Views: 106

Re: Inconsistent equity curve chart and total trade number [SOLVED]

Hello regtracer,

That is expected behavior. All trades that are closed on the same bar are combined into a single one on the equity curve graph.
by Henry MultiСharts
18 Sep 2018
Forum: MultiCharts .NET
Topic: MIFID Regulations and European Customers
Replies: 1
Views: 226

Re: MIFID Regulations and European Customers

Hello ascales, We had it discussed with OANDA only. None of the other brokers have informed us about accepting these MIFID II regulations. You can use OANDA for charting, but not for order execution. You can configure the symbol mapping from OANDA data to any of the supported brokers: https://www.mu...
by Henry MultiСharts
18 Sep 2018
Forum: MultiCharts .NET
Topic: Compatible broker that allows CFD or Spreadbetting at small size?
Replies: 1
Views: 195

Re: Compatible broker that allows CFD or Spreadbetting at small size?

Ava Trade - wrong account type error, must use AvaTrader software according to MC wiki but this is not an option on the Ava Trade website Hello Mathew, To use AvaTrade account in MultiCharts it is necessary to have this account working in AvaTrader application. An account created for MT application...
by Henry MultiСharts
17 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

I created small system that reproduce the issue. I will send to you run in your computer. I use instrument PETR4.SA from free Quotes. Create a chart on (Build 16374) and include this study after make same procedure using (Build 16868) I very interresting situation if a use MSFT instruments from sam...
by Henry MultiСharts
17 Sep 2018
Forum: MultiCharts
Topic: SetStopLoss function and currency
Replies: 1
Views: 145

Re: SetStopLoss function and currency

Hello Parker, By default the inputs for the special orders (such as SetStopLoss, SetProfitTarget, etc.) are treated in the Base Currency selected in Format->Strategy Properties->Properties. If you want them to be treated in the currency of the symbol you need to use MultiCharts 9.1 or above and chan...
by Henry MultiСharts
17 Sep 2018
Forum: MultiCharts
Topic: Order rejected TWS API connection broken [SOLVED]
Replies: 7
Views: 273

Re: Order rejected TWS API connection broken [SOLVED]

This is something we have improved in MultiCharts 12 Release 2:
Interactive Brokers: solved false error “MultiCharts generated the order, but was not able to send it because TWS API returned that the connection was broken” that may appear while the connection was ok.
by Henry MultiСharts
17 Sep 2018
Forum: MultiCharts .NET
Topic: ADX based on data X within code.
Replies: 8
Views: 302

Re: ADX based on data X within code.

Hello eunos64,

Please refer to the following sample:
viewtopic.php?f=19&t=45848#p100792
by Henry MultiСharts
17 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

On 2016, I don't get that far as nothing happens when I try to open the exe. I tried downloading it again - but it made no difference Please make sure your anti virus and firewall are disabled, close any applications running in the background, try changing the Path to the system Temp folder like de...
by Henry MultiСharts
17 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

I can't find the “Request Historical ticks directly from API” option in the IB data feed settings in Quote Manager. Product Version is 12.0.16868.400. Am I missing something? seneca, we have reworked the Historical Data controls in the Interactive Brokers data feed settings since some of the users ...
by Henry MultiСharts
17 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

If the codes run in other release I dont think this is a code problem .I think could be a new bug. Part of code : if time=1700 and (Today_Julian =Data_Idx_Julian- Alert_Antecendencia) then begin Arw_SetColor(Arw_New (JulianToDate (Data_Idx_Julian),1700,L*0.98, false),AtenColor); if Text_Arrow_ON=1 ...
by Henry MultiСharts
17 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

Meecc wrote:Flush "Cached" Data Typo
Meecc, thanks for pointing that out. We will have it corrected.
by Henry MultiСharts
17 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

Re: MULTICHARTS 12.0 RELEASE 2

Post by automaton » 11 Aug 2018 "Henry. The above usability improvement worked smoothly in regards to utilizing CTRL+S and CTRL+P keyboard shortcuts, but it seems to have inadvertently created a new issue that didn't exist in the previous versions. Some sort of key lock on this little GUI box ...
by Henry MultiСharts
14 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE 2
Replies: 51
Views: 2133

MULTICHARTS 12.0 RELEASE 2

MultiCharts 12.0 Release 2 build 16868 is out now!
You can check the change log in our blog.
Go to download page
by Henry MultiСharts
14 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Can someone tell me why MC12 represents such a dramatic overhaul of Multicharts? It just seems like so many things are wrong with it, yet I don't know why there was the pressure to make so many changes in the first place. I was fine with MC9 and 10...even 11. Sure there were some bugs that needed f...
by Henry MultiСharts
14 Sep 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE 2
Replies: 4
Views: 324

MULTICHARTS .NET 12.0 RELEASE 2

MultiCharts .NET 11.0 Release 2 build 16872 is out now!
You can check the change log in our blog.
Go to download page
by Henry MultiСharts
14 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Sorry Henry, i can't reproduce all bugs with a simple test.pla make for Your dev team. But i worked one month to find issues and make my analysis, Hope this file can help your team to find fix issues. Any comment are welcome. Hello Smoky, Unfortunately the information we have so far is insufficient...
by Henry MultiСharts
14 Sep 2018
Forum: MultiCharts
Topic: Lmax and contract number [SOLVED]
Replies: 7
Views: 233

Re: Lmax and contract number [SOLVED]

Hello Mattia, When trading Forex with LMAX 1 contract in MultiCharts = 1000 contracts on LMAX side. For the auto trading the order size is configured in Format->Strategy Properties->Properties tab-> Trade size. if the order size is specified in your code - it overwrites the values under the Properti...
by Henry MultiСharts
13 Sep 2018
Forum: MultiCharts
Topic: Re: MULTICHARTS 12.0 RELEASE - continuous futures
Replies: 1
Views: 132

Re: Re: MULTICHARTS 12.0 RELEASE - continuous futures

Hello jl12,

If the required symbol root is not present in the symbol dictionary for your data feed, then you need to add it manually:
https://www.multicharts.com/trading-sof ... Dictionary
by Henry MultiСharts
11 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

version 12 bug - charting - format objects - status - disable - the panel subchart will stay in place - even though the study is disabled. in other words on a chart when viewing a rsi when you disable it's status there is a big blank space still there. you have to delete the rsi to get the chart to...
by Henry MultiСharts
11 Sep 2018
Forum: MultiCharts
Topic: Symbol DUG price action for the 7th shows as the 6th, please view pic file [SOLVED]
Replies: 1
Views: 108

Re: Symbol DUG price action for the 7th shows as the 6th, please view pic file [SOLVED]

Hello quantum777,

The realtime Renko bar has the timestamp of the last closed bar. It will change to the proper date/timestamp when the bar closes.
by Henry MultiСharts
11 Sep 2018
Forum: MultiCharts QUIK
Topic: Номер расчета при "Optimize signal" для MC.NET
Replies: 4
Views: 142

Re: Номер расчета при "Optimize signal" для MC.NET

Здравствуйте, zysmn. На данный момент подобного функционала нет. Вы можете создать globalvariable и инкрементировать её значение: value1 = GVGetNamedInt("OptCount", -1); if getappinfo(aioptimizing)=0 then GVSetNamedInt("OptCount", -1); if getappinfo(aioptimizing)=1 and value1<0 t...
by Henry MultiСharts
10 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

version 12 bug - charting - format objects - status - disable - the panel subchart will stay in place - even though the study is disabled. in other words on a chart when viewing a rsi when you disable it's status there is a big blank space still there. you have to delete the rsi to get the chart to...
by Henry MultiСharts
07 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

wilkinsw, will you do me a favor and check the speed of optimization - it seems UNBELIEVABLY slow as version 11 was. even ts is far faster at 32 bit. MC64,10, MC64,11 and MC64,12 looks the same to me when testing brute force optimisation. Let's call them the "ref rate". MC32,9 was about 6...
by Henry MultiСharts
06 Sep 2018
Forum: MultiCharts .NET
Topic: returning multiple values from c# function
Replies: 4
Views: 390

Re: returning multiple values from c# function

Chartsurfer wrote:are there any plans to upgrade MC.NET to a later version of .NET framework?
Peter, this is not something that we have in our to-do list at the moment. You can return multiple values from c# function by reference.
by Henry MultiСharts
06 Sep 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

I've never used it before, but today I try it for some kind of studies and.....Why we can't have a Volume profile Monthly ? CrazyNasdaq, we are not planning on implementing this feature for the following reason: Volume Profile is built out of tick data. Monthly Volume Profiles would load for a long...
by Henry MultiСharts
06 Sep 2018
Forum: MultiCharts
Topic: Missing Chart Bars [SOLVED]
Replies: 14
Views: 474

Re: Missing Chart Bars [SOLVED]

Hello McGeorge,

Please check "Session End" only once at the end of your trading sessions, rather than several times throughout the day. It should fix your issue.
by Henry MultiСharts
05 Sep 2018
Forum: MultiCharts .NET
Topic: Build failed but no error in the Errors Log tab...
Replies: 2
Views: 156

Re: Build failed but no error in the Errors Log tab...

Hello Tartalognion,

We were unable to replicate this behavior on our end. The error message was shown ok for this kind of code.
Please provide the complete code that does not produce this error.
by Henry MultiСharts
05 Sep 2018
Forum: MultiCharts
Topic: Portfolio Trader close all trades
Replies: 5
Views: 316

Re: Portfolio Trader close all trades

Hello tradingest,

Please describe the specific difficulty you have.
by Henry MultiСharts
04 Sep 2018
Forum: MultiCharts
Topic: Session template "Default" not found! [SOLVED]
Replies: 4
Views: 201

Re: Session template "Default" not found! [SOLVED]

Hello Ilag,

Please send us your QMD symbol export and your portfolio workspace to support.
Additionally could you check and see what session templates is being used by these symbols in both QuoteManager and Portfolio?
by Henry MultiСharts
31 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

slow optimization - anyone experiencing it? the new optimization seems UNBELIEVABLY slow as compared to version 11. i been optimizing for 30 years so i know about all the ways to overload a run and didn't. i know what slow is - it's across the board slow even with just price patterns even the simpl...
by Henry MultiСharts
31 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Mark Brown wrote:
Chartsurfer wrote:Rolling back to MC11R9 the Chart Trading settings are safed again ...


How do you roll back to 11? just reinstall it again?
You need to uninstall the current version and run the installer file of the version you need.
by Henry MultiСharts
31 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Printing problem, has anyone tried to print from the Power Language Editor? It throws up a Encountered an improper argument box. Charting will print btw no problem. No matter what printer I use it fails to print. Yes other applications can print, yes my printers are turned on and have paper. Mark, ...
by Henry MultiСharts
31 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Henry, I noticed one minor annoyance with MC12 and the settings for Chart Trading. In MC11R9 and the versions before I was used to have all Chart Trading settings (trade panel full mode on/off, auto attached exit strategy, account connection red/green button) stored by MC. In short, when I turned o...
by Henry MultiСharts
31 Aug 2018
Forum: MultiCharts
Topic: Oanda feed stuck
Replies: 10
Views: 492

Re: Oanda feed stuck

gpw797, this issue will be fixed in the next platform update (MultiCharts 12 Release 2).
by Henry MultiСharts
30 Aug 2018
Forum: MultiCharts .NET
Topic: Code Organisation and Unit Testing
Replies: 2
Views: 199

Re: Code Organisation and Unit Testing

Hello Mathew,

For working with studies/solution/references, please see post #1 in MultiCharts .NET FAQ:
viewtopic.php?f=19&t=45848#p100789
by Henry MultiСharts
30 Aug 2018
Forum: MultiCharts .NET
Topic: Function to write to a text file [SOLVED]
Replies: 2
Views: 278

Re: Function to write to a text file [SOLVED]

Hello Tartalognion,

Since you are using a Simple function, you need to call it in your code each time you need to have it calculated. The methods are called sequentially in the order of creating the study objects, not all at the same time.
by Henry MultiСharts
29 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

arnie wrote:It seems TPO increment is off
arnie, this was done by design, but we may consider changing it in the future if it does no fit the majority of the users.
by Henry MultiСharts
28 Aug 2018
Forum: MultiCharts
Topic: Copy and past effect on data in scanner window. [SOLVED]
Replies: 2
Views: 157

Re: Copy and past effect on data in scanner window. [SOLVED]

After further investigation I have found that the instruments showing no data have somehow changed data providers from freequotes to ascii mapping. Changing them back makes them all work again. Is there any way to change the effected instruments in the scanner window as a group? It appears they mus...
by Henry MultiСharts
27 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Zheka wrote:To add: with "Request Historical ticks directly from API", MC gets Bid prices=Ask.
We will check it.
by Henry MultiСharts
27 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Hello Henry I have followed all the procedures referred to but still get the Compile error line 0 column 0 John Henry I tried this simple statement in an indicator to test the function and it came back with compile error line 0 column 0; value99=TPO_levels_Value(162.24,1); print(d,time_s,value99); ...
by Henry MultiСharts
27 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

SP wrote:Henry, could "Flush Cashed Data to Database" be also integrated under File->..... into the main program, so you don't always have to open the Quotemanager?
SP, we'll have it added in the next update.
by Henry MultiСharts
24 Aug 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE
Replies: 10
Views: 1245

Re: MULTICHARTS .NET 12.0 RELEASE

Press Ctrl-B (Flush Cached Data to Database) would raise an Application Error if any symbol was edited in QuoteManage (For example Custom Futures rollover condition is modified) wzero, thanks for reporting. We will have that fixed in the next update. To avoid this issue - do not press Ctrl-B when &...
by Henry MultiСharts
23 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

1) IB CFD historical data would not load, motivating that "Data are not subscribed" and that it would start getting Delayed data after the delay period. - I do have all the IB permissions for CFDs - that was not a problem with MC11 CFDs from IB are working the following way: Stock CFD – h...
by Henry MultiСharts
23 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

understand this - my multicharts 11 was working - my TS was working - when upgrading to multicharts 12 - multicharts tried to upgrade .net and FAILED - now i have no multicharts and i have no TS. MultiCharts application installation does not start until the required framework is installed. This mea...
by Henry MultiСharts
23 Aug 2018
Forum: MultiCharts
Topic: ESignal data feed and connect to IB [SOLVED]
Replies: 2
Views: 152

Re: ESignal data feed and connect to IB [SOLVED]

The issue was in an incorrect symbol for the realtime data access.
by Henry MultiСharts
23 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

the worst problems upgrading to 12 i have been down for two days now costing me money. because windows 7 ultimate 64 bit will not load the .net 4.xx environment. what was wrong with .net 3.5 ? how can a trader depend on this program when bad changes like this are made? i have contacted support and ...
by Henry MultiСharts
22 Aug 2018
Forum: MultiCharts
Topic: Ascii mapping multiple .csv files to one symbol
Replies: 1
Views: 123

Re: Ascii mapping multiple .csv files to one symbol

Hello Splint,

There is no way to map multiple files into a single symbol. One file = one ASCII Mapping symbol. (one resolution, one quote field).
You will need to form a single .csv file to map it, or import the data from all files into a single symbol (one by one).
by Henry MultiСharts
21 Aug 2018
Forum: MultiCharts .NET
Topic: [UPDATED 08/23/18] Attention CQG users
Replies: 1
Views: 905

Re: [UPDATED] Attention CQG users

MultiCharts 11 users can install the updater corresponding to their version of MultiCharts to stay on the current version and continue receiving the data from CQG.
by Henry MultiСharts
21 Aug 2018
Forum: MultiCharts
Topic: Continuous contracts in IB yet? [SOLVED]
Replies: 14
Views: 895

Re: Continuous contracts in IB yet? [SOLVED]

You can add the symbol and see charts but you can't trade the continuous symbol in MC (unless this has changed just recently.. not at my trading desk). Trading the continuous symbol is not supported by IB. As specified above - IB continuous instrument should be mapped to the current front month con...
by Henry MultiСharts
21 Aug 2018
Forum: MultiCharts
Topic: Continuous contracts in IB yet? [SOLVED]
Replies: 14
Views: 895

Re: Continuous contracts in IB yet? [SOLVED]

Automeq wrote:Interactive brokers has a continuous for several futures contracts.

Speaking specifically about ES contract, is this the @ES in Multicharts ?
That is correct. You need to run TWS version 966 or a newer one to access IB's continuous futures. Make sure you add the symbol using Symbol Lookup.
by Henry MultiСharts
21 Aug 2018
Forum: MultiCharts
Topic: Continuous contracts in IB yet? [SOLVED]
Replies: 14
Views: 895

Re: Continuous contracts in IB yet? [SOLVED]

IB supports the continuous contract now.. it is symbols @CL, @ES, @RTY for example. I can trade all of them in TWS but get errors in MC. IB continuous instrument should be mapped to the current front month contract manually to place orders: http://www.multicharts.com/trading-software/index.php/Symb...
by Henry MultiСharts
16 Aug 2018
Forum: MultiCharts
Topic: Oanda feed stuck
Replies: 10
Views: 492

Re: Oanda feed stuck

gpw797, please upload the logs as requested above.
by Henry MultiСharts
16 Aug 2018
Forum: MultiCharts
Topic: DDE and RTD how use both inside MC
Replies: 3
Views: 243

Re: DDE and RTD how use both inside MC

Universal DDE is realtime data only. You will need to import historical data from a different source, or merge a historical data provider with the realtime data coming from DDE.
by Henry MultiСharts
16 Aug 2018
Forum: MultiCharts
Topic: DDE and RTD how use both inside MC
Replies: 3
Views: 243

Re: DDE and RTD how use both inside MC

Hello strelow,

You can't use RTD input directly in MultiCharts.
If you can feed the data into Excel from your source, then you can get the data from Excel into MultiCharts using Universal DDE:
https://www.multicharts.com/trading-sof ... _for_Excel
by Henry MultiСharts
16 Aug 2018
Forum: MultiCharts
Topic: Oanda feed stuck
Replies: 10
Views: 492

Re: Oanda feed stuck

Hello gpw797, In MultiCharts data provider and broker connections are separate. You can see the status of the broker connection on the Trade Bar in MultiCharts. Reconnecting the broker profile on the Trade Bar has no effect on the data feed connection. As for the data connection - you can trace the ...
by Henry MultiСharts
16 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

For the most part, plenty of nice improvements though unfortunately I was able to keep MC11 up for a full week without issue but have been finding that MC12 has some pretty significant memory leaks that consume 16GB in a day or two at most. I have tabs containing charts with a month's worth of data...
by Henry MultiСharts
16 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

I updated my MC11R9(build 16148) to MC12 on the first day released. When MC12 was opening my workspace, I found the CPU usage is far less than MC11(which is good,MC11 usually takes almost 9x% cpu usage,for one workspace, and I got four to open...... :cry: ), however, it turned out that MC12 opens s...
by Henry MultiСharts
16 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

eegroup wrote:Any ETA for MultiCharts Release 2?
eegroup, no firm ETA at the moment. We'll make it available as soon as we get more feedback about R1 and have the reported issues fixed.
by Henry MultiСharts
15 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Hi Henry ok for .MCReport and .ors format, these are not the problem and it's ok how Multicharts works. The issue remains the export in .csv. When I enable my personal selection of column, when I save the report in .csv file seems that my choice doesn't matter and the only fields exported are alway...
by Henry MultiСharts
14 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

When I export the optimization results in csv format, the "ONLY" fields that have been exported are: Net Profit Gross Profit Gross Loss Total Trades % Profitable Winning Trades Profit Factor and optmized inputs No matter the selection I have previuosly made in settings, even if I change t...
by Henry MultiСharts
13 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

If the BUGS ar NOT solved for the 25th of August, is it possible to have an Hotfix which update the CQG API to the new release to install in MC 11 R9 For me is important to work with a very stable platform which gives me the right records of my trades for my statistical trading reports and for now ...
by Henry MultiСharts
13 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

@general I had a problem with MC12 and IB last week. I really didn't have time to figure out what was happening so I rolled back to MC11. That was not as easy as I expected. Even though I had recompiled the strategy, it refused be recognized as compiled. I had to fully delete MC11 and reinstall fro...
by Henry MultiСharts
13 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

I have been using Interactive Brokers (IB) + MultiCharts for almost 8 years. Last week, I upgraded MC to latest version (ver 12, 64bit). The connection failed. Below is the log and QuoteManager. Does anyone have similar problem? Please send us the logs for analysis when the issue appears. Go to Hel...
by Henry MultiСharts
13 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

MultiCharts 12.0 Release is available for download now (64 bit build 16642)! *To receive the 32-bit installer file please contact support directly.". ..... When will MC 12 (32bit) be officially released? Thanks general, it is already available on demand. Email to support to receive the downloa...
by Henry MultiСharts
13 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Multicharts 12 has a completly WRONG Trades SUMMARY in the Order & Position Tracker It gives back as result a negative performance history since last 2 months and since the beginning of the year while in reality I'm wide positive It's TOTALLY Wrong in number of trades, GAIN/Loss in the period, ...
by Henry MultiСharts
13 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Unless we are missing something someplace, the Bold Face font option is inoperable in MC 12.0. Whether the "Bold" checkbox is checked or not, all text is displayed as "Regular" non-Bold fonts. Reference the Format Price Scale, Format Time Scale, Text plotting, etc. Seems that al...
by Henry MultiСharts
13 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

When I export the optimization results in csv format, the "ONLY" fields that have been exported are: Net Profit Gross Profit Gross Loss Total Trades % Profitable Winning Trades Profit Factor and optmized inputs No matter the selection I have previuosly made in settings, even if I change t...
by Henry MultiСharts
13 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Rectified the issue with the Ctrl+S and Ctrl+P hotkeys not working in the Performance Report window: https://www.multicharts.com/pm/public/multicharts/issues/MC-2215 Henry. The above usability improvement worked smoothly in regards to utilizing CTRL+S and CTRL+P keyboard shortcuts, but it seems to ...
by Henry MultiСharts
10 Aug 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE
Replies: 10
Views: 1245

Re: MULTICHARTS .NET 12.0 RELEASE

Multicharts.Net 12 crashed upon opening one workspace. There was no problem for Multicharts.Net 11. crash.png I have sent the log. Please find attached the hotfix for this issue. You need to save the file, unzip it and follow the installation guide: http://www.multicharts.com/trading-software/index...
by Henry MultiСharts
10 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

CrazyNasdaq, please send us the logs for analysis from your current MultiCharts platform: go to Help tab->Feedback (or Windows Start menu->All programs->MultiCharts64->Feedback). Select two options: - Attach log files to help us understand what happened - Upload collected data to Help Desk. Uncheck ...
by Henry MultiСharts
10 Aug 2018
Forum: MultiCharts
Topic: Symbol Mapping MGC with IB
Replies: 10
Views: 1340

Re: Symbol Mapping MGC with IB

Hello David, Thanks for your feedback. Unfortunately this is not something that is possible with PowerLanguage within the current architecture. You may consider using "unmanaged orders approach" in MultiCharts .NET for this purpose: http://www.multicharts.com/discussion/viewtopic.php?f=19&...
by Henry MultiСharts
10 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

strelow wrote:comands : Arw_New ,Text_New not working
strelow, it works OK on our end. Please check your code.

Code: Select all

if(mod(currentbar, 2) = 0) then text_new(date, time, high, "bar") else arw_new(date, time, low, true);
by Henry MultiСharts
10 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Henry MultiСharts wrote:
arnie wrote:-Why can't I have letters with size 6 or even lower? It's stuck at 8. Can't go lower.
arnie, we will check that and provide an update.
arnie, in MultiCharts 12 Release 2 we will make the smallest supported TPO Font Size = 4.
by Henry MultiСharts
10 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

"This is a critical update for the CQG users. In order to be able to continue receiving CQG data you need to install this build before CQG Server update on 08/10/18!" CQG has postponed rolling out this update until 08/25/18. The corresponding info has been updated in the related posts/top...
by Henry MultiСharts
10 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

In view of the above, and "This is a critical update for the CQG users. In order to be able to continue receiving CQG data you need to install this build before CQG Server update on 08/10/18!" what do you suggest for CQG users? Please find attached the hotfix for this issue. You need to s...
by Henry MultiСharts
09 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

-Why can't I have letters with size 6 or even lower? It's stuck at 8. Can't go lower. arnie, we will check that and provide an update. -Why when we zoom out letters become blocks? I want to see letters not blocks. If I want to see blocks I choose blocks, not letters. When it becomes impossible to r...
by Henry MultiСharts
09 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Hello, After installing on 12, many indicators will no longer be displayed in the chart. Under Format Objects the status is then Unverified and the SubChart is set to Hidden. Unfortunately, Multicharts 12 is then unusable and a return to 11 is not possible without backup. Please help. Kinko Hyo, th...
by Henry MultiСharts
09 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

Henry I tried this simple statement in an indicator to test the function and it came back with compile error line 0 column 0; value99=TPO_levels_Value(162.24,1); print(d,time_s,value99); Please could you tell me what the problem might be. jl12, if you are running Windows 10, then such error can app...
by Henry MultiСharts
09 Aug 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE
Replies: 10
Views: 1245

Re: MULTICHARTS .NET 12.0 RELEASE

Multicharts.Net 12 has an issue that eSignal SHE stock (for example 000063-SHE, 002021-SHE) Day bar doesn't show today's bar if the market is closed. The today's Day bar only shows up until there is a realtime update received. For the eSignal data provider the current daily bar is received from the...
by Henry MultiСharts
09 Aug 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE
Replies: 10
Views: 1245

Re: MULTICHARTS .NET 12.0 RELEASE

wzero wrote:I had clicked the "Send Log" button.
However, I have reconstructed the workspace which worked fine so far.
wzero, if you still have a copy of the workspace that had the issue - please send it to me for analysis.
by Henry MultiСharts
08 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

Re: MULTICHARTS 12.0 RELEASE

jl12, TPO commands help file is in the works. I can share with you the draft: TPO_Settings_Base Returns the base for TPO resolution, 0 for ticks, 1 for minutes. This value is set in the Chart Type section of the Settings tab within the Format Instrument dialog for a chart. Usage TPO_Settings_Base Ex...
by Henry MultiСharts
08 Aug 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE
Replies: 10
Views: 1245

Re: MULTICHARTS .NET 12.0 RELEASE

wzero, thanks for your feedback. Your bug report does not contain any dumps for the crash analysis. If this is a repeating issue when using this workspace - please email it to me for further analysis.
by Henry MultiСharts
08 Aug 2018
Forum: MultiCharts .NET
Topic: [UPDATED 08/23/18] Attention CQG users
Replies: 1
Views: 905

[UPDATED 08/23/18] Attention CQG users

Dear users,

CQG is conducting an upgrade to their infrastructure on September 7th.
In order to continue receiving CQG data you need to update MultiCharts to version 12.0 Release before this date.

Go to MultiCharts 12.0 Release download page
Go to MultiCharts .NET 12.0 Release download page
by Henry MultiСharts
08 Aug 2018
Forum: MultiCharts .NET
Topic: MULTICHARTS .NET 12.0 RELEASE
Replies: 10
Views: 1245

MULTICHARTS .NET 12.0 RELEASE

MultiCharts .NET 12.0 Release is available for download now (64 bit build 16644)! *To receive the 32-bit installer file please contact support directly. Featuring Time Price Opportunity analysis (TPO) chart type, Matrix Optimization, Strategy Robustness, Kase bars, reworked optimization GUI, Bittre...
by Henry MultiСharts
08 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE
Replies: 119
Views: 8957

MULTICHARTS 12.0 RELEASE

MultiCharts 12.0 Release is available for download now (64 bit build 16642)! *To receive the 32-bit installer file please contact support directly. Featuring Time Price Opportunity analysis (TPO) chart type, Matrix Optimization, Strategy Robustness, Kase bars, reworked optimization GUI, Bittrex dat...
by Henry MultiСharts
07 Aug 2018
Forum: MultiCharts .NET
Topic: How to retrieve a strategy name? [SOLVED]
Replies: 1
Views: 181

Re: How to retrieve a strategy name? [SOLVED]

Hello Tartalognion,

Check the Name property inherited from CStudyControl.
by Henry MultiСharts
01 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE CANDIDATE
Replies: 44
Views: 2755

Re: MULTICHARTS 12.0 RELEASE CANDIDATE

Smoky wrote:Abour reverse orders You have this PM too:

https://www.multicharts.com/pm/public/multicharts/issues/MC-662
I have updated this PM entry.
by Henry MultiСharts
01 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE CANDIDATE
Replies: 44
Views: 2755

Re: MULTICHARTS 12.0 RELEASE CANDIDATE

Smoky wrote:reminder : My strategy orders (reversal order buy / sell market 1 contract) are not send to my broker IB. They don't have order ID they are not in order tab or in chart.
Please provide the information I have requested and continue the communication via email.
by Henry MultiСharts
01 Aug 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE CANDIDATE
Replies: 44
Views: 2755

Re: MULTICHARTS 12.0 RELEASE CANDIDATE

wilkinsw wrote:You may have already noticed the spelling mistake
wilkinsw wrote:Also where it says populations below, it should really say generations
Thank you for noticing that. We will have it corrected.
by Henry MultiСharts
01 Aug 2018
Forum: MultiCharts
Topic: CQG weekend update causing order mapping, routing and realtime data issues: WebAPI 2.25 - Release 1.3
Replies: 6
Views: 370

Re: CQG weekend update causing order mapping, routing and realtime data issues: WebAPI 2.25 - Release 1.3

wilkinsw, we are already working on adding the support for the new format. The fix will become available as soon as it is ready, before the changes are done on CQG end.
by Henry MultiСharts
27 Jul 2018
Forum: MultiCharts
Topic: Trying to access future data [SOLVED]
Replies: 11
Views: 2043

Re: Trying to access future data [SOLVED]

Hello McGeorge,

There is no way to access the values of the future bars as they do not exist on the current calculation. Only current and past bars can be accessed.
If you need the DateTime of the next bar - increment the DateTime of the current bar accordingly.
by Henry MultiСharts
27 Jul 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE CANDIDATE
Replies: 44
Views: 2755

Re: MULTICHARTS 12.0 RELEASE CANDIDATE

wilkinsw, thanks for your feedback. It has been forwarded to the dev team.
by Henry MultiСharts
26 Jul 2018
Forum: MultiCharts .NET
Topic: MC.Net 11 PowerLanguage.VolumeProfile.ILevel[] returs always zero values
Replies: 3
Views: 351

Re: MC.Net 11 PowerLanguage.VolumeProfile.ILevel[] returs always zero values

radekj, We got matching results in this mode in all version we've tested (МС .NET 10, 11, 12). Please send me the workspace you are using for replicating this behavior, export of the study you are using, and the data that is used on your chart. You can use the Feedback tool to send us this informati...
by Henry MultiСharts
26 Jul 2018
Forum: MultiCharts
Topic: New Monte Carlo simulator
Replies: 12
Views: 1735

Re: New Monte Carlo simulator

That's awesome Henry. I only though if this yesterday, but could MC look at generating annualised figures from the monte carlo sim too? The excel monte carlo sim I currently use annualises all the metrics which allows side by side comparison between various strategies and instruments: It would be g...
by Henry MultiСharts
26 Jul 2018
Forum: MultiCharts
Topic: [Backtest] Limit fill behaviour very wrong [SOLVED]
Replies: 13
Views: 994

Re: [Backtest] Limit fill behaviour very wrong [SOLVED]

MC12: multi entry 1 mc12.PNG multi entry 2 mc12.PNG Secondary stop placed against the low! literally what is going on?! No more questions your honour. Please get this fixed. MC you need to rollback. It can't be that difficult to see the error, really?! MC's a great platform but lets not get in the ...
by Henry MultiСharts
25 Jul 2018
Forum: MultiCharts
Topic: New Monte Carlo simulator
Replies: 12
Views: 1735

Re: New Monte Carlo simulator

Hello wilkinsw,

Thanks for your feedback. We are going to implement your suggestions in MultiCharts 13.
by Henry MultiСharts
20 Jul 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE CANDIDATE
Replies: 44
Views: 2755

Re: MULTICHARTS 12.0 RELEASE CANDIDATE

Smoky, the current AT/BT engine does not support that and does not have this information, That is required to develop a new engine as specified above. If you want to discuss it or suggest something about it - please do that in the corresponding PM entry.
by Henry MultiСharts
18 Jul 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE CANDIDATE
Replies: 44
Views: 2755

Re: MULTICHARTS 12.0 RELEASE CANDIDATE

Can users please please please review this stop order placement bug in MC12 when backtesting. I've spent hours demonstrating it to MC and they are stonewalling me. It is a very major bug indeed: https://www.multicharts.com/discussion/viewtopic.php?f=1&t=51323&p=129900#p129900 We are re-eval...
by Henry MultiСharts
18 Jul 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE CANDIDATE
Replies: 44
Views: 2755

Re: MULTICHARTS 12.0 RELEASE CANDIDATE

Hello Henry, The treatment of order events is a big step, I read again my post on the subject and in 2015 you promised me a total management orders with MC 9.1. With Multicharts order engine you have to maintain a true condition to maintain that order in the queue, right? how to do it if I do not k...
by Henry MultiСharts
17 Jul 2018
Forum: MultiCharts .NET
Topic: Bars.FullSymbolData.Count
Replies: 6
Views: 467

Re: Bars.FullSymbolData.Count

Jobauma,

Yes, that is possible to program such an indicator. You can remove the plot values using Plot1.Reset.
by Henry MultiСharts
16 Jul 2018
Forum: MultiCharts
Topic: Bitcoin trading with MC possible? [SOLVED]
Replies: 56
Views: 16982

Re: Bitcoin trading with MC possible? [SOLVED]

shane1800 wrote:Hi Henry,
Any ETA on Bitfinex or Poloniex trading API as I'm excited to use MC for crypto trading?
Or can we make a trading connection to Bitfinex API ourselves?
shane1800, this is not something that is in our to-do list at the moment. You can program your own connection plugin using our SDK.
by Henry MultiСharts
16 Jul 2018
Forum: MultiCharts
Topic: MULTICHARTS 12.0 RELEASE CANDIDATE
Replies: 44
Views: 2755

Re: MULTICHARTS 12.0 RELEASE CANDIDATE

My setup : one chart one symbol two stategies. here my log with all orders with timing. all informations are shared corectly from stategy one to the second stategy Good ! but a sell order at 16:25:11:2511 received a buy rejected flag and would be sell rejected flag (margin low). all orders in my lo...
by Henry MultiСharts
13 Jul 2018
Forum: MultiCharts
Topic: Why in 2018 still so difficult to access values from other DataN/indicators
Replies: 10
Views: 410

Re: Why in 2018 still so difficult to access values from other DataN/indicators

Hello ecarlino,

There is the "Study on study" feature:
https://www.multicharts.com/trading-sof ... y_on_study
You can also define an indicator in your code as an input, using the format described in the wiki section.
by Henry MultiСharts
13 Jul 2018
Forum: MultiCharts
Topic: Accessing "openpositionprofit" from within Custom Criteria?
Replies: 3
Views: 217

Re: Accessing "openpositionprofit" from within Custom Criteria?

wilkinsw, these are regular PowerLanguage commands. You can access their values in the custom criterion only via SetCustomFitnessValue,
by Henry MultiСharts
13 Jul 2018
Forum: MultiCharts .NET
Topic: Bars.FullSymbolData.Count
Replies: 6
Views: 467

Re: Bars.FullSymbolData.Count

Hello Jobauma,

Bars.FullSymbolData.Count is the total number of bars on the chart.
Bars.FullSymbolData.CurrentBar = Bars.CurrentBar + ExecInfo.MaxBarsBack.
Bars.CurrentBar is never equal to Bars.FullSymbolData.Count.
by Henry MultiСharts
13 Jul 2018
Forum: MultiCharts
Topic: Data Feed Services for European Stocks
Replies: 1
Views: 182

Re: Data Feed Services for European Stocks

Hello ilag, The amount of data provided by each data provider is different, you can find this information at the following page:  http://www.multicharts.com/market-data-feeds/  Supported security types for each data provider can be found here:  http://www.multicharts.com/trading-software/index.php/S...
by Henry MultiСharts
12 Jul 2018
Forum: MultiCharts
Topic: Code to plot historical data
Replies: 5
Views: 342

Re: Code to plot historical data

MichaelF, ASCII Mapping is dynamic and reads all the data directly from the file each time you request it. You should not mix it up with the ASCII Import, which is a one time data transfer. As for the error you got - make sure the IOData.dll is located in C:\Users\Fab\Desktop\IOData\IOData\Release\....

Go to advanced search